Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 148.

stealth2600

newbie

Activity: 35

Merit: 0

Quote from: Claymore on February 20, 2017, 09:32:18 AM

Quote from: stealth2600 on February 20, 2017, 09:24:21 AM

Quote from: Claymore on February 20, 2017, 08:00:29 AM

v12.1:

- slightly improved speed for some cards, about 410H/s on stock 390X, 450H/s on stock Nano, 290H/s on stock 280X, 300H/s on stock RX480.
- slightly improved stability. If it is still unstable for you, reduce "-i" value.
- fixed issue with wrong hashrate when "-li" or "-ttli" options enabled.

Did you make any improvements for Tonga cards in this release?

Yes but not much, I see 193->200H/s on my stock 380. I don't plan any further good speedup for Tonga, these cards are really weak for zcash.

Thanks Claymore! Any improvements for Tonga cards are always appreciated. On my 380X 4GB OCed at 1080/1550 I'm able to consistently keep 210 h/s using -i 6 and its been stable for several hours now. Based upon your comment, it sounds like some of us need to start considering upgrading to new hardware or mining another cryptocurrency if we'd like to keep using Tonga cards. If I decide to building another mining rig for zcash, what cards do you find the best? Is there a particular one you'd recommend?

CitricAcid

newbie

Activity: 60

Merit: 0

So, I've read that Claymore coded some cards to use -i 7 instead of -8, which is no big deal. Glad I read it, cause knowing if half the battle.

A restart was needed between version 12 and 12.1, and copied the exact same config over from 12 to 12.1

My R9 Fury X's (stock bio's and all modifications is done in claymore config) are now pulling +500 sol's , which is what my other rig, with Nvidia 1080 cards are pulling

So, take a bow Sir! Bravo Sir...Bravo

rpg

hero member

Activity: 728

Merit: 500

Quote from: rpg on February 20, 2017, 02:07:57 PM

rx480 started at 325 and has been dropping since. Now at 280. temp and fan are normal ar 64C.

EDIT: Reverting to 12.0, there's a bug somewhere on the RX480 code. 7950 and 290x seem to be running stable although the 290x is also loosing steam (started at 380 now at 348). The rx480 is now at 275 lol

EDIT 2: now even on 12.0 is running in the 270s.

Edit 3: had to reboot and clear any lingering power for the rx480 to come back to its normal hashing

crazyq

newbie

Activity: 12

Merit: 0

I've got problem with my rig using 12.1 ver
On ver 12 i've got i8 and everything work smooth.
On ver 12.1 intens change from 8 to 7 automatically and rig god errors and stop mining between 3-4 sec sessions.
Anyone can tell me what's wrong with this?
Ubuntu 16.04
5 R9 Fury Air
MSI Z97 Gaming 5

economist2000

member

Activity: 146

Merit: 10

Quote from: cracker666 on February 20, 2017, 02:43:37 PM

Quote from: economist2000 on February 20, 2017, 01:01:13 PM

Super version!
290X 12.0=346-350 sol, 12.1 = 136-186 sol! Sad

7 x64, 16.9.1

i had to reduce intensity to 6 to get mine going

Thank you! But in this case 290X speed remained at 12.0: 345-347 sol.

cracker666

member

Activity: 79

Merit: 10

Quote from: economist2000 on February 20, 2017, 01:01:13 PM

Super version!
290X 12.0=346-350 sol, 12.1 = 136-186 sol! Sad

7 x64, 16.9.1

i had to reduce intensity to 6 to get mine going

rpg

hero member

Activity: 728

Merit: 500

rx480 started at 325 and has been dropping since. Now at 280. temp and fan are normal ar 64C.

EDIT: Reverting to 12.0, there's a bug somewhere on the RX480 code. 7950 and 290x seem to be running stable although the 290x is also loosing steam (started at 380 now at 348). The rx480 is now at 275 lol

EDIT 2: now even on 12.0 is running in the 270s.

sezyumx

hero member

Activity: 686

Merit: 500

Sandblock - Customer satisfaction on blockchain

Tnx claymore. Stable for 4 hours.

gb84

newbie

Activity: 23

Merit: 0

Instead of ab use wattman and everything will work just fine. (win10)

RentGPU

sr. member

Activity: 661

Merit: 258

Nice, the 12.1 fixed the invalid shares issue for me....thx,and more hashrate as bouns

economist2000

member

Activity: 146

Merit: 10

Super version!
290X 12.0=346-350 sol, 12.1 = 136-186 sol! Sad

7 x64, 16.9.1

wolverinex1282

member

Activity: 115

Merit: 10

Quote from: Assaro on February 20, 2017, 12:24:50 PM

Hi guys.

Getting from time to time the "returned incorrect data!" message. Any idea about the problem asociation with it? Should I ignore it or will it crash after while?

Already reduced the i- from 8 to 7, same problem....

returned incorrect data!99400afb
returned incorrect data!8000d716

ty for any advice...

just use intensity 4 or 5 .. i use intensity 2 only cause my driver always crash with 4 and above.. i got 4 280x around 285h/s per card

Assaro

member

Activity: 114

Merit: 10

Hi guys.

Getting from time to time the "returned incorrect data!" message. Any idea about the problem asociation with it? Should I ignore it or will it crash after while?

Already reduced the i- from 8 to 7, same problem....

returned incorrect data!99400afb
returned incorrect data!8000d716

ty for any advice...

gametech0101

newbie

Activity: 10

Merit: 0

My setting:

Rig 1;
MOBO1 : Gigabyte z97 Gaming 7 LGA 1150
CPU: Intel Celeron G3250 LGA 1150
RAM: 4GB (2600 MHz)
Windows 10

with -i 8
GPU's
3 x MSI AMD R9 390 8GB, 1081/1500 (speed with CM V12.1 = 390 H/s)
2 x XFX AMD R9 390X 8GB, 1112/1500 (speed with CM V12.1 = 410 H/s)
1 x ASUS AMD R9 390 8GB, 1091/1500 (speed with CM V12.1 = 395 H/s)

Rig 2:
MOBO: MSI Z97 Gaming 5 LGA 1150
CPU: Intel Celeron G1840 LGA 1150
RAM: 4GB (2600 MHz)
Windows 10

With -i 8
GPU's
1 x MSI AMD R9 390 8GB, 1081/1500 (speed with CM V12.1 = 380 H/s)
1 x Gigabyte AMD Gaming G1 R9 390 8GB, 1065/1500 (speed with CM V12.1 = 388 H/s)
2 x XFX AMD Rx 480 Rs 4GB, 1400/1720 (speed with CM V12.1 = 290 H/s)

All running very well

batko

full member

Activity: 169

Merit: 100

my R9 380 Nitro have Elpida memory and about 700Hs

ginmac

newbie

Activity: 43

Merit: 0

Quote from: batko on February 20, 2017, 11:13:20 AM

Quote from: ginmac on February 20, 2017, 10:11:09 AM

Quote from: Claymore on February 20, 2017, 09:32:18 AM

Quote from: stealth2600 on February 20, 2017, 09:24:21 AM

Quote from: Claymore on February 20, 2017, 08:00:29 AM

v12.1:

- slightly improved speed for some cards, about 410H/s on stock 390X, 450H/s on stock Nano, 290H/s on stock 280X, 300H/s on stock RX480.
- slightly improved stability. If it is still unstable for you, reduce "-i" value.
- fixed issue with wrong hashrate when "-li" or "-ttli" options enabled.

Did you make any improvements for Tonga cards in this release?

Yes but not much, I see 193->200H/s on my stock 380. I don't plan any further good speedup for Tonga, these cards are really weak for zcash.

Yes, Tonga (1000/1500Mhz) 200-230H/s. Cryptonight is better, 560H/s with new sgminer-nicehash (Claymore-550H/s + 2.5% fee).

I have 700hs with R9 380 moded bios Wink

with clymore v12.1 about 250sol same card same bios.

Yes, in Cryptonight from 560H/s to 650H/s on stock R380´s (no moded).

batko

full member

Activity: 169

Merit: 100

Quote from: ginmac on February 20, 2017, 10:11:09 AM

Quote from: Claymore on February 20, 2017, 09:32:18 AM

Quote from: stealth2600 on February 20, 2017, 09:24:21 AM

Quote from: Claymore on February 20, 2017, 08:00:29 AM

v12.1:

- slightly improved speed for some cards, about 410H/s on stock 390X, 450H/s on stock Nano, 290H/s on stock 280X, 300H/s on stock RX480.
- slightly improved stability. If it is still unstable for you, reduce "-i" value.
- fixed issue with wrong hashrate when "-li" or "-ttli" options enabled.

Did you make any improvements for Tonga cards in this release?

Yes but not much, I see 193->200H/s on my stock 380. I don't plan any further good speedup for Tonga, these cards are really weak for zcash.

Yes, Tonga (1000/1500Mhz) 200-230H/s. Cryptonight is better, 560H/s with new sgminer-nicehash (Claymore-550H/s + 2.5% fee).

I have 700hs with R9 380 moded bios Wink

with clymore v12.1 about 250sol same card same bios.

marvykkio

hero member

Activity: 798

Merit: 1000

but increase for rx 470 and 480 I have not seen in version 12, and even in version 12.1

dumpida

hero member

Activity: 722

Merit: 500

The speed increase for the 12.1 over 12.0 is about 3% for R9 390. The power consumption is also 3% increase.

ginmac

newbie

Activity: 43

Merit: 0

Quote from: Claymore on February 20, 2017, 09:32:18 AM

Quote from: stealth2600 on February 20, 2017, 09:24:21 AM

Quote from: Claymore on February 20, 2017, 08:00:29 AM

v12.1:

- slightly improved speed for some cards, about 410H/s on stock 390X, 450H/s on stock Nano, 290H/s on stock 280X, 300H/s on stock RX480.
- slightly improved stability. If it is still unstable for you, reduce "-i" value.
- fixed issue with wrong hashrate when "-li" or "-ttli" options enabled.

Did you make any improvements for Tonga cards in this release?

Yes but not much, I see 193->200H/s on my stock 380. I don't plan any further good speedup for Tonga, these cards are really weak for zcash.

Yes, Tonga (1000/1500Mhz) 200-230H/s. Cryptonight is better, 560H/s with new sgminer-nicehash (Claymore-550H/s + 2.5% fee).

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 148. (Read 3839201 times)