Still getting the problem where 1 of my rx480 cards hashes at over 400 sols with lots of rejected shares.
I've ran it on stock and modded still the same.
Card works fine in ETH.
Ran it on different rigs to test
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 369. (Read 3839163 times)
How to backup to Catalyst (Crimson) 15.12? I have 16.11.5. Overinstalling - no success.
Help please.
Help please.
I join this question
How do I get the Catalyst (Crimson) 15,12?
I'm sorry I'm a newbie.
Google is your friend. You have to uninstall the current drivers from safe mode
http://www.guru3d.com/files-details/amd-radeon-software-crimson-15-12-driver-download.html
v9.1:
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Thank you very much!
Ok, you miners can't read:
reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection
reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection
v9.1 devfee is 90sec
Yes. It is still 90S.
16:23:23:003 1e48 DevFee: start mining (90sec)
16:23:23:331 1d8c recv: 51
16:23:23:346 1d8c srv pck: 50
16:23:23:425 1d8c srv bs: 0
16:23:23:425 1d8c sent: 200
16:23:24:800 1d00 ZEC: put share nonce 4fe
16:23:24:815 1d00 DevFee: ZEC round found 1 shares
16:23:24:831 1e48 DevFee: ZEC: 12/09/16-16:23:24 - SHARE FOUND - (GPU 3)
16:23:24:847 1e48 send share: {"id": 4, "method": "mining.submit", "params": ["t1b9PsiekL4RbMoGzyLMFkMevbz7QfwepgP","3a5b09890847676b94dd","9cda4a58","fe0400000000000000000000000000000000000000000000000000","fd4005001a6e959e8f4b52
16:23:24:925 1e48 got 23 bytes
16:23:24:925 1e48 buf: {"id":4,"result":true}
16:23:24:940 1e48 parse packet: 22
16:23:24:940 1e48 DevFee: ZEC: Share accepted (94 ms)!
16:24:48:871 1e48 DevFee: ZEC: Share accepted (93 ms)!
16:24:48:886 1e48 new buf size: 0
16:24:53:475 212c recv: 51
16:24:53:491 1e48 DevFee: stop mining and disconnect
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
what is the use of this ?
what is the use of this ?
How to backup to Catalyst (Crimson) 15.12? I have 16.11.5. Overinstalling - no success.
Help please.
Help please.
I join this question
How do I get the Catalyst (Crimson) 15,12?
I'm sorry I'm a newbie.
How to backup to Catalyst (Crimson) 15.12? I have 16.11.5. Overinstalling - no success.
Help please.
always use DDU to uninstall drivers Help please.
v9.1:
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Thank you for the improved miner.. thank you for the reduced fee.. God bless you my friend! :-)
How to backup to Catalyst (Crimson) 15.12? I have 16.11.5. Overinstalling - no success.
Help please.
Help please.
v9.1:
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Used -di detec now miner's not detecting one of my gpu's :/
v9.1 devfee is 90sec
dost dobre :-)
v9.1
ZecMiner64.exe -mport 0 -zpool ssl://asia1-zcash.flypool.org:3443 -zwal t1xxxx.worker -zpsw x -i 8 -dbg -1
ZEC: Stratum - connecting to 'asia1-zcash.flypool.org' <209.58.164.95> port 3443 (SSL/TLS)
Cannot establish SSL/TLS connection
ZEC: Stratum - Cannot connect to asia1-zcash.flypool.org:3443
ZEC: Stratum - Failed to connect, retry in 20 sec...
GPU0 t=30C fan=0%, GPU1 t=29C fan=0%, GPU2 t=22C fan=64%
Am I doing something wrong?
ZecMiner64.exe -mport 0 -zpool ssl://asia1-zcash.flypool.org:3443 -zwal t1xxxx.worker -zpsw x -i 8 -dbg -1
ZEC: Stratum - connecting to 'asia1-zcash.flypool.org' <209.58.164.95> port 3443 (SSL/TLS)
Cannot establish SSL/TLS connection
ZEC: Stratum - Cannot connect to asia1-zcash.flypool.org:3443
ZEC: Stratum - Failed to connect, retry in 20 sec...
GPU0 t=30C fan=0%, GPU1 t=29C fan=0%, GPU2 t=22C fan=64%
Am I doing something wrong?
v9.1:
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
sweet, esp these two items.
thanks.
v9.1:
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Since encryption is added I think its safe to release Linux version with ONLY ssl support, don't you agree?- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
No this isn't the reason why he doesn't want to release linux. Its because in Linux you can easily disassemble the program.
v9.1:
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Since encryption is added I think its safe to release Linux version with ONLY ssl support, don't you agree? - additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Hola, Soy de Venezuela.
Minando. Energia electrica barata (gratis) 0.001$ al mes para toda la casa.
Claymore's v8.0 r9 380 stock 129.9H/s
Claymore's v9.0 r9 380 stock 158.9H / s
volvi al v8.0.
El v9 inestable. cuelgue cada 12 horas o antes.
lo siento por mi mal ingles (google traductor)
___________________________________________________________________
Hi I'm from venezuela.
Mining. Cheap electric power (free) $ 0.001 per month for the whole house.
Claymore's v8.0 r9 380 stock 129.9H / s
Claymore's v9.0 r9 380 stock 158.9H / s
I returned to v8.0.
The v9 is unstable. Hang every 12 hours or before.
Sorry for my bad english (google translate)
Minando. Energia electrica barata (gratis) 0.001$ al mes para toda la casa.
Claymore's v8.0 r9 380 stock 129.9H/s
Claymore's v9.0 r9 380 stock 158.9H / s
volvi al v8.0.
El v9 inestable. cuelgue cada 12 horas o antes.
lo siento por mi mal ingles (google traductor)
___________________________________________________________________
Hi I'm from venezuela.
Mining. Cheap electric power (free) $ 0.001 per month for the whole house.
Claymore's v8.0 r9 380 stock 129.9H / s
Claymore's v9.0 r9 380 stock 158.9H / s
I returned to v8.0.
The v9 is unstable. Hang every 12 hours or before.
Sorry for my bad english (google translate)
try restarting the miner with the "-r" command (on the config.txt or the start.bat) like this -r 120 so the miner restarts itselfs every 2 hrs
intenta agregar el comando -r (ya sea en el config.txt o en el start.bat) asi -r 120 para que el programa se reinicie cada 2 horas
i got 4 rigs running v9 without issues
tengo 4 rigs corriendo v9 sin problemas
Thanks for your help.
Give me an example of how the command should be put in my start.bat.
I'm sorry but I'm new.
v9.1:
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
- additional range checks in code for better stability.
- reduced devfee, it's 2% now (72sec instead of 90sec) if you use secure SSL/TLS connection, currently Flypool and Suprnova pools support encrypted connections, see Readme for samples.
- improved "-di detect" option: now after GPU order detection miner starts mining with the detected order.
- added ability to use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment varibale and use it as "%WORKER%" in config.txt.
Hola, Soy de Venezuela.
Minando. Energia electrica barata (gratis) 0.001$ al mes para toda la casa.
Claymore's v8.0 r9 380 stock 129.9H/s
Claymore's v9.0 r9 380 stock 158.9H / s
volvi al v8.0.
El v9 inestable. cuelgue cada 12 horas o antes.
lo siento por mi mal ingles (google traductor)
___________________________________________________________________
Hi I'm from venezuela.
Mining. Cheap electric power (free) $ 0.001 per month for the whole house.
Claymore's v8.0 r9 380 stock 129.9H / s
Claymore's v9.0 r9 380 stock 158.9H / s
I returned to v8.0.
The v9 is unstable. Hang every 12 hours or before.
Sorry for my bad english (google translate)
Minando. Energia electrica barata (gratis) 0.001$ al mes para toda la casa.
Claymore's v8.0 r9 380 stock 129.9H/s
Claymore's v9.0 r9 380 stock 158.9H / s
volvi al v8.0.
El v9 inestable. cuelgue cada 12 horas o antes.
lo siento por mi mal ingles (google traductor)
___________________________________________________________________
Hi I'm from venezuela.
Mining. Cheap electric power (free) $ 0.001 per month for the whole house.
Claymore's v8.0 r9 380 stock 129.9H / s
Claymore's v9.0 r9 380 stock 158.9H / s
I returned to v8.0.
The v9 is unstable. Hang every 12 hours or before.
Sorry for my bad english (google translate)
try restarting the miner with the "-r" command (on the config.txt or the start.bat) like this -r 120 so the miner restarts itselfs every 2 hrs
intenta agregar el comando -r (ya sea en el config.txt o en el start.bat) asi -r 120 para que el programa se reinicie cada 2 horas
i got 4 rigs running v9 without issues
tengo 4 rigs corriendo v9 sin problemas
Jump to: