Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 375.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: auctioneeeeer on December 08, 2016, 06:07:49 PM

Quote from: a7med918 on December 08, 2016, 05:07:03 PM

Which is more profitable now ZEC or ETH.?

ETH has been more profitable for a while now

Depends on the rig and your electric cost.
You have to crunch YOUR OWN numbers - in my case, some of my cards are more profitable on ZEC most are more profitable on ETH the last week.

The lower end cards have to do ZEC 'cause they can't do ETH any more (my HD 7750s never could do ETH with 1 GB ram).

gaah

newbie

Activity: 56

Merit: 0

Quote from: peteycamey on December 08, 2016, 06:25:40 PM

Quote from: paintblack on December 08, 2016, 04:30:16 PM

after thorough analysis. here is my analitical and objective conclusion:

v8 rocks
v9 piece of shit.

funniest comment ever.

and soo true.

Why is that true?

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: rozsada on December 08, 2016, 06:55:20 PM

Quote from: Xardas2014 on December 08, 2016, 06:33:37 PM

Quote from: rozsada on December 08, 2016, 06:29:13 PM

I have 6x 480RX, mining ZEC is Ok. As soon as I start mining ETH or ETC - in some period of time it hangs. Why? (Then I need to restart the miner or the comp.)
Could you please help me?

More info required. What PSU are you using? What are your memclock, gpuclock, and voltage settings? What is your commandline?

EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal... -epsw x -mclock 2100 -gser 1 -ftime 10
I had before -mclock 2150. With 2100 - the same.
PSU - ? What is it? (sorry)

PSU=power supply unit. Reset all your clocks etc. back to default, get it working stable, then adjust. You didn't say if you are using a modded vbios which makes a difference and I forgot to ask. My first suspicion is your PSU isn't powerful enough. ETH algo uses more power than ZEC algo.

Just for starters you can add a few things to your commandline: (note: first I would try -r 0 which will just restart the miner. If you use -r 1 it will reboot the rig using the reboot.bat)

EthDcrMiner64.exe -wd 1 -r 0 -epool etc-eu1.nanopool.org:19999 -ewal... -epsw x

And add another .bat in the Claymore folder named something like reboot.bat if you set -r 1:

Code:

shutdown /r /t 5 /f

Altcoining

full member

Activity: 138

Merit: 100

Quote from: Ursul0 on December 08, 2016, 06:57:18 PM

v9 on rx400 +5% power consumption, +15% hashrate

I'm getting 6-9% diff max here on the RX 480's.
+25-35S/s.

Altcoining

full member

Activity: 138

Merit: 100

Quote from: shadabahmed on December 08, 2016, 05:12:59 PM

Quote from: Simon_Grape on December 08, 2016, 04:38:58 PM

All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.

what is "-i 8" ? n how to use it
i have 4 rx 470 and 1 280X

i am using this code
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

Change
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

to:

ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x -i 8
if for whatever reason you want -i 8.

Ursul0

sr. member

Activity: 857

Merit: 262

v9 on rx400 +5% power consumption, +15% hashrate

rozsada

member

Activity: 105

Merit: 10

Quote from: Xardas2014 on December 08, 2016, 06:33:37 PM

Quote from: rozsada on December 08, 2016, 06:29:13 PM

I have 6x 480RX, mining ZEC is Ok. As soon as I start mining ETH or ETC - in some period of time it hangs. Why? (Then I need to restart the miner or the comp.)
Could you please help me?

More info required. What PSU are you using? What are your memclock, gpuclock, and voltage settings? What is your commandline?

EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal... -epsw x -mclock 2100 -gser 1 -ftime 10
I had before -mclock 2150. With 2100 - the same.
PSU - ? What is it? (sorry)

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: rozsada on December 08, 2016, 06:29:13 PM

I have 6x 480RX, mining ZEC is Ok. As soon as I start mining ETH or ETC - in some period of time it hangs. Why? (Then I need to restart the miner or the comp.)
Could you please help me?

More info required. What PSU are you using? What are your memclock, gpuclock, and voltage settings? What is your commandline?

rozsada

member

Activity: 105

Merit: 10

I have 6x 480RX, mining ZEC is Ok. As soon as I start mining ETH or ETC - in some period of time it hangs. Why? (Then I need to restart the miner or the comp.)
Could you please help me?

peteycamey

legendary

Activity: 1184

Merit: 1017

Quote from: paintblack on December 08, 2016, 04:30:16 PM

after thorough analysis. here is my analitical and objective conclusion:

v8 rocks
v9 piece of shit.

funniest comment ever.

and soo true.

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: jddebug on December 08, 2016, 05:42:40 PM

Quote from: shadabahmed on December 08, 2016, 05:12:59 PM

Quote from: Simon_Grape on December 08, 2016, 04:38:58 PM

All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.

what is "-i 8" ? n how to use it
i have 4 rx 470 and 1 280X

i am using this code
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

Use:

ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x -i 8

-i 8 doesn't have to be 8. It can be anything between 1 and 8. 8 is just the most intense.

-i can be 0.....

auctioneeeeer

sr. member

Activity: 305

Merit: 250

Quote from: a7med918 on December 08, 2016, 05:07:03 PM

Which is more profitable now ZEC or ETH.?

ETH has been more profitable for a while now

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: shadabahmed on December 08, 2016, 05:47:12 PM

Quote from: jddebug on December 08, 2016, 05:42:40 PM

Quote from: shadabahmed on December 08, 2016, 05:12:59 PM

Quote from: Simon_Grape on December 08, 2016, 04:38:58 PM

All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.

what is "-i 8" ? n how to use it
i have 4 rx 470 and 1 280X

i am using this code
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

Use:

ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x -i 8

-i 8 doesn't have to be 8. It can be anything between 1 and 8. 8 is just the most intense.

ok if i want to use -i8 for 4X rx 470 cards and -i6 for 2X 280x cards what will be the code?

Put -i 8,8,8,8,8,8 <-----------for six cards. Claymore will adjust the intensity to suit each card. Let's say you have an RX 480, a 470, a 390, and three 280x, after Claymore adjusts you can change the -i value for each card and it might look something like this...... -i 8,8,8,6,6,6

shadabahmed

hero member

Activity: 616

Merit: 500

Quote from: jddebug on December 08, 2016, 05:42:40 PM

Quote from: shadabahmed on December 08, 2016, 05:12:59 PM

Quote from: Simon_Grape on December 08, 2016, 04:38:58 PM

All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.

what is "-i 8" ? n how to use it
i have 4 rx 470 and 1 280X

i am using this code
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

Use:

ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x -i 8

-i 8 doesn't have to be 8. It can be anything between 1 and 8. 8 is just the most intense.

ok if i want to use -i8 for 4X rx 470 cards and -i6 for 2X 280x cards what will be the code?

jddebug

sr. member

Activity: 446

Merit: 250

Quote from: shadabahmed on December 08, 2016, 05:12:59 PM

Quote from: Simon_Grape on December 08, 2016, 04:38:58 PM

All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.

what is "-i 8" ? n how to use it
i have 4 rx 470 and 1 280X

i am using this code
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

Use:

ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x -i 8

-i 8 doesn't have to be 8. It can be anything between 1 and 8. 8 is just the most intense.

denis1995

full member

Activity: 256

Merit: 100

What is the power consumption from the 280,280x cards?

gaah

newbie

Activity: 56

Merit: 0

Quote from: a7med918 on December 08, 2016, 05:07:03 PM

Which is more profitable now ZEC or ETH.?

whattomine.com

shadabahmed

hero member

Activity: 616

Merit: 500

Quote from: Simon_Grape on December 08, 2016, 04:38:58 PM

All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.

what is "-i 8" ? n how to use it
i have 4 rx 470 and 1 280X

i am using this code
ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x

a7med918

newbie

Activity: 33

Merit: 0

Which is more profitable now ZEC or ETH.?

awslazlo

newbie

Activity: 13

Merit: 0

Quote from: paintblack on December 08, 2016, 04:30:16 PM

after thorough analysis. here is my analitical and objective conclusion:

v8 rocks
v9 piece of shit.

i cry

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 375. (Read 3839163 times)