Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 897. (Read 6590565 times)

Anyone have a stable mod'd bios for the MSI rx 470 8g Armour card that they would be willing to share with me?  I read about people getting the mem clocks up to 2100 mhz, but any time I go over 1850 mhz my cards trip out.  I am stuck at 22-23 mh/s and I know people are getting 27+ with the right bios and set up.  I would appreciate any help in this area.  Thanks.

In the claymore folder click on the "remote manager" folder.

There is a program in their called EthMan. This is the program that allows you to monitor all your Claymore rigs.  You just need to know their ip addresses. By default you can only "monitor" them but if you change the settings you can do things like remotely change their configurations.

That's what I intend to do.  I was just worried that the spare 6 pin socket on the PSU says SATA  and I will be plugging it into a PCIE graphics card riser.

1.- Download from Mega
2.- Uncompress to a specific folder
3.- Edit your start.bat
4.- Double click on start.bat and thats it

Examples of start.bat on OP. For more complex config use config file. I am running one r9 390 at 32.3 totally stable at -dcri 31

Hi everyone how would I go about monitoring 2 rigs on one windows so I can see my "global" hash rate on one machine, I now have 2 rigs and I am just wondering as I have seen some screen shots of people using more than one machine and the hashrate showing up on one window.

Question on power usage.

Dual mining Etherium + Decred on an RX480 I am seeing about 160-watts per card draw for 26 mH Eth and 790 mH Decred.

Calculated by using a Killawatt strip and subtracting idle power from the total draw divided by two (two cards).

Does this seem normal ?

I have the Core clock set down to 1000 and memory up to 2150 on these cards.

I have not taken the BIOS mod plunge just yet.

That miner should work for AMD cards mining ZCL at several pools. I believe it will work at suprnova among others. If you have NVIDIA then you will need a different miner for ZCL ( I use EWBF's Zcash cuda miner for ZCL on NVIDIA).

Thank you for the tip!!
Do you miner ZCLASSIC?

That's not all showing up, but what I can see of it looks incorrect. Follow the directions for Claymore's eth miner here --- https://eth.nanopool.org/help --- just replace the part with your wallett address/worker name/ and email --- don't try setting it up to dual mine until you get it going stable with just Ethereum first.

Thanks, I somehow downloaded an old version (v. and didn't even notice. My bad. Thanks again.

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x52bc44d5378309ee2abf1539bf71de1b7c7be3b5/worker1/[email protected] -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=823147ecc6d363e548194c105fd48d7275f380fcc2fc5147ab2c185f42e27fa5be703b6c1ed2&worker=worker1&email=mail@hotmail.com" -dcoin sia

Well, it is clearly stated how to use claymore's miner. What else do you need? It's not that hard. PLS show us your bat file.

Been trying to figure out for the past hour, still cant even start it yet just some commands there that I dont even know where to put..

Please read the instructions. For example new port on suprnova.

Go to the first post and read it.  It has lots of examples.

You just need to get your own wallet address and change it out with the wallet address in the examples.

Sounds like you are using an older version. DCR had some changes. You need to be on version 9.2 or 9.3.  Any older versions won't be able to mine Dcred any more.

All Dcred miners had to update.

Can someone actually tell me how to use this miner? Like...there is no proper guide for it...cant even figure how to run it.

hello, have some problem's


22:58:31:106   1844   args: -epool eth-ru2.dwarfpool.com:8008 -ewal 0x33798287fdeebd894be5197bae5f2df774cbea60 -eworker gtx580 -epsw x
22:58:31:109   1844   
22:58:31:112   1844   ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
22:58:31:114   1844   є      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      є
22:58:31:117   1844   ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
22:58:31:121   1844   
22:58:31:324   1844   ETH: 1 pool is specified
22:58:31:327   1844   Main Ethereum pool is eth-ru2.dwarfpool.com:8008
22:58:31:330   1844   DCR: 0 pool is specified
22:58:31:367   1844   OpenCL platform: NVIDIA CUDA
22:58:31:370   1844   AMD OpenCL platform not found
22:58:31:396   1844   CUDA initializing...

22:58:31:399   1844   NVIDIA Cards available: 1
22:58:31:402   1844   CUDA Driver Version/Runtime Version: 8.0/8.0
22:58:31:408   1844   GPU #0: GeForce GTX 580, 3072 MB available, 16 compute units, capability: 2.0

22:58:31:411   1844   Total cards: 1
22:58:40:878   1844   No AMD cards in the list, ADL library will not be used.
22:58:40:882   1844   NVML version: 8.381.89
22:58:40:929   2ae8   ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <185.117.152.148> port 8008
22:58:40:952   2ae8   send: {"worker": "gtx580", "jsonrpc": "2.0", "params": ["0x33798287fdeebd894be5197bae5f2df774cbea60", "x"], "id": 2, "method": "eth_submitLogin"}

22:58:40:956   2ae8   ETH: Stratum - Connected (eth-ru2.dwarfpool.com:8008)
22:58:40:970   2ae8   got 39 bytes
22:58:40:973   2ae8   buf: {"id":2,"jsonrpc":"2.0","result":true}

22:58:40:977   2ae8   parse packet: 38
22:58:40:980   2ae8   ETH: Authorized
22:58:40:984   2ae8   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:58:40:988   2ae8   new buf size: 0
22:58:41:012   2ae8   got 244 bytes
22:58:41:015   2ae8   buf: {"result":["0xc9e60b9e7f50f8cd9aa819b2db3b245a5ffd727a30014d11cad6f3ffd0ad9072","0xe586ce62651f6de0be923da595f6773a2d1bd9b41ca0ad927456061ed15c0a14","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:58:41:019   2ae8   parse packet: 242
22:58:41:021   1844   No pool specified for Decred! Ethereum-only mining mode is enabled

22:58:41:025   1844   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

22:58:41:021   2ae8   ETH: job changed
22:58:41:031   2ae8   new buf size: 0
22:58:41:034   1844   ETH: eth-proxy stratum mode
22:58:41:037   1844   Watchdog enabled
22:58:41:040   1844   Remote management (READ-ONLY MODE) is enabled on port 3333
22:58:41:043   1844   

22:58:41:124   1d64   Setting DAG epoch #122...
22:58:42:984   1d64   Setting DAG epoch #122 for GPU0
22:58:42:988   1d64   Create GPU buffer for GPU0
22:58:43:295   1d64   GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
22:58:43:299   1d64   GPU 0, Calc DAG failed!

I am trying to run ETH+DCR mining.
ETH works fine but I always (I tried 3 different pools now) get the error:
dcr: share rejected

Any idea what could help here?

Eagerly await this update