Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 217.

kev7112001

sr. member

Activity: 479

Merit: 250

Quote from: invoke on January 16, 2017, 02:20:52 PM

Quote from: jenci on January 16, 2017, 01:59:01 PM

Quote from: invoke on January 16, 2017, 01:54:04 PM

yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

I will retry that, but in the configuration, I had -i 2 and still having a halt.

i just said why above the older ver dont work the gpu hard enough u need to either adjust clocks or volts if they are stock then u should start fresh and use DDU to uninstall drivers then install 15.12 or higher then retry

also after ever driver change u should always uninstall afterburner then reinstall after and reboot it can lead to instability if u dont

invoke

newbie

Activity: 3

Merit: 0

Quote from: jenci on January 16, 2017, 01:59:01 PM

Quote from: invoke on January 16, 2017, 01:54:04 PM

yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

I will retry that, but in the configuration, I had -i 2 and still having a halt.

kev7112001

sr. member

Activity: 479

Merit: 250

see using asm is using bare metal on the gpu so what ever clocks u used in the ones before wont be stable i had a 7970 at 1230 clocks on v10 doing 265sols i had to reduce that by 70 mhz to be stable on v11 doing 290sols

kev7112001

sr. member

Activity: 479

Merit: 250

Quote from: jenci on January 16, 2017, 01:59:01 PM

Quote from: invoke on January 16, 2017, 01:54:04 PM

yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

-i 4?
u should never need that low -i 7 should be low enough 4 that if it isnt stable then its your card clocks or not enough voltage

jenci

newbie

Activity: 17

Merit: 0

Quote from: invoke on January 16, 2017, 01:54:04 PM

yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

invoke

newbie

Activity: 3

Merit: 0

Quote from: jenci on January 16, 2017, 12:25:54 PM

Quote from: invoke on January 16, 2017, 12:11:03 PM

Is anyone experiencing complete system halt (windows 10) due to the watchdog??

I have been having troubles with the miner since v9.3. I have a system of 5 RX480 8GB cards and every time I run the miner, after about 5-10 min, the terminal shows "Thread hanging, about to restart" but instead, the whole system freezes.

Any suggestions on how to solve this issue??

I have:
- Updated/Downgraded drivers, currently v16.11.3 as suggested at initialization.
- Enabled/Disabled options: asm, intensity, algorithm, watchdog.

all stock?if no, try reset overclock. i have same problem when overdecrease core voltage

yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

Code:

GPU0 t=89C fan=41%, GPU1 t=88C fan=42%, GPU2 t=74C fan=44%, GPU3 t=73C fan=35%, GPU4 t=73C fan=38%
ZEC: 01/16/17-13:45:43 - SHARE FOUND - (GPU 4)
ZEC: Share accepted (297 ms)!
ZEC: 01/16/17-13:45:46 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (297 ms)!
ZEC: 01/16/17-13:45:58 - SHARE FOUND - (GPU 4)
GPU0 t=89C fan=42%, GPU1 t=89C fan=41%, GPU2 t=74C fan=44%, GPU3 t=73C fan=35%, GPU4 t=73C fan=39%

Miner thread hangs, need to restart miner!
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #2: Ellesmere, 8192 MB available, 36 compute units
GPU #3: Ellesmere, 8192 MB available, 36 compute units
GPU #4: Ellesmere, 8192 MB available, 36 compute units
ZEC - Total Speed: 419.651 H/s, Total Shares: 59, Rejected: 0, Time: 00:08
ZEC: GPU0 0.000 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s, GPU3 212.510 H/s, GPU4 207.141 H/s
Pool switches: ZEC - 0
Current ZEC pool share target: 0x000ffffe (diff: 4096H)
ZEC: 01/16/17-13:50:21 - New job from zec-us1.dwarfpool.com:3335
ZEC - Total Speed: 419.651 H/s, Total Shares: 59, Rejected: 0, Time: 00:08
ZEC: GPU0 0.000 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s, GPU3 212.510 H/s, GPU4 207.141 H/s
GPU0 t=51C fan=18%, GPU1 t=56C fan=18%, GPU2 t=56C fan=0%, GPU3 t=58C fan=0%, GPU4 t=60C fan=28%

Restarting OK, exit...



╔════════════════════════════════════════════════════════════════╗
║            Claymore's ZCash AMD GPU Miner v9.1 Beta            ║
╚════════════════════════════════════════════════════════════════╝

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: KL0nLutiy on January 16, 2017, 12:40:20 PM

Will new miner available today?

Maybe.

KL0nLutiy

member

Activity: 158

Merit: 10

Will new miner available today?

jenci

newbie

Activity: 17

Merit: 0

Quote from: invoke on January 16, 2017, 12:11:03 PM

Is anyone experiencing complete system halt (windows 10) due to the watchdog??

I have been having troubles with the miner since v9.3. I have a system of 5 RX480 8GB cards and every time I run the miner, after about 5-10 min, the terminal shows "Thread hanging, about to restart" but instead, the whole system freezes.

Any suggestions on how to solve this issue??

I have:
- Updated/Downgraded drivers, currently v16.11.3 as suggested at initialization.
- Enabled/Disabled options: asm, intensity, algorithm, watchdog.

all stock?if no, try reset overclock. i have same problem when overdecrease core voltage

invoke

newbie

Activity: 3

Merit: 0

Is anyone experiencing complete system halt (windows 10) due to the watchdog??

I have been having troubles with the miner since v9.2. I have a system of 5 RX480 8GB cards and every time I run the miner, after about 5-10 min, the terminal shows "Thread hanging, about to restart" but instead, the whole system freezes.

Any suggestions on how to solve this issue??

I have:
- Updated/Downgraded drivers, currently v16.11.3 as suggested at initialization.
- Enabled/Disabled options: asm, intensity, algorithm, watchdog.

batko

full member

Activity: 169

Merit: 100

Claymore new miner today?
Kernel for tonga and polaris?

roony

full member

Activity: 196

Merit: 100

Did you see the roonies on him???

Quote from: Astennu on January 16, 2017, 11:45:24 AM

Quote from: roony on January 16, 2017, 10:19:26 AM

Soo, better speeds for polaris and 390x on today's release?

Maybe maybe not. I thought Hawaii 290(X) and 390(X) already had ASM support.
380 and 285 (Tonga) did not. Same with Polaris. So who knows wat magic Claymore can do.

Maybe we will have to wait a while for ASM + Polaris.

Hope don't take too long Wink

Astennu

newbie

Activity: 13

Merit: 0

Quote from: roony on January 16, 2017, 10:19:26 AM

Soo, better speeds for polaris and 390x on today's release?

Maybe maybe not. I thought Hawaii 290(X) and 390(X) already had ASM support.
380 and 285 (Tonga) did not. Same with Polaris. So who knows wat magic Claymore can do.

Maybe we will have to wait a while for ASM + Polaris.

IOTUSA

sr. member

Activity: 504

Merit: 250

Quote from: sorry2xs on January 16, 2017, 11:24:21 AM

Quote from: IOTUSA on January 16, 2017, 11:23:16 AM

Quote from: ccccccc7 on January 13, 2017, 10:22:12 AM

Quote from: batut on January 13, 2017, 09:29:29 AM

hi. how much sol with a r9 390?

310-330 sol/s

I have issues with 390's on 11 myself. 10 works well though

390's do better for me on 9.3 go figure

Is it worth undervolting 290/390 series cards? They are beasts but they do draw power like nobody's business. Also, what driver do you use with 390s? 15.12 or later?

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: IOTUSA on January 16, 2017, 11:23:16 AM

Quote from: ccccccc7 on January 13, 2017, 10:22:12 AM

Quote from: batut on January 13, 2017, 09:29:29 AM

hi. how much sol with a r9 390?

310-330 sol/s

I have issues with 390's on 11 myself. 10 works well though

390's do better for me on 9.3 go figure

IOTUSA

sr. member

Activity: 504

Merit: 250

Quote from: ccccccc7 on January 13, 2017, 10:22:12 AM

Quote from: batut on January 13, 2017, 09:29:29 AM

hi. how much sol with a r9 390?

310-330 sol/s

I have issues with 390's on 11 myself. 10 works well though

Lucky - Luciano

hero member

Activity: 711

Merit: 500

Quote from: abz1 on January 15, 2017, 05:42:55 PM

Zcash v 11 is doing quite good.

Undervolted 4 x cards I get 1046 H/s and 360 watts at the wall.

It already looks unreal. That is, on average, 261.5 Sol / s. This can be achieved at high GPU tact, but with a very high consumption of electricity.System without graphics cards can consume from 100 - 200 W (my platform with socket 2011 consumes than 200 watts without graphics cards).And your configuration (without graphics card) consumes a safe 100 W. Are you saying that your graphics card consumes at 62.5 W per pieces and maybe even less? If you thought that today is April 1 - you're wrong Grin

. Maybe it's still possible with R9 Nano (I do not have them so do not know), but I am writing about my SAPPHIRE RX480 NITRO OC + 8 Gb.

Qazo

full member

Activity: 211

Merit: 101

I need advice, I can get used Sapphire Vapor-x R9 280x 3gb for 100 €

go or no go?

restless

legendary

Activity: 1151

Merit: 1001

Revently I had a case where a 290 lost reading/controlling of the fan
It reached -tstop (85) and stopped mining

Any idea how to catch such issue?
Will -r 1 + reboot.bat (to reboot Windows) help to solve it?

roony

full member

Activity: 196

Merit: 100

Did you see the roonies on him???

Soo, better speeds for polaris and 390x on today's release?

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 217. (Read 3839201 times)