hmmm odd
https://github.com/nanopool/Claymore-Dual-Miner/releases
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 896. (Read 6590718 times)
May 08, 2017, 11:38:00 AM
May 08, 2017, 11:33:07 AM
rx 460 i know they only hash etherium at about 12 m/h but what are they like on Musicoin or Ubiq
as there dags are below 20 also perhaps Expanse anybody tested them
Thanks
as there dags are below 20 also perhaps Expanse anybody tested them
Thanks
Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.4
youtube detected
May 08, 2017, 10:39:41 AM
rx 460 i know they only hash etherium at about 12 m/h but what are they like on Musicoin or Ubiq
as there dags are below 20 also perhaps Expanse anybody tested them
Thanks
as there dags are below 20 also perhaps Expanse anybody tested them
Thanks
May 08, 2017, 09:56:23 AM
Hi Claymore,
I have two rigs on ethOS 1.2.1 with your miner 9.3 Linux version. But in terminal do not work shortcut +/- for -dcri adjustment. Is it working on Linux or I have something wrong ?
Now I mining ETH-only mode but I want to try dual mode with DCR or PASCAL.
Thnx
BTC
I have two rigs on ethOS 1.2.1 with your miner 9.3 Linux version. But in terminal do not work shortcut +/- for -dcri adjustment. Is it working on Linux or I have something wrong ?
Now I mining ETH-only mode but I want to try dual mode with DCR or PASCAL.
Thnx
BTC
I had the same problem, every exchange had to restart !
for me it working dcri on console on linux (simpleminingos) you can always use -dcri N(number) when you start app.
May 08, 2017, 09:51:48 AM
Hi Claymore,
I have two rigs on ethOS 1.2.1 with your miner 9.3 Linux version. But in terminal do not work shortcut +/- for -dcri adjustment. Is it working on Linux or I have something wrong ?
Now I mining ETH-only mode but I want to try dual mode with DCR or PASCAL.
Thnx
BTC
I have two rigs on ethOS 1.2.1 with your miner 9.3 Linux version. But in terminal do not work shortcut +/- for -dcri adjustment. Is it working on Linux or I have something wrong ?
Now I mining ETH-only mode but I want to try dual mode with DCR or PASCAL.
Thnx
BTC
I had the same problem, every exchange had to restart !
May 08, 2017, 09:10:56 AM
Hey, I had start.bash so I changed it to start.bat and now all it does is quickly open and immediatly closes..
start.bash is for Linux.
start.bat is for Windows.
Which operating system are you on?
Most people, especially people of your experience level should use Windows, not Linux.
May 08, 2017, 07:57:02 AM
Can someone actually tell me how to use this miner? Like...there is no proper guide for it...cant even figure how to run it.
1.- Download from Mega
2.- Uncompress to a specific folder
3.- Edit your start.bat
4.- Double click on start.bat and thats it
Examples of start.bat on OP. For more complex config use config file. I am running one r9 390 at 32.3 totally stable at -dcri 31
Hey, I had start.bash so I changed it to start.bat and now all it does is quickly open and immediatly closes..
May 08, 2017, 07:42:49 AM
Hi
Asus strix R9 380 OC 2gb for mined eth + dcr worked???
How much m/h???
Asus strix R9 380 OC 2gb for mined eth + dcr worked???
How much m/h???
Please help me
May 08, 2017, 07:21:32 AM
Can someone actually tell me how to use this miner? Like...there is no proper guide for it...cant even figure how to run it.
1.- Download from Mega
2.- Uncompress to a specific folder
3.- Edit your start.bat
4.- Double click on start.bat and thats it
Examples of start.bat on OP. For more complex config use config file. I am running one r9 390 at 32.3 totally stable at -dcri 31
Hey, I had start.bash so I changed it to start.bat and now all it does is quickly open and immediatly closes..
May 08, 2017, 05:34:11 AM
I can't seem to get the -mvddc option to work on RX570 series on Windows 10.
At the start the miner sais its an unknown switch/option.
The -cvddc, -cclock, -mclock work fine on the other hand.
Strange
At the start the miner sais its an unknown switch/option.
The -cvddc, -cclock, -mclock work fine on the other hand.
Strange
May 08, 2017, 04:14:07 AM
Hey claymore can you add on json console retun also array of cards that make invalid share ? then will be more easy find the wrong card to fix it alias downclock.
example card #3 make 5 invalid share then if i have 6 cards
{[0,0,0,5,0,0]}
Cause i can't stay on monitor all day to check or check logs.
example card #3 make 5 invalid share then if i have 6 cards
{[0,0,0,5,0,0]}
Cause i can't stay on monitor all day to check or check logs.
May 08, 2017, 04:03:07 AM
I have 2 rigs now on ethOS. Today I decide to make another 4 rigs on ethOS all with Claymore miner exactly. I have combinet electricity, solar panels about 6-7kW (maybe I add next 2-3kW this year) and pay electricity for about 0,15 EUR/kW.
But I do not find on stores some good RX480 8GB (XFX, Sapphire,...) and I need 24pcs for 4 rigs. Do you have some tips where to find them or they are sold out ?
If yes, what to buy ? RX570, RX580 or RX470 ?
RX5xx series have 1x 6 pin and 1x 8 pin power supply, which PSU is best for 6 card in one rig ?
thnx for help
But I do not find on stores some good RX480 8GB (XFX, Sapphire,...) and I need 24pcs for 4 rigs. Do you have some tips where to find them or they are sold out ?
If yes, what to buy ? RX570, RX580 or RX470 ?
RX5xx series have 1x 6 pin and 1x 8 pin power supply, which PSU is best for 6 card in one rig ?
thnx for help
May 08, 2017, 03:51:12 AM
Hi Claymore,
I have two rigs on ethOS 1.2.1 with your miner 9.3 Linux version. But in terminal do not work shortcut +/- for -dcri adjustment. Is it working on Linux or I have something wrong ?
Now I mining ETH-only mode but I want to try dual mode with DCR or PASCAL.
Thnx
BTC
I have two rigs on ethOS 1.2.1 with your miner 9.3 Linux version. But in terminal do not work shortcut +/- for -dcri adjustment. Is it working on Linux or I have something wrong ?
Now I mining ETH-only mode but I want to try dual mode with DCR or PASCAL.
Thnx
BTC
May 08, 2017, 02:27:27 AM
I can't use claymore commands to change clocks or voltages without it crashing. I got it working on a 6gpu rx570 setup. But not a 4gpu rx580 setup.
Things I've tried. Full reload of windows.
install drivers by extracting and pointing to that folder. I don't use the actual installer. Have also tried the installer.
DDU.
No afterburner.
no anything.
Tried disabling hdmi and sound options
Something is still holding control of the mem and gpu clocks. When I do use afterburner it all works fine. But if its just windows. Driver and claymore 9.3 it crashes when I change clocks. What's still holding my gpu hostage that I somehow eliminated with my other build. Please help. This has always haunted me.
Things I've tried. Full reload of windows.
install drivers by extracting and pointing to that folder. I don't use the actual installer. Have also tried the installer.
DDU.
No afterburner.
no anything.
Tried disabling hdmi and sound options
Something is still holding control of the mem and gpu clocks. When I do use afterburner it all works fine. But if its just windows. Driver and claymore 9.3 it crashes when I change clocks. What's still holding my gpu hostage that I somehow eliminated with my other build. Please help. This has always haunted me.
May 07, 2017, 11:24:28 PM
Is it possible to assign different pools (or coins) to specific GPUs in a rig?
For example, GPU1 for ETH pool and GPU2 for ETC pool.
For example, GPU1 for ETH pool and GPU2 for ETC pool.
Create 2 bat files for 2 instance. Add -di 0 in first file bat and add -di 1 in second file. Create another bat file if u want 3 instance and add -di 3 in the file.
I used multiple instance to try dcri settings for each card.
May 07, 2017, 10:45:27 PM
Is it possible to assign different pools (or coins) to specific GPUs in a rig?
For example, GPU1 for ETH pool and GPU2 for ETC pool.
For example, GPU1 for ETH pool and GPU2 for ETC pool.
Not in a single instance of the miner. The miner can only use one Ethereum based pool and one of the dual mode coins for all of the cards. However, you can specify which cards to use and then start a second miner instance to mine at a different pool for another card not being used in the first.
May 07, 2017, 10:42:27 PM
Hi
Asus strix R9 380 OC 2gb for mined eth + dcr worked???
How much m/h???
Asus strix R9 380 OC 2gb for mined eth + dcr worked???
How much m/h???
May 07, 2017, 10:27:57 PM
Is it possible to assign different pools (or coins) to specific GPUs in a rig?
For example, GPU1 for ETH pool and GPU2 for ETC pool.
For example, GPU1 for ETH pool and GPU2 for ETC pool.
May 07, 2017, 09:06:53 PM
will test this mod soon, old version worked like a charm for me on 480x
May 07, 2017, 09:06:42 PM
Anyone have a stable mod'd bios for the MSI rx 470 8g Armour card that they would be willing to share with me? I read about people getting the mem clocks up to 2100 mhz, but any time I go over 1850 mhz my cards trip out. I am stuck at 22-23 mh/s and I know people are getting 27+ with the right bios and set up. I would appreciate any help in this area. Thanks.
Mine is modded but I only run it at 1880 MHz for stability. It hashes at just under 27MH/s ETH and about 215MH/s PASC in dual mining mode. Do you have Samsung memory? The mods are memory dependent. If you have Samsung send me a PM and I can send you my VBIOS later.
Jump to: