Is there anyway for your next version to add maintenance fee? So we can add % in miner for mining in own address because i have some rigs where i am administrator, and i want to get my % earning. Thanks a lot
I also want that feature.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 900. (Read 6590718 times)
May 06, 2017, 07:47:24 AM
I also want that feature.
May 06, 2017, 07:43:50 AM
Is there anyway for your next version to add maintenance fee? So we can add % in miner for mining in own address because i have some rigs where i am administrator, and i want to get my % earning. Thanks a lot
+ 1 good idea 
May 06, 2017, 07:36:44 AM
Is there anyway for your next version to add maintenance fee? So we can add % in miner for mining in own address because i have some rigs where i am administrator, and i want to get my % earning. Thanks a lot
May 06, 2017, 07:20:48 AM
Hi, im new here. I use your mining client on a 6x470 rig.
My configuration is:
ASUS H170 PRO GAMING
Intel Celeron G3900
4GB DDR4 2133MHz
120GB SATA SSD
4x SAPPHIRE AMD Radeon RX 470 NITRO+ OC 8GB
2x ASUS AMD Radeon RX 470 Strix OC 4GB
Windows 10 x64
16.9.2 crimson driver
I updated BIOS to latest version and did this configurations: Above 4G decoding enabled, DMI max link speed Gen1 and PCIEX16_1 link speed Gen1. All went ok and i saw all 6 gpus, all mined ok (4 sapphire ~24MH/s and 2 asus ~21MH/s). After one restart one of my GPU speed was 4.2MH/s all time. In GPU-Z i see 0 MHz for GPU and Memory clocks.
Here are some logs:
I've tried other drivers, other risers, full OS reinstall and PC rebuild, no solution.
What i know: first time all was ok, then something failed. The GPU connected on the first PCIE x16 port is doing that. Second PCIE x16 and all 4 PCIE x1 are ok.
Can anyone advise me what to do to fix it?
My configuration is:
ASUS H170 PRO GAMING
Intel Celeron G3900
4GB DDR4 2133MHz
120GB SATA SSD
4x SAPPHIRE AMD Radeon RX 470 NITRO+ OC 8GB
2x ASUS AMD Radeon RX 470 Strix OC 4GB
Windows 10 x64
16.9.2 crimson driver
I updated BIOS to latest version and did this configurations: Above 4G decoding enabled, DMI max link speed Gen1 and PCIEX16_1 link speed Gen1. All went ok and i saw all 6 gpus, all mined ok (4 sapphire ~24MH/s and 2 asus ~21MH/s). After one restart one of my GPU speed was 4.2MH/s all time. In GPU-Z i see 0 MHz for GPU and Memory clocks.
Here are some logs:
Code:
+----------------------------------------------------------------+
¦ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3 ¦
+----------------------------------------------------------------+
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 0 pool is specified
Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere, 8192 MB available, 32 compute units
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere, 8192 MB available, 32 compute units
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere, 8192 MB available, 32 compute units
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere, 4096 MB available, 32 compute units
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere, 4096 MB available, 32 compute units
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere, 8192 MB available, 32 compute units
GPU #5 recognized as Radeon RX 470/570
POOL/SOLO version
GPU #0: algorithm ASM
GPU #1: algorithm ASM
GPU #2: algorithm ASM
GPU #3: algorithm ASM
GPU #4: algorithm ASM
GPU #5: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 6
ETH: Stratum - connecting to 'eu1.ethermine.org' <51.255.64.43> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #121...
Setting DAG epoch #121 for GPU5
Setting DAG epoch #121 for GPU0
Create GPU buffer for GPU0
Setting DAG epoch #121 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #121 for GPU4
Create GPU buffer for GPU4
Setting DAG epoch #121 for GPU1
Create GPU buffer for GPU1
Setting DAG epoch #121 for GPU2
Create GPU buffer for GPU5
Create GPU buffer for GPU2
ETH: 05/05/17-16:56:23 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
GPU0 DAG creation time - 5000 ms
Setting DAG epoch #121 for GPU0 done
GPU1 DAG creation time - 5011 ms
Setting DAG epoch #121 for GPU1 done
GPU5 DAG creation time - 5018 ms
Setting DAG epoch #121 for GPU5 done
GPU2 DAG creation time - 5028 ms
Setting DAG epoch #121 for GPU2 done
GPU3 DAG creation time - 5983 ms
Setting DAG epoch #121 for GPU3 done
ETH: 05/05/17-16:56:32 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 118.720 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 24.415 Mh/s, GPU1 24.456 Mh/s, GPU2 24.294 Mh/s, GPU3 21.109 Mh/s, GPU4 0.000 Mh/s, GPU5 24.446 Mh/s
ETH: 05/05/17-16:56:33 - SHARE FOUND - (GPU 3)
ETH: Share accepted (94 ms)!
ETH: 05/05/17-16:56:36 - SHARE FOUND - (GPU 5)
ETH: Share accepted (93 ms)!
GPU4 DAG creation time - 15332 ms
Setting DAG epoch #121 for GPU4 done
GPU0 t=54C fan=38%, GPU1 t=35C fan=0%, GPU2 t=66C fan=27%, GPU3 t=63C fan=25%, GPU4 t=69C fan=33%, GPU5 t=57C fan=21%
ETH: 05/05/17-16:57:04 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.160 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:00
ETH: GPU0 24.463 Mh/s, GPU1 24.445 Mh/s, GPU2 24.364 Mh/s, GPU3 21.123 Mh/s, GPU4 4.301 Mh/s, GPU5 24.464 Mh/s
ETH: 05/05/17-16:57:24 - SHARE FOUND - (GPU 1)
ETH: Share accepted (62 ms)!
GPU0 t=58C fan=56%, GPU1 t=38C fan=0%, GPU2 t=71C fan=41%, GPU3 t=69C fan=36%, GPU4 t=72C fan=38%, GPU5 t=65C fan=30%
ETH: 05/05/17-16:57:42 - SHARE FOUND - (GPU 5)
ETH: Share accepted (78 ms)!
ETH: 05/05/17-16:57:46 - SHARE FOUND - (GPU 1)
ETH: Share accepted (78 ms)!
ETH: 05/05/17-16:58:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.223 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 24.444 Mh/s, GPU1 24.456 Mh/s, GPU2 24.469 Mh/s, GPU3 21.101 Mh/s, GPU4 4.301 Mh/s, GPU5 24.451 Mh/s
ETH: 05/05/17-16:58:09 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 122.904 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 24.442 Mh/s, GPU1 24.464 Mh/s, GPU2 24.405 Mh/s, GPU3 21.079 Mh/s, GPU4 4.301 Mh/s, GPU5 24.214 Mh/s
GPU0 t=60C fan=57%, GPU1 t=40C fan=0%, GPU2 t=74C fan=42%, GPU3 t=72C fan=39%, GPU4 t=74C fan=38%, GPU5 t=69C fan=35%
ETH: 05/05/17-16:58:13 - SHARE FOUND - (GPU 3)
ETH: Share accepted (78 ms)!
ETH: 05/05/17-16:58:14 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 122.268 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
ETH: GPU0 24.443 Mh/s, GPU1 24.439 Mh/s, GPU2 23.517 Mh/s, GPU3 21.096 Mh/s, GPU4 4.301 Mh/s, GPU5 24.472 Mh/s
ETH: 05/05/17-16:58:16 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 122.650 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
ETH: GPU0 24.443 Mh/s, GPU1 24.449 Mh/s, GPU2 24.412 Mh/s, GPU3 21.099 Mh/s, GPU4 4.301 Mh/s, GPU5 23.947 Mh/s
ETH: 05/05/17-16:58:20 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.135 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
ETH: GPU0 24.443 Mh/s, GPU1 24.462 Mh/s, GPU2 24.383 Mh/s, GPU3 21.097 Mh/s, GPU4 4.301 Mh/s, GPU5 24.448 Mh/s
Code:
+----------------------------------------------------------------+
¦ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3 ¦
+----------------------------------------------------------------+
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 0 pool is specified
Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere, 8192 MB available, 32 compute units
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere, 8192 MB available, 32 compute units
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere, 4096 MB available, 32 compute units
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere, 8192 MB available, 32 compute units
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere, 8192 MB available, 32 compute units
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere, 4096 MB available, 32 compute units
GPU #5 recognized as Radeon RX 470/570
POOL/SOLO version
GPU #0: algorithm ASM
GPU #1: algorithm ASM
GPU #2: algorithm ASM
GPU #3: algorithm ASM
GPU #4: algorithm ASM
GPU #5: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 6
ETH: Stratum - connecting to 'eu1.ethermine.org' <51.255.64.43> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
ETH: Authorized
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Setting DAG epoch #121...
ETH: 05/05/17-17:03:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
Setting DAG epoch #121 for GPU4
Setting DAG epoch #121 for GPU5
Setting DAG epoch #121 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #121 for GPU0
Create GPU buffer for GPU0
Setting DAG epoch #121 for GPU2
Create GPU buffer for GPU2
Create GPU buffer for GPU4
Setting DAG epoch #121 for GPU1
Create GPU buffer for GPU5
Create GPU buffer for GPU1
GPU0 DAG creation time - 4996 ms
Setting DAG epoch #121 for GPU0 done
GPU3 DAG creation time - 5012 ms
Setting DAG epoch #121 for GPU3 done
GPU1 DAG creation time - 5046 ms
Setting DAG epoch #121 for GPU1 done
GPU4 DAG creation time - 5072 ms
Setting DAG epoch #121 for GPU4 done
GPU5 DAG creation time - 5956 ms
Setting DAG epoch #121 for GPU5 done
GPU2 DAG creation time - 15361 ms
Setting DAG epoch #121 for GPU2 done
ETH: 05/05/17-17:03:27 - SHARE FOUND - (GPU 1)
ETH: Share accepted (78 ms)!
ETH: 05/05/17-17:03:29 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.174 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 24.448 Mh/s, GPU1 24.446 Mh/s, GPU2 4.302 Mh/s, GPU3 24.446 Mh/s, GPU4 24.432 Mh/s, GPU5 21.101 Mh/s
GPU0 t=59C fan=56%, GPU1 t=48C fan=0%, GPU2 t=71C fan=34%, GPU3 t=70C fan=33%, GPU4 t=70C fan=35%, GPU5 t=68C fan=31%
Code:
+----------------------------------------------------------------+
¦ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3 ¦
+----------------------------------------------------------------+
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 0 pool is specified
Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere, 8192 MB available, 32 compute units
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere, 8192 MB available, 32 compute units
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere, 4096 MB available, 32 compute units
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere, 8192 MB available, 32 compute units
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere, 8192 MB available, 32 compute units
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere, 4096 MB available, 32 compute units
GPU #5 recognized as Radeon RX 470/570
POOL/SOLO version
GPU #0: algorithm ASM
GPU #1: algorithm ASM
GPU #2: algorithm ASM
GPU #3: algorithm ASM
GPU #4: algorithm ASM
GPU #5: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 6
ETH: Stratum - connecting to 'eu1.ethermine.org' <51.255.64.43> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #121...
Setting DAG epoch #121 for GPU1
Create GPU buffer for GPU1
Setting DAG epoch #121 for GPU0
Create GPU buffer for GPU0
Setting DAG epoch #121 for GPU4
Create GPU buffer for GPU4
Setting DAG epoch #121 for GPU5
Setting DAG epoch #121 for GPU2
Setting DAG epoch #121 for GPU3
Create GPU buffer for GPU5
Create GPU buffer for GPU3
Create GPU buffer for GPU2
GPU0 DAG creation time - 4986 ms
Setting DAG epoch #121 for GPU0 done
GPU1 DAG creation time - 4972 ms
Setting DAG epoch #121 for GPU1 done
GPU4 DAG creation time - 4993 ms
Setting DAG epoch #121 for GPU4 done
GPU3 DAG creation time - 4986 ms
Setting DAG epoch #121 for GPU3 done
GPU5 DAG creation time - 5928 ms
Setting DAG epoch #121 for GPU5 done
GPU2 DAG creation time - 15269 ms
Setting DAG epoch #121 for GPU2 done
ETH: 05/06/17-03:46:23 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.465 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 24.508 Mh/s, GPU1 24.515 Mh/s, GPU2 4.288 Mh/s, GPU3 24.509 Mh/s, GPU4 24.500 Mh/s, GPU5 21.145 Mh/s
GPU0 t=56C fan=46%, GPU1 t=42C fan=0%, GPU2 t=62C fan=22%, GPU3 t=60C fan=22%, GPU4 t=62C fan=24%, GPU5 t=60C fan=22%
ETH: 05/06/17-03:46:52 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.148 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 24.459 Mh/s, GPU1 24.460 Mh/s, GPU2 4.301 Mh/s, GPU3 24.445 Mh/s, GPU4 24.385 Mh/s, GPU5 21.097 Mh/s
ETH: 05/06/17-03:47:04 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 123.260 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 24.480 Mh/s, GPU1 24.487 Mh/s, GPU2 4.301 Mh/s, GPU3 24.444 Mh/s, GPU4 24.450 Mh/s, GPU5 21.098 Mh/s
GPU0 t=59C fan=57%, GPU1 t=44C fan=0%, GPU2 t=69C fan=38%, GPU3 t=68C fan=35%, GPU4 t=69C fan=38%, GPU5 t=66C fan=33%
I've tried other drivers, other risers, full OS reinstall and PC rebuild, no solution.
What i know: first time all was ok, then something failed. The GPU connected on the first PCIE x16 port is doing that. Second PCIE x16 and all 4 PCIE x1 are ok.
Can anyone advise me what to do to fix it?
May 06, 2017, 07:12:08 AM
Quick question...
Is there any way to get Nicehash to call on the Claymore Dual Miner using an nVidia card ?
I've been able to do it on all of my AMD GPU systems no problem but the nVidia system calls on the standard "ethminer" in Nicehash and I cannot seem to get it to use Claymore.
Is there any way to get Nicehash to call on the Claymore Dual Miner using an nVidia card ?
I've been able to do it on all of my AMD GPU systems no problem but the nVidia system calls on the standard "ethminer" in Nicehash and I cannot seem to get it to use Claymore.
May 06, 2017, 01:27:39 AM
I have built two rigs to replace my old rig(7950) and they both have 5 x 580 MSI Gaming.
I have two questions :-
1)I have switched the mining address to Bitterx, as syncing eth is so time consuming - any comments ?
2)The cards are pulling roughly 100 watts but I could tune more but need more time. Does anyone mine with a 480/580 and mine a second coin ?
Thanks in advance
I have two questions :-
1)I have switched the mining address to Bitterx, as syncing eth is so time consuming - any comments ?
2)The cards are pulling roughly 100 watts but I could tune more but need more time. Does anyone mine with a 480/580 and mine a second coin ?
Thanks in advance
May 06, 2017, 01:05:39 AM
I seem to have an issue, well two issues.
#1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.
#2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.
** clip **
#1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.
#2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.
** clip **
Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.
I'll give that a try if I can't narrow down the issue, maybe I got a bad riser or the psu is overloaded.
Edit:
Things going smoothly for a bit now, I believe it was too many risers on one power line. These RX cards draw too much from from the board/riser they need a second pcie connector IMO.
Edit2:
I can see from the pool it's hung up, guess it's not the riser power. OMG this is going to take hours to figure out...
May 05, 2017, 09:21:40 PM
New to Ether mining (I mine BTC with ASICs) I have tried several mining programs for Ether, including MinerGate, which was the first I tried using, which installed the DAG (I have a feeling this is my issue). Once the DAG was completed it let me use my CPU to mine but not my GPU. When I tried using Claymore, something seemingly similar happens and it gets "hung" on something. Here's a log of how far the miner gets before it gets stuck. Any advice would be greatly appreciated.
21:56:59:179 2240 args: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 -epool us1.ethpool.org:3333 -ewal 0xaC7f2d537580beC57a90C684159425A462BAfc89 -epsw x -esm 1 -mode 1 -tt 80 -asm 0
21:56:59:182 2240
21:56:59:185 2240 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:56:59:187 2240 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3 º
21:56:59:190 2240 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:56:59:192 2240
21:56:59:395 2240 ETH: 1 pool is specified
21:56:59:399 2240 Main Ethereum pool is us1.ethpool.org:3333
21:56:59:513 2240 OpenCL platform: AMD Accelerated Parallel Processing
21:56:59:517 2240 OpenCL initializing...
21:56:59:519 2240 AMD Cards available: 2
21:56:59:522 2240 GPU #0: Hawaii, 4096 MB available, 44 compute units
21:56:59:526 2240 GPU #0 recognized as Radeon 290X
21:56:59:529 2240 GPU #1: Hawaii, 4096 MB available, 44 compute units
21:56:59:532 2240 GPU #1 recognized as Radeon 290X
21:56:59:534 2240 POOL/SOLO version
21:56:59:538 2240 b343
21:56:59:540 2240 Platform: Windows
21:56:59:579 2240 start building OpenCL program for GPU 0...
21:56:59:759 2240 done
21:56:59:977 2240 start building OpenCL program for GPU 1...
EDIT: After some more forum searching, people hinted to outdated/missing OpenCL drivers (which I was quite sure I had installed), but after installing several updates and a new package it's now hashing.
21:56:59:179 2240 args: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 -epool us1.ethpool.org:3333 -ewal 0xaC7f2d537580beC57a90C684159425A462BAfc89 -epsw x -esm 1 -mode 1 -tt 80 -asm 0
21:56:59:182 2240
21:56:59:185 2240 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:56:59:187 2240 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3 º
21:56:59:190 2240 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:56:59:192 2240
21:56:59:395 2240 ETH: 1 pool is specified
21:56:59:399 2240 Main Ethereum pool is us1.ethpool.org:3333
21:56:59:513 2240 OpenCL platform: AMD Accelerated Parallel Processing
21:56:59:517 2240 OpenCL initializing...
21:56:59:519 2240 AMD Cards available: 2
21:56:59:522 2240 GPU #0: Hawaii, 4096 MB available, 44 compute units
21:56:59:526 2240 GPU #0 recognized as Radeon 290X
21:56:59:529 2240 GPU #1: Hawaii, 4096 MB available, 44 compute units
21:56:59:532 2240 GPU #1 recognized as Radeon 290X
21:56:59:534 2240 POOL/SOLO version
21:56:59:538 2240 b343
21:56:59:540 2240 Platform: Windows
21:56:59:579 2240 start building OpenCL program for GPU 0...
21:56:59:759 2240 done
21:56:59:977 2240 start building OpenCL program for GPU 1...
EDIT: After some more forum searching, people hinted to outdated/missing OpenCL drivers (which I was quite sure I had installed), but after installing several updates and a new package it's now hashing.
May 05, 2017, 08:29:56 PM
How to find right gpu with problem?
i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.
i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.
If you press a number in the command prompt window that GPU will stop mining. For example you press 0 and GPU0 will stop mining. You press 4 and GPU4 will stop mining. If you press the number again the miner will start mining again. So you can press all the numbers and stop them from mining one at a time. Then maybe you can figure out which one has the overclocking issue?
May 05, 2017, 07:41:03 PM
Newbie question, I have several rigs on linux running claymore without any problem, however I just install claymore on my PC and I cannot modify the gpu mem or core voltage on a R9 390 Powercolor 8G but I can OC the core via -cclock. Is this normal? I read on the web that I can change mem and undervolt using MSI AB but my card dont want to take the underclock. I am using Crisom 15.12. In the OP say that AMD block underclocking so that the reason for claymore miner to not accept -mclock but using MSI AB should I can?
Thanks
Thanks
May 05, 2017, 04:20:29 PM
May 05, 2017, 02:00:34 PM
I have a spare 6 pin sata port on my EVGA supernova modular PSU. If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?
I really need an answer to this if anybody could help
THERE ARE NEW MODEL PCIE RISER CARDS--
These new models have 6-pin female PCIe connectors on the upper component card, with the graphic -card slot. It would be physically possible to use a male-male PSU PCIe cable to power the card, rather than a SATA-to-6-pin PCIe adapter supplied with the riser kit.
1) I don't know the answer.
2) The riser card was not designed that way.
3) You could do ground-breaking research and try it on an old graphics card you no longer need. Be sure to make a video of the process.
It may very well work, the new riser cards have over-voltage protection. --scryptr
May 05, 2017, 01:41:36 PM
Hi Claymore,
I have this error just before miner restarts. Sometimes after 50+ hours, sometimes after 20-30 hours of mining. I use Nicehash miner.
This is a peak to the log file:
[2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
[2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 20000 ms
[2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 40000 ms
[2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 80000 ms
[2017-05-05 20:28:25] [INFO] [NICEHASH] Balance get
[2017-05-05 20:28:27] [INFO] [NICEHASH] SMA get
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 160000 ms
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] MAX cool time exceeded. RESTARTING
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Restarting miner..
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Shutting down miner
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill all miner processes for this instance:
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Nothing to kill [pid(24904)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Process with an Id of 24904 is not running.
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)]
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Exception killing [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Access is denied
[2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Starting miner [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] -di 01 -dcri 20,20 -asm 2,2 -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal zzzxxxccc -mport 127.0.0.1:4000 -esm 3 -epsw x -allpools 1 -dcoin dcr -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal cccxxxzzz -dbg -1
[2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Starting cooldown checker
[2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
[2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
[2017-05-05 20:29:45] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
[2017-05-05 20:29:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid
I have this error just before miner restarts. Sometimes after 50+ hours, sometimes after 20-30 hours of mining. I use Nicehash miner.
This is a peak to the log file:
[2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
[2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 20000 ms
[2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 40000 ms
[2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 80000 ms
[2017-05-05 20:28:25] [INFO] [NICEHASH] Balance get
[2017-05-05 20:28:27] [INFO] [NICEHASH] SMA get
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 160000 ms
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] MAX cool time exceeded. RESTARTING
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Restarting miner..
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Shutting down miner
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill all miner processes for this instance:
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Nothing to kill [pid(24904)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Process with an Id of 24904 is not running.
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)]
[2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Exception killing [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Access is denied
[2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Starting miner [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] -di 01 -dcri 20,20 -asm 2,2 -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal zzzxxxccc -mport 127.0.0.1:4000 -esm 3 -epsw x -allpools 1 -dcoin dcr -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal cccxxxzzz -dbg -1
[2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Starting cooldown checker
[2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
[2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
[2017-05-05 20:29:45] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
[2017-05-05 20:29:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid
May 05, 2017, 01:25:16 PM
How to find right gpu with problem?
i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.
i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.
May 05, 2017, 01:18:07 PM
May 05, 2017, 01:05:48 PM
I got the dual mining working via Nicehash.
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares.
Okay that must be it -- I have an older version.
Yep... exactly it. I updated the miner in my Nicehash folder and Decred works now.
Thanks!
May 05, 2017, 01:03:47 PM
May 05, 2017, 12:53:51 PM
I got the dual mining working via Nicehash.
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.
I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.
Ideas on that ?
What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares.
Okay that must be it -- I have an older version.
May 05, 2017, 12:44:32 PM
May 05, 2017, 12:30:37 PM
Jump to: