Sapphire RX480*6 = ~960 sols
1375/2000
Stable for 1+ hours now
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 553. (Read 3839204 times)
2 undervolted hynix and elpida 280x's doing 240 sols@330W
That is very good. What are the voltages and the clocks?
hynix: 1.050v 1000/1500
eloida 1.088v 1000/1500
I adjusted the stock bios
Has anyone compared Claymore 6.0 under Windows with alternative Linux miners (like Optiminer etc.)?
Especially for old 270x, 280x, 290x AMD cards.
Yes, 100s/s lower on 5 280x for optiminer...Especially for old 270x, 280x, 290x AMD cards.
Edit,
To be honest, the performance on 280x with Hynix is the same, ~140-144 s/s, 280x with elpida, ~130s/s, however for 7950, Claymore 6.0=127s/s, Optiminer = 70s/s
The reason may be not exactly the "miner", drivers also have a finger in this....
What motherboard/cpu/ram/os/drivers are you using for those speeds?
jus wen it gets unprofitable i check this thread and get more mining power ROFL
this is great keep it up! dev fee is well deserved!
this is great keep it up! dev fee is well deserved!
Has anyone compared Claymore 6.0 under Windows with alternative Linux miners (like Optiminer etc.)?
Especially for old 270x, 280x, 290x AMD cards.
Yes, 100s/s lower on 5 280x for optiminer...Especially for old 270x, 280x, 290x AMD cards.
Edit,
To be honest, the performance on 280x with Hynix is the same, ~140-144 s/s, 280x with elpida, ~130s/s, however for 7950, Claymore 6.0=127s/s, Optiminer = 70s/s
The reason may be not exactly the "miner", drivers also have a finger in this....
@Claymore, we need a new upgrade ASAP 
ZEC profitability is again almost the same as ETH...
ZEC profitability is again almost the same as ETH...
I was reading about the cpu that i have its a G3258 with stock 3.2 GHz but it seems like this cpu can be overclocked to 4.7 GHz and sometimes even higher but what i was wondering if i overclock this one will it be effective, will i see some higher Hash speeds in my rig? Somebody maybe already did this or somebody how nows that this will give something more in the rig? For gaming it will be better but will this also for zcash mining @ this higher block rates?
Can someone help me to set up nicehash pool on BTC address? It doesn't show me hashing in their web interface when I search after my BTC address that has been set up in the config file 
i'm also newbie here, we're on same page,pm me i'll help
USA - San Jose (WestHash)
ZecMiner64.exe -zpool equihash.usa.nicehash.com:3357 -zwal BTCADDRESS -allpools 1 -dbg -1
Europe - Amsterdam (NiceHash)
ZecMiner64.exe -zpool equihash.eu.nicehash.com:3357 -zwal BTCADDRESS -allpools 1 -dbg -1
China - Hong Kong (WestHash)
ZecMiner64.exe -zpool equihash.hk.nicehash.com:3357 -zwal BTCADDRESS -allpools 1 -dbg -1
Japan - Tokyo (WestHash)
ZecMiner64.exe -zpool equihash.jp.nicehash.com:3357 -zwal BTCADDRESS -allpools 1 -dbg -1
List of Stratum servers for Nicehash
Optional commands:
-mport remote monitoring/management port. Default port is 3333, specify "-mport 0" to disable remote monitoring/management feature.
Specify negative value to enable monitoring (get statistics) but disable management (restart, uploading files), for example, "-mport -3333" enables port 3333 for remote monitoring, but remote management will be blocked.
You can also use your web browser to see current miner state, for example, type "localhost:3333" in web browser.
-i mining intensity. Possible values: 0...4. 0 - lowest intensity and CPU usage, 4 - maximal intensity. You can also specify values for every card, for example "-i 4,2,4". Default value is "4".
-dbg debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
"-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.
I keep my -dbg to -1, because i don't need logs.
-mport 0 is what i use, i don't need remote monitoring.
-allpools 1, not sure if this is still needed for Nicehash, but i'll leave it there because i don't think it matters.
I leave -i alone.
Nicehash specific feature!
You can limit your miners to work on NiceHash only if the payment is good enough. You can still leave NiceHash as your primary stratum server. NiceHash stratum server will only be activated if the current average payment as displayed on NiceHash.com front page matches your price threshold. Otherwise miners will work normally on your backup/secondary pool.
Connect your miner to NiceHash and use password p=price instead of x.
Your miner will get disconnected from NiceHash stratum if current average payment is lower then your treshold. Miners will automatically reconnect to NiceHash stratum again when current average payment matches your price threshold.
The unit for the p= price parameter is according to the paying rate units as shown on the home page.
So for 0.1btc per day PER KHASH:
-zpsw 0.1
2 undervolted hynix and elpida 280x's doing 240 sols@330W
That is very good. What are the voltages and the clocks?
Can someone help me to set up nicehash pool on BTC address? It doesn't show me hashing in their web interface when I search after my BTC address that has been set up in the config file
i'm also newbie here, we're on same page,pm me i'll help
On your miner client, make sure you're using -u BTCADDRESS
After a few minutes, browse to: https://www.nicehash.com/index.jsp?p=miners&addr=BTCADDRESS
See sample below / 1st post in this thread
nicehash ZEC pool:
ZecMiner64.exe -zpool stratum.zcash.nicehash.com:3357 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq -zpsw x
nicehash Equihash pool:
ZecMiner64.exe -zpool equihash.usa.nicehash.com:3357 -zwal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -zpsw x
Can someone help me to set up nicehash pool on BTC address? It doesn't show me hashing in their web interface when I search after my BTC address that has been set up in the config file
i'm also newbie here, we're on same page,pm me i'll help
On your miner client, make sure you're using -u BTCADDRESS
After a few minutes, browse to: https://www.nicehash.com/index.jsp?p=miners&addr=BTCADDRESS
2 undervolted hynix and elpida 280x's doing 240 sols@330W
Claymore,
Thanks for your hard work
Thanks for your hard work
Speeeeeeed please lol let's go straight to version 8
Skip the V7?No sir! It brings such joy and happiness upgrade process itself..
Has anyone compared Claymore 6.0 under Windows with alternative Linux miners (like Optiminer etc.)?
Especially for old 270x, 280x, 290x AMD cards.
Especially for old 270x, 280x, 290x AMD cards.
Speeeeeeed please lol let's go straight to version 8
interesting...
according to this site the current reward for zcash is 7.4 zec per block... a few hours ago i read somewhere that the reward was 5.something zec.. it's increasing so fast..
https://explorer.zcha.in/statistics/network
I wonder when approximately the reward will reach 12.5...
according to this site the current reward for zcash is 7.4 zec per block... a few hours ago i read somewhere that the reward was 5.something zec.. it's increasing so fast..
https://explorer.zcha.in/statistics/network
I wonder when approximately the reward will reach 12.5...
early December?
https://z.cash/blog/slow-start-and-mining-ecosystem.html
Claymore - we feel the need for speed!
yes it's possible.... early december or maybe sooner....
and I also wonder when approximately Claymore will release his 7th version... hmmmm...
Probably when I leave for holiday so I can't upgrade the miner lol
hahaha..
interesting...
according to this site the current reward for zcash is 7.4 zec per block... a few hours ago i read somewhere that the reward was 5.something zec.. it's increasing so fast..
https://explorer.zcha.in/statistics/network
I wonder when approximately the reward will reach 12.5...
according to this site the current reward for zcash is 7.4 zec per block... a few hours ago i read somewhere that the reward was 5.something zec.. it's increasing so fast..
https://explorer.zcha.in/statistics/network
I wonder when approximately the reward will reach 12.5...
early December?
https://z.cash/blog/slow-start-and-mining-ecosystem.html
Claymore - we feel the need for speed!
yes it's possible.... early december or maybe sooner....
and I also wonder when approximately Claymore will release his 7th version... hmmmm...
Probably when I leave for holiday so I can't upgrade the miner lol
isp failure = 3.5 gb lte for 3 hours shit
i feel your pain.
check your PM.
need recomendations for good HW for ISP failover to LTE/4G
thanks!
Can someone help me to set up nicehash pool on BTC address? It doesn't show me hashing in their web interface when I search after my BTC address that has been set up in the config file
i'm also newbie here, we're on same page,pm me i'll help
Jump to: