new driver guys Radeon Software Adrenalin Edition 19.8.1
and it mention that
Radeon Performance Metrics may report incorrect VRAM utilization.
any one try it for RX 5700 XT
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 96. (Read 6590565 times)
August 12, 2019, 12:45:56 PM
August 12, 2019, 12:34:11 PM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hhttp://prntscr.com/orllyp
Keep in mind you have to add 30-50W for the fan's.
Fans on videocards, even if card have 3 of them, use only several watts of power.
August 12, 2019, 12:33:22 PM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hhttp://prntscr.com/orllyp
August 12, 2019, 11:56:31 AM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hhttp://prntscr.com/orllyp
August 12, 2019, 11:45:04 AM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hhttp://prntscr.com/orllyp
Keep in mind you have to add 30-50W for the fan's.
August 12, 2019, 10:52:53 AM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hhttp://prntscr.com/orllyp
August 12, 2019, 09:52:58 AM
August 12, 2019, 08:13:06 AM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hhttp://prntscr.com/orllyp
August 12, 2019, 04:50:24 AM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/hHe is actually correct, and I didn't know it either but apparently with the R9 290/390 you can mine at 30MH/s again if you do it with certain drivers, OS, and mining software.
I had a similiar issue where I used to mine 30MH/s with my R9 290 since 2016 and in 2018 it started to slow down to like 20MH/s before I shut it off. I assumed it was some DAG thrashing bug and just unplugged it.
However there is another thread going on in this category of mining where people were able to mine with their Hawaii GPUs again at 30MHs. However you can't do it on Windows. So search the forums if you need instructions on how to do it.
But keep in mind the GPU will use at least 200 Watts of power.
August 12, 2019, 03:04:37 AM
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
give us a screenshot for r9 390 in ETC/ETH with 30M/h August 11, 2019, 12:54:12 PM
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
this is not a solvable problem for eth/etc.can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
you must mining altcoin with low dag-epoh - Expanse(EXP), Ubiq(UBQ), Dubaicoin(DBIX), ect.
old card 39x and 79xx decrise speed with each epoh low and low.
The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os
August 10, 2019, 04:31:52 PM
@claymore
Man i can't wait for you to update something on the XT.
On the edge of our seats man!
Man i can't wait for you to update something on the XT.
On the edge of our seats man!
New version with Navi cards support is ready, I will release it when AMD releases DAG-fix drivers, it will be soon.
Great. Any info on the expected hashrate with XT? Thanks.
August 10, 2019, 12:21:27 PM
@Claymore
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
test strap and rxboost options
your card rate 30+ but 300+watt per card.....
August 10, 2019, 12:07:01 PM
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
this is not a solvable problem for eth/etc.can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
you must mining altcoin with low dag-epoh - Expanse(EXP), Ubiq(UBQ), Dubaicoin(DBIX), ect.
old card 39x and 79xx decrise speed with each epoh low and low.
August 10, 2019, 11:02:23 AM
@Claymore
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks
August 10, 2019, 09:33:15 AM
@claymore
Man i can't wait for you to update something on the XT.
On the edge of our seats man!
Man i can't wait for you to update something on the XT.
On the edge of our seats man!
New version with Navi cards support is ready, I will release it when AMD releases DAG-fix drivers, it will be soon.
Don’t you know are they going to release driver with Radeon 7 over 8gb slow memory access fix? It will help a lot fir some memory-heavy algos.
August 10, 2019, 01:42:44 AM
[/quote]
This is not phoenixminer's thread. Here is Claymore's thread.
[/quote]
again its not just phoenix miner its any miner you can run with the Claymore straps running. Regardless of that, I don't mine with phoenix i use strictly Claymore for my ETH mining. Thus my anxiousness about him releasing stuff on the XT I want to share experiences work on getting better and better settings with the Claymore Miner.
August 09, 2019, 09:48:52 AM
Mining on Phoenix Miner and Wildrig-multi using the manner of Claymore cards AMD
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s
Hmm... RedPanda and I have been discussing this in our channels since 14.2.
Last week Red Panda Mining literally just made a video on this.
https://www.youtube.com/watch?v=XPyXN4fnH9s
Notice its dated August 4th.
::shakes head:: OI.. vay.
@claymore
Man i can't wait for you to update something on the XT. It works pretty decently on wildrig i really want to get it on Eth!!
On the edge of our seats man!
August 09, 2019, 05:12:43 AM
@claymore
Man i can't wait for you to update something on the XT.
On the edge of our seats man!
Man i can't wait for you to update something on the XT.
On the edge of our seats man!
New version with Navi cards support is ready, I will release it when AMD releases DAG-fix drivers, it will be soon.
August 09, 2019, 01:54:50 AM
Mining on Phoenix Miner and Wildrig-multi using the manner of Claymore cards AMD
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s
Hmm... RedPanda and I have been discussing this in our channels since 14.2.
Last week Red Panda Mining literally just made a video on this.
https://www.youtube.com/watch?v=XPyXN4fnH9s
Notice its dated August 4th.
::shakes head:: OI.. vay.
@claymore
Man i can't wait for you to update something on the XT. It works pretty decently on wildrig i really want to get it on Eth!!
On the edge of our seats man!
Jump to: