Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 324.

shadabahmed

hero member

Activity: 616

Merit: 500

Quote from: BitJunkie556 on December 16, 2016, 02:20:36 PM

Quote from: shadabahmed on December 16, 2016, 01:51:31 PM

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC

5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+ 950 watt
5X RX470 ETC+DCR stock 1216/1750 805 watt
5X RX470 ZEC 885 WATT
5X RX470 XMR 760 WATT

is that possible lower the power consumption?

What's your hashrate with those rigs?

I just feel like there's no way they can be burning that much power... Although I guess the last rig seems about right.

The only way to reduce power would really be to undervolt etc... Thing is, for those kind of clock speeds on the first rig, there's no way you'll be able to undervolt much, if at all... Either lower your clock speeds and undervolt, or just deal with it, it seems like.

Try lowering core to 1000-1050, and lower your power limit. You'll have to play with it to see what is able to run stable. Maybe even try lowering core to 1000, and crank up your memory clock a bit more. May make your hashrate better for similar (or less) wattage. Like I said, ultimately you'll just have to put some time into "guess and check" here.

bro how to undervolt? i mean which options i have to change

i am using this setting at stock bios card

core voltage = +0
power limit = +0
temp. limit = 90
core clock = 1216
memory clock = 1750
fan speed 65

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: densets on December 16, 2016, 12:14:29 PM

Quote from: anticlimax on December 16, 2016, 08:49:52 AM

Quote from: naeme18720 on December 16, 2016, 08:43:48 AM

Hi to all

why my share found very very hight 327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

My god, those poor fans.

my fans are at 100% does that make me a murderer?

There isn't really much benefit to running cards below ~65-70. So it is not worth spinning fans really high to get temps in 50s. For Eth or Zec with undervolt, 30-50% fan should be fine. You may get slightly higher extreme clocks with lower temp, but not worth killing the fans.

BitJunkie556

full member

Activity: 258

Merit: 100

Quote from: shadabahmed on December 16, 2016, 01:51:31 PM

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC

5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+ 950 watt
5X RX470 ETC+DCR stock 1216/1750 805 watt
5X RX470 ZEC 885 WATT
5X RX470 XMR 760 WATT

is that possible lower the power consumption?

What's your hashrate with those rigs?

I just feel like there's no way they can be burning that much power... Although I guess the last rig seems about right.

The only way to reduce power would really be to undervolt etc... Thing is, for those kind of clock speeds on the first rig, there's no way you'll be able to undervolt much, if at all... Either lower your clock speeds and undervolt, or just deal with it, it seems like.

Try lowering core to 1000-1050, and lower your power limit. You'll have to play with it to see what is able to run stable. Maybe even try lowering core to 1000, and crank up your memory clock a bit more. May make your hashrate better for similar (or less) wattage. Like I said, ultimately you'll just have to put some time into "guess and check" here.

shadabahmed

hero member

Activity: 616

Merit: 500

here are the wattage usage i checked with energy meter
http://www.ebay.com/itm/New-TS-1500-Plug-in-Electricity-Meter-Electronic-Energy-Meter-LCD-Energy-Monitor-/121962476226

card is rx470 4g OC

5X RX470 ETC+DCR modded bios 1100/1900 powerlimit 25+ 950 watt
5X RX470 ETC+DCR stock 1216/1750 805 watt
5X RX470 ZEC 885 WATT
5X RX470 XMR 760 WATT

is that possible lower the power consumption?

dygus

legendary

Activity: 1193

Merit: 1000

Peaky Blinder

Quote from: Fidemoga on December 16, 2016, 12:32:05 PM

Quote from: dygus on December 16, 2016, 12:30:54 PM

One of my GPUs shows "returned incorrect data" it's shappire 290x 8gb RAM 2 others 290x with 4gbs are ok. Anyone knows why?

You need to reduce the frequency or reduce the intensity. The clock or the intensity is too high, so it returns bad data.

Thank you for quick response

Fidemoga

sr. member

Activity: 302

Merit: 250

Quote from: dygus on December 16, 2016, 12:30:54 PM

One of my GPUs shows "returned incorrect data" it's shappire 290x 8gb RAM 2 others 290x with 4gbs are ok. Anyone knows why?

You need to reduce the frequency or reduce the intensity. The clock or the intensity is too high, so it returns bad data.

dygus

legendary

Activity: 1193

Merit: 1000

Peaky Blinder

One of my GPUs shows "returned incorrect data" it's shappire 290x 8gb RAM 2 others 290x with 4gbs are ok. Anyone knows why?

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: densets on December 16, 2016, 12:14:29 PM

Quote from: anticlimax on December 16, 2016, 08:49:52 AM

Quote from: naeme18720 on December 16, 2016, 08:43:48 AM

Hi to all

why my share found very very hight 327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

My god, those poor fans.

my fans are at 100% does that make me a murderer?

my fans 50 - 70% but in claymore 80 -87% showed

densets

newbie

Activity: 36

Merit: 0

Quote from: anticlimax on December 16, 2016, 08:49:52 AM

Quote from: naeme18720 on December 16, 2016, 08:43:48 AM

Hi to all

why my share found very very hight 327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

http://uupload.ir/files/0ek_5875untitled.jpg

My god, those poor fans.

my fans are at 100% does that make me a murderer?

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: kuna95 on December 16, 2016, 12:05:15 PM

in dwarfpool
if you have
cpu use port 3334
1 gpu use port 3335
2-4 gpu use port 3336
5+ gpu use port 3337

change config .bat
i have serveur eu 72-180 ms

I change server that 3333 to 3336 for 4 gpu but not change share found 358--257-390-400 ms

This miner is for me

https://dwarfpool.com/zec/address?wallet=t1YdKS8sstWxxdNs8Vz5TMtEAogSfAaXg4s

In now i used that server zec-eu1.dwarfpool.com:3336 ..my share foun change to 240-280-230 ms...thanks my friend...this better that 300 -400 ms

kuna95

newbie

Activity: 5

Merit: 0

in dwarfpool
if you have
cpu use port 3334
1 gpu use port 3335
2-4 gpu use port 3336
5+ gpu use port 3337

change config .bat
i have serveur eu 48-180 ms reguly 78ms

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: ghostfaceuk on December 16, 2016, 11:15:40 AM

Quote from: naeme18720 on December 16, 2016, 11:01:39 AM

Quote from: ghostfaceuk on December 16, 2016, 10:47:13 AM

Quote from: naeme18720 on December 16, 2016, 10:42:34 AM

please help me...my share found 300 ms ..whay??? how i fixed this share found???

are you using the pool closest to your location? using a pool in a different location can increase the time it takes for a share to be accepted

ok ..I lived in iran...what server for me is beter in drawfpool???

they have 4 servers for ZEC. one in europe zec-eu1 (france), one in china zec-cn1 (shanghai), one in russia zec-ru1 (moscow)and one in the us zec-us1 (seattle).

Choose the server closest to you and you should see the 300ms time drop

this best server for me is russia zec-ru1 ...359-220 ms ...this mean for me that lived in iran the best or no.. Huh

But before this share found was 170 ms but now is 300ms...this problem that riser usb3 ..not ..i dont know

ghostfaceuk

sr. member

Activity: 410

Merit: 250

Quote from: naeme18720 on December 16, 2016, 11:01:39 AM

Quote from: ghostfaceuk on December 16, 2016, 10:47:13 AM

Quote from: naeme18720 on December 16, 2016, 10:42:34 AM

please help me...my share found 300 ms ..whay??? how i fixed this share found???

are you using the pool closest to your location? using a pool in a different location can increase the time it takes for a share to be accepted

ok ..I lived in iran...what server for me is beter in drawfpool???

they have 4 servers for ZEC. one in europe zec-eu1 (france), one in china zec-cn1 (shanghai), one in russia zec-ru1 (moscow)and one in the us zec-us1 (seattle).

Choose the server closest to you and you should see the 300ms time drop

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: ilia_vs on December 16, 2016, 10:53:08 AM

Quote from: ivomm on December 16, 2016, 09:18:02 AM

Quote from: naeme18720 on December 16, 2016, 08:43:48 AM

Hi to all

why my share found very very hight 327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

Кo peчe, кo?

Бa и aз нe гo вдяaaм кo викa

thanks my friend...low low fixed this problem

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: ghostfaceuk on December 16, 2016, 10:47:13 AM

Quote from: naeme18720 on December 16, 2016, 10:42:34 AM

please help me...my share found 300 ms ..whay??? how i fixed this share found???

are you using the pool closest to your location? using a pool in a different location can increase the time it takes for a share to be accepted

ok ..I lived in iran...what server for me is beter in drawfpool???

ilia_vs

newbie

Activity: 24

Merit: 0

Quote from: ivomm on December 16, 2016, 09:18:02 AM

Quote from: naeme18720 on December 16, 2016, 08:43:48 AM

Hi to all

why my share found very very hight 327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

Кo peчe, кo?

Бa и aз нe гo вдяaaм кo викa

ghostfaceuk

sr. member

Activity: 410

Merit: 250

Quote from: naeme18720 on December 16, 2016, 10:42:34 AM

please help me...my share found 300 ms ..whay??? how i fixed this share found???

are you using the pool closest to your location? using a pool in a different location can increase the time it takes for a share to be accepted

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: GTCG on December 16, 2016, 10:30:31 AM

I'm running Claymore version 9.1. Everything is running stable:

Code:

ZEC: 12/16/16-13:43:21 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 374.633 H/s, Total Shares: 12364, Rejected: 61, Time: 18:59
ZEC: GPU0 201.921 H/s, GPU1 172.712 H/s
GPU0 t=68C fan=87%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:43:28 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:30 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:43:34 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:39 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:43:42 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (32 ms)!
GPU0 t=68C fan=87%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:43:57 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:59 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:01 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
GPU0 t=68C fan=87%, GPU1 t=53C fan=16%
ZEC: 12/16/16-13:44:26 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:32 - SHARE FOUND - (GPU 0)
ZEC: 12/16/16-13:44:33 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (202 ms)!
ZEC: Share accepted (218 ms)!
ZEC: 12/16/16-13:44:36 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (156 ms)!
ZEC: 12/16/16-13:44:37 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:38 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (437 ms)!
ZEC: 12/16/16-13:44:39 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:49 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:50 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:52 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (46 ms)!
GPU0 t=68C fan=82%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:44:55 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (374 ms)!
ZEC: 12/16/16-13:44:56 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:45:02 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 375.053 H/s, Total Shares: 12386, Rejected: 61, Time: 19:01
ZEC: GPU0 201.920 H/s, GPU1 173.142 H/s

This line concerns me:
GPU0 t=68C fan=82%, GPU1 t=52C fan=16%
I have 2 GPU's running: 2x HD 7950

GPU1 seems to be acting lazy. How comes that the fan is only at 16% and t = 52C? It seems to me like the card is not performing as it should. Is this behavior normal?

There does not seem to be any ouput about the amount of sols. Is there a way I can calculate this looking at the amount of Hashes per second?

I'm concerned about the fanspeed of GPU 0 as well, it's about 87%. What is the normal fan speed while mining?

please help me...my share found 300 ms ..whay??? how i fixed this share found???

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: anticlimax on December 16, 2016, 08:49:52 AM

Quote from: naeme18720 on December 16, 2016, 08:43:48 AM

Hi to all

why my share found very very hight 327ms-1200ms--120ms--its Different why???

My memoory rom 4GB---and--cpu g3240 3.1Ghz..motherboard b85 asus

im tested all connection in pool drawfpool...but not fixed...what are you doing ...this see picture

in realy this problem in flypool i have......my problem where???

My god, those poor fans.

what??? how are you??

what are i doing??

ghostfaceuk

sr. member

Activity: 410

Merit: 250

Quote from: GTCG on December 16, 2016, 10:30:31 AM

I'm running Claymore version 9.1. Everything is running stable:

Code:

ZEC: 12/16/16-13:43:21 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 374.633 H/s, Total Shares: 12364, Rejected: 61, Time: 18:59
ZEC: GPU0 201.921 H/s, GPU1 172.712 H/s
GPU0 t=68C fan=87%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:43:28 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:30 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:43:34 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:39 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:43:42 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (32 ms)!
GPU0 t=68C fan=87%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:43:57 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:59 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:01 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
GPU0 t=68C fan=87%, GPU1 t=53C fan=16%
ZEC: 12/16/16-13:44:26 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:32 - SHARE FOUND - (GPU 0)
ZEC: 12/16/16-13:44:33 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (202 ms)!
ZEC: Share accepted (218 ms)!
ZEC: 12/16/16-13:44:36 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (156 ms)!
ZEC: 12/16/16-13:44:37 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:38 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (437 ms)!
ZEC: 12/16/16-13:44:39 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:49 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:50 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:52 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (46 ms)!
GPU0 t=68C fan=82%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:44:55 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (374 ms)!
ZEC: 12/16/16-13:44:56 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:45:02 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 375.053 H/s, Total Shares: 12386, Rejected: 61, Time: 19:01
ZEC: GPU0 201.920 H/s, GPU1 173.142 H/s

This line concerns me:
GPU0 t=68C fan=82%, GPU1 t=52C fan=16%
I have 2 GPU's running: 2x HD 7950

GPU1 seems to be acting lazy. How comes that the fan is only at 16% and t = 52C? It seems to me like the card is not performing as it should. Is this behavior normal?

There does not seem to be any ouput about the amount of sols. Is there a way I can calculate this looking at the amount of Hashes per second?

I'm concerned about the fanspeed of GPU 0 as well, it's about 87%. What is the normal fan speed while mining?

GPU 1 is giving you 172 sol/s, whiich is lower than GPU 0's 201.

have you attempted any clocking with the cards? it may be worth checking with GPU-z or afterburner what clock/memory settings the cards are using.

as for the fan usage have you set a -tt figure in the batch file? the lower you set the temperature the harder the fans have to work

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 324. (Read 3839210 times)