Well i have a strange drawback than
280x
V8 -214-216
V9 - 205-6
What is going on?
-i2 for both
280x
V8 -214-216
V9 - 205-6
What is going on?
-i2 for both
use a higher -i value
RTFM
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 391. (Read 3839163 times)
use a higher -i value
RTFM
My results when switching from v8 to v9:
RX480: 205 -> 235 sol/s
HD7970: 205 -> 215 sol/s
HD7950: 200 -> 210 sol/s (heavily modded Sapphire, clocks 1070/1500)
Good job and thanks, I see much improvement for Polaris!
RX480: 205 -> 235 sol/s
HD7970: 205 -> 215 sol/s
HD7950: 200 -> 210 sol/s (heavily modded Sapphire, clocks 1070/1500)
Good job and thanks, I see much improvement for Polaris!
v9.0:
- improved speed by 3-20% (depends on card model). About 310H/s on stock 390X, 220H/s on stock RX480, 295H/x on stock Nano.
- added "-i 7" and "-i 8" values, about 1% speedup, but can be unstable in some cases.
- added SSL/TLS encryption support for better security, see "-zpool" option description in Readme file for details.
- added "License.txt" file that contains the License Agreement.
- added "-v" option.
- several bug fixes and minor improvements.
- EthMan: improved saving options.
- improved speed by 3-20% (depends on card model). About 310H/s on stock 390X, 220H/s on stock RX480, 295H/x on stock Nano.
- added "-i 7" and "-i 8" values, about 1% speedup, but can be unstable in some cases.
- added SSL/TLS encryption support for better security, see "-zpool" option description in Readme file for details.
- added "License.txt" file that contains the License Agreement.
- added "-v" option.
- several bug fixes and minor improvements.
- EthMan: improved saving options.
What card shows highest hash rate increases (by your estimate?) Also. Are we at the end of the runway for updates or at least a significant slowdown of hash rate increases?
270x: +20%
4xx: +15%
I don't expect much higher speeds like +30-50%.
What happen to -a option?
On v8
R9 270x 115-120 sol
On V9
R9 270x 139-142 sol
R9 270x 115-120 sol
On V9
R9 270x 139-142 sol
Exactly the same for me.
I just tried the V9 my speeds have improved but for some reason 1 of my cards is hashing @ 416.995 H/s now that may sound great but all the shares are being rejected by that card?
I have all RX480 all with the same bios? Rest of the cards are all hashing around the 200+ mark .
Any Ideas anyone? I have restarted my rig to see if that would do anything
I have all RX480 all with the same bios? Rest of the cards are all hashing around the 200+ mark .
Any Ideas anyone? I have restarted my rig to see if that would do anything
Same (see up, two posts)
If you get any solutions please let me know, and I will do the same.
Have you tried disabling and then re-enabling the card? If i get a low hash rate this is what I do.
I just tried the V9 my speeds have improved but for some reason 1 of my cards is hashing @ 416.995 H/s now that may sound great but all the shares are being rejected by that card?
I have all RX480 all with the same bios? Rest of the cards are all hashing around the 200+ mark .
Any Ideas anyone? I have restarted my rig to see if that would do anything
I have all RX480 all with the same bios? Rest of the cards are all hashing around the 200+ mark .
Any Ideas anyone? I have restarted my rig to see if that would do anything
Same (see up, two posts)
If you get any solutions please let me know, and I will do the same.
I just tried the V9 my speeds have improved but for some reason 1 of my cards is hashing @ 416.995 H/s now that may sound great but all the shares are being rejected by that card?
I have all RX480 all with the same bios? Rest of the cards are all hashing around the 200+ mark .
Any Ideas anyone? I have restarted my rig to see if that would do anything
I have all RX480 all with the same bios? Rest of the cards are all hashing around the 200+ mark .
Any Ideas anyone? I have restarted my rig to see if that would do anything
Can this miner be installed to Linux? (ethos)
How?
How?
What do you think when you read WINDOWS ONLY in the 1st post?
Can this miner be installed to Linux? (ethos)
How?
How?
NO Linux or NVIDIA!!!
Background: This machine is a clone of another that is working 100%. It is 6x RX 480 Sapphire Nitro+
V7: 1x card working at HALF strength
V8: 1x card NOT working at all.
v9: 1x card working at TREBLE! strength
For some reason, one of the cards is working at ~650 Sol/s !!
I have restarted the machine multiple times while adjusting overclocks, remove overclocks, underclocking etc and this card still has numbers exceeding 600...
... the downside: lots and lots of REJECTED SHARES. 30%+
http://imgur.com/a/1FiDu
(The value's to the right are the ASIC scores. This is one of my 'in-the-middle' machines)
Any recommendations, solutions, suggestions?
Pre-emptively; the riser has been replaced multiple times, each with new risers to make sure one I didn't swap in a dud.
FYI: Each of my RX 480's are between 228-235 sol/s. Each machine is on average 1.380 KSol/s
V7: 1x card working at HALF strength
V8: 1x card NOT working at all.
v9: 1x card working at TREBLE! strength
For some reason, one of the cards is working at ~650 Sol/s !!
I have restarted the machine multiple times while adjusting overclocks, remove overclocks, underclocking etc and this card still has numbers exceeding 600...
... the downside: lots and lots of REJECTED SHARES. 30%+
http://imgur.com/a/1FiDu
(The value's to the right are the ASIC scores. This is one of my 'in-the-middle' machines)
Any recommendations, solutions, suggestions?
Pre-emptively; the riser has been replaced multiple times, each with new risers to make sure one I didn't swap in a dud.
FYI: Each of my RX 480's are between 228-235 sol/s. Each machine is on average 1.380 KSol/s
Stock settings:
R9 280X - 220 h/s
RX 480 - 232 h/s
THX Claymore.
R9 280X - 220 h/s
RX 480 - 232 h/s
THX Claymore.
Can this miner be installed to Linux? (ethos)
How?
How?
Hi Claymore!
Thx for the excellent software. But some problem has a place to be. If one of the cards hang, it is impossible to close Zecminer. In order to start it again. Even more...it is impossible to reboot a computer through windows. Could You comment this case?
Thx for the excellent software. But some problem has a place to be. If one of the cards hang, it is impossible to close Zecminer. In order to start it again. Even more...it is impossible to reboot a computer through windows. Could You comment this case?
MSI R9 390X-310 H/s-sadly 
On v8
R9 270x 115-120 sol
On V9
R9 270x 139-142 sol
R9 270x 115-120 sol
On V9
R9 270x 139-142 sol
Well i have a strange drawback than
280x
V8 -214-216
V9 - 205-6
What is going on?
-i2 for both
280x
V8 -214-216
V9 - 205-6
What is going on?
-i2 for both
Quote
Thankyou for sharing that sharing that top, my card has the stock fans but I guess overclocking the GPU to 1100 should help a little
NP, only reason it's watered cooled when i bought the card back in 2012 , i also bought a kit so if i hadn't done it then it probable would run hotter now, i wouldn't brother now .
hi after 18h of V9.0
HD8570m from 14 Sol to 17 Sol 21,5 %
Rig 1 ---> 6 * HD7790 1GB from 405 Sol to 495 Sol 22,2 %
Rig 2 ---> 4 * HD7850 2GB from 395 Sol to 485 Sol 22,8 %
Rig 3 ---> 2 * R9270 2 GB + 1 * HD7850 2 GB from 311 Sol to 375 Sol 20,5 %
All three Rigs from 1111 Sol to 1355 Sol 22,0 % power (wall) from 1460 watt to 1515 watt 3,8%
great work ----> thx a lot Claymore
HD8570m from 14 Sol to 17 Sol 21,5 %
Rig 1 ---> 6 * HD7790 1GB from 405 Sol to 495 Sol 22,2 %
Rig 2 ---> 4 * HD7850 2GB from 395 Sol to 485 Sol 22,8 %
Rig 3 ---> 2 * R9270 2 GB + 1 * HD7850 2 GB from 311 Sol to 375 Sol 20,5 %
All three Rigs from 1111 Sol to 1355 Sol 22,0 % power (wall) from 1460 watt to 1515 watt 3,8%
great work ----> thx a lot Claymore
Originally, I was quite skeptical of Claymore and I apologize in regards to that suspicion.
Claymore, thank you for everything you have done for us sir.
The miner and work is impressive!
Claymore, thank you for everything you have done for us sir.
The miner and work is impressive!
I still am skeptical of Claymore and all ways will be but that won't stop me from using it. no suspicion just skeptical .
l leave the fee on which is fine by me, sense I'm not told now like or not don't use it with no way around the Fee, there is a choice.
Jump to: