Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 222. (Read 3839398 times)
there r no extra cores to unlock on 290x/390x
has anyone tried to unlock the 8 computing units that are rumored to be on the 290x?
Claymore, why do you ignoring the Fiji driver issue in v.11? Do you have a plan to fix this ?
I'm already fixing it. And upcoming update will also improve speed.
Thank you for the answer. I didn't know about that. Asked you in thread 3-4 times about that.
don't confuse people.
I've got here 6 rx400 on 1KW doing just fine (the most intensive dual eth&sc takes up to 920W from the wall, ZEC is about 750W)
EDIT: undervolted to the very bottom ('bout 850mv), lowered core, 2K mem, bios mod
Actually if the miner to lunch without your under volt software you will get 1100+W watt from the wall .
I did a test run with 6 rx 470 4Gb Nitro flashed with modded bios , Core 1130 Mhz , memory 1900 Mhz with 1500 strap .
It had 1150+W at the wall using Evga 1300 G2 Gold .
Once the Wattool kicks in and it is down to 900W
You need to make sure that voltage adjustment software kick in before miner or set Bios offset
Before Wattool
After Wattol
Some Crap PSUs will be rated at 1KW and will shutdown before reaching 1KW at the wall , others have multi rail with power distribution
I have 2 Rx480 and 1 Rx470
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
I have to undervotlage my 4xRX480 4GB to run from a 1000W PSU. Really can't see how 750W would have a chance.
don't confuse people.
I've got here 6 rx400 on 1KW doing just fine (the most intensive dual eth&sc takes up to 920W from the wall, ZEC is about 750W)
EDIT: undervolted to the very bottom ('bout 850mv), lowered core, 2K mem, bios mod
The problem can easily be related to the pcie lanes/resources availability, play with bios: disable devices, set lower generation for the slots, disable power savings, etc... Drivers setup in win can be an issue as well.
Claymore, why do you ignoring the Fiji driver issue in v.11? Do you have a plan to fix this ?
I'm already fixing it. And upcoming update will also improve speed.
Claymore, the speed for the Polaris RX cards is currently embarrassing compared to anything else from AMD or Nvidia.
When will it be possible to fix the speed on those cards?
Tried diffrent drivers on my R9 Nano. No "asm" so no speed update... Funny that 290 and 7950 work just great
As mentioned above, use 16.3.2 with fijis.
I got 9 x R9 Fury something like 330-370 H/s (-45% power limit)
With -asm 0 -a 2 parameters.
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd
400@-96mv with 16.3.2 lots of nanos, pro duos...
I can confirm that the Pro Duo's work with the 16.3.2 driver and 11v asm 0.
I am running it at +7.1% and I am getting 420-425 Sol/s per GPU.
You should get almost twice that with a pro duo? People are seeing them figures on a nano.... anyway what did you use to undervolt the pro duo?
per GPU
I did not Undervoltage as I don't pay for power on my workstation :-) But I can only mine 16h out of 24h :-(
Claymore, why do you ignoring the Fiji driver issue in v.11? Do you have a plan to fix this ?
When do you plan release?
I'm already fixing it. And upcoming update will also improve speed.
Claymore, why do you ignoring the Fiji driver issue in v.11? Do you have a plan to fix this ?
I'm already fixing it. And upcoming update will also improve speed.
Im mining at coinotron, and im getting the best result so far
Hey man don't let the cat out of the bag I have 2 Rx480 and 1 Rx470
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
I have to undervotlage my 4xRX480 4GB to run from a 1000W PSU. Really can't see how 750W would have a chance.
lol I run 8x RX470s from a 850 watt PSU
now with what i posted above u can run many psu's in a system no limit to that just jumper the power good signal(green wire) to ground(black wire) on the atx connector to turn psu on they also make ready made adapters that allow u to daisy chain multiple psus so they all turn on together when u hit power on pc
4 cards is to much for 750w psu A psu wattage is total of 3.3v 5v and 12v just because it says 750w doesnt mean u get 750w at 12v
and im sure its spit rails so u get even less amps through each pci-e connector. so really u have less than 750w cause some of that is used for 3.3v and 5v amps and the psu itself could be cheap garabage or lie about what it can do.
also they have circuit protections to so if u do get it up running soon as u started mining it would shut off
and im sure its spit rails so u get even less amps through each pci-e connector. so really u have less than 750w cause some of that is used for 3.3v and 5v amps and the psu itself could be cheap garabage or lie about what it can do.
also they have circuit protections to so if u do get it up running soon as u started mining it would shut off
I have 2 Rx480 and 1 Rx470
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
I have to undervotlage my 4xRX480 4GB to run from a 1000W PSU. Really can't see how 750W would have a chance.
lol I run 8x RX470s from a 850 watt PSU
Why do not you tell people how much you reduce the clock speed graphics cards?
Claymore, why do you ignoring the Fiji driver issue in v.11? Do you have a plan to fix this ?
I have 2 Rx480 and 1 Rx470
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
I have to undervotlage my 4xRX480 4GB to run from a 1000W PSU. Really can't see how 750W would have a chance.
lol I run 8x RX470s from a 850 watt PSU
Soo, there will be a new version this weekend?
I have 2 Rx480 and 1 Rx470
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
Working perfect with one card directly plugged into pcie x16 and 2 usb powered risers
Now I bought another Rx480 with usb riser
So my problem is with 4 cards plugged into Mother board PC (Win 10) does not boot...
Fans are spinning on all 4 cards
Anybody know why??
Maybe its because of PSU?
Its 750 Watt
I have to undervotlage my 4xRX480 4GB to run from a 1000W PSU. Really can't see how 750W would have a chance.
try to plug hdmi in differents ones ?
Im underclocking and undervolting so I wont have more than 550 Watts at the Wall with 4 cards.
But maybe PSU checks before booting and says 4 cards are too much? Is that possible?
Im mining at coinotron, and im getting the best result so far
I think you can try 400H/s from single graphic card.
No doubts it's possible. Question is how do you like more energy consumption? If you can caary on, let's give a sign you made it.
No doubts it's possible. Question is how do you like more energy consumption? If you can caary on, let's give a sign you made it.
Any suggestions for 400h/s? What do do to get this numbers?
Jump to: