I think there is a bug. When I start Claymores Zcash miner it set the clockspeed to 1250 even tho I have set them with Afterburner to 1350 where it runs stable.
I didn't even set the -mclock option and it should use my settings i made with msi afterburner.
It gets worse now..it also changes the vddc and cddc and makes the system unstable it set them to low 1.0750V regardless what i do. I rephrase: didn't set those in the config.txt whats going wrong here.
Any ideas why the miner is setting these even tho it is not SUPPOSED to change these settings.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 586. (Read 3839203 times)
Be really careful miners on your power use, according to my meter i only used around 14k kwh but with the feul cost and fees and taxes etc , my rate of .08 is actually closers to .22 !!!
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
i took a second look at this and it made my day
ENERGY/ELECTRIC FEES
Basic Service fee
Energy Summer fee
Energy Winter fee
Fuel Cost fee
Affordability fee
Resource Adjustment fee
Interim Rate Adj fee
City Fees fee
Transit Improvement Tax fee
City Tax fee
County Tax fee
State Tax fee
EXCHANGE FEES
trade fee
- ZEC to BTC
withdrawal fee
PURCHASING FEES
store markup fee
tax fee
(optional) delivery fee
MINING FEES
developer fee
claymore fee
pool fee
CASHOUT FEES
BTC to cash fee
ATM withdrawal fee
the only free here is my pee LOL
man your fee are worse then my power bill , some of them look like BS fee some one packets . the ones form your power bill . lamo i try not to watch all the fees to depressing ......and they want more .
I kind of question to my self those who say they have 3 cents a Kwh what no fees added to that. mine is 7.60 cents per KWH for a year before fees after BG and G does there thing adds another 100 bucks or so then it goes to about 11 or 12 cents with dis fee and lot of other little bs fees i did the math and it came to about 11 cents and some small number so i guess it's more 12 cents . They even screwed my area this summer with energy saving days, in my area we got none for two month after they reported the month we did they lost all most half billion or some stupid amount but called it they saved it customers that a mount which is BS so we didn't get any more days like that no matter how hot it got the rest of the summer while others in different parts of Maryland did .
so nothing new i know I'm not paying 7.60 cent per kwh more like 11 to 12 cents in some cases in my area if you buy direct from the power company it's 14 to 15 cents with out fees hate to see how high it goes, i don't buy direct .
so nothing new i know I'm not paying 7.60 cent per kwh more like 11 to 12 cents in some cases in my area if you buy direct from the power company it's 14 to 15 cents with out fees hate to see how high it goes, i don't buy direct .
Be really careful miners on your power use, according to my meter i only used around 14k kwh but with the feul cost and fees and taxes etc , my rate of .08 is actually closers to .22 !!!
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
i took a second look at this and it made my day
ENERGY/ELECTRIC FEES
Basic Service fee
Energy Summer fee
Energy Winter fee
Fuel Cost fee
Affordability fee
Resource Adjustment fee
Interim Rate Adj fee
City Fees fee
Transit Improvement Tax fee
City Tax fee
County Tax fee
State Tax fee
EXCHANGE FEES
trade fee
- ZEC to BTC
withdrawal fee
PURCHASING FEES
store markup fee
tax fee
(optional) delivery fee
MINING FEES
developer fee
claymore fee
pool fee
CASHOUT FEES
BTC to cash fee
ATM withdrawal fee
the only free here is my pee LOL
Did some1 have bios for 280x and 280 i meam 280 to 7970 with less power and higer sols like i read in 1 thread but i didnt understent where to put the commands. And what program to use for change it. Thanks you.
@Claymore, can we have a socks5 functionality in a future release?
thanks
thanks
Be really careful miners on your power use, according to my meter i only used around 14k kwh but with the feul cost and fees and taxes etc , my rate of .08 is actually closers to .22 !!!
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
That's why you buy energy blocks for your mining operation ahead of time if you draw enough power.
I'm also not sure how 14kw being $1900 = $0.22
What i need for emergy box? or i have only to buy it? 3000w energy box is it will work 24h at 3000w? Can you explain me more about it? Thanks you in advanced.
Be really careful miners on your power use, according to my meter i only used around 14k kwh but with the feul cost and fees and taxes etc , my rate of .08 is actually closers to .22 !!!
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
DESCRIPTION USAGE UNITS RATE CHARGE
BasicServiceChg $10.00
EnergyCharge Summer 2021.10 kWh $0.093950 $189.8
EnergyCharge Winter 12631.90 kWh $0.080400 $1,015.60
FuelCostCharge 14653 kWh $0.024695 $361.86
AffordabilityChrg $0.74
ResourceAdjustment $90.78
InterimRateAdj $94.21 Subtotal $1,763.07
CityFees 4.50% $79.34
TransitImprovementTax 0.25% $4.61
CityTax 0.50% $9.21
CountyTax 0.15% $2.77
StateTax 6.875% $126.67
Total $1,985.67
If in the US dont look at the rate you are actually paying for electricity check the ENTIRE bill with fees
well man this is nothing new it worked that way in every country, i guess many here that say they have very cheap electricity don't know how to check the bills properly and they are actually payign a fortune
if your bills is done right it should report the full cost of the kw/h not just the cost at the source
So the 20 sec restart equals the 20 sec dev fee 
@Claymore
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
I don't know the timing on it, but if it was at a set time at the end of an hour, some people would just have a script restart it every 55 minutes, since restart is less time than devfee.
What would be better is if it just didn't reset time on watchdog restart, but kept track of how much time you mined better.
It is better to just have stable settings anyway, since unstable cards can also freeze system, or cause system restarts, which are longer. (not too bad on SSD).
Watchdog is a failsafe, it shouldn't be used to run unstable clocks/voltages/timings.
Watchdog is a failsafe, it shouldn't be used to run unstable clocks/voltages/timings.
That's true. No need for watchdog here, since everything has been running stable for days.P.S. Just noticed it again: Dev fee runs for about 20 sec.
@Claymore
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
I don't know the timing on it, but if it was at a set time at the end of an hour, some people would just have a script restart it every 55 minutes, since restart is less time than devfee.
What would be better is if it just didn't reset time on watchdog restart, but kept track of how much time you mined better.
It is better to just have stable settings anyway, since unstable cards can also freeze system, or cause system restarts, which are longer. (not too bad on SSD).
Watchdog is a failsafe, it shouldn't be used to run unstable clocks/voltages/timings.
@Claymore
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
yeah ive seen this too
so it seems that stock bios cards work better on the RX series for ZEC mining, my stock 470s do 120h/s and my strap modded ones for eth do 109-114
BTW, did anybody else notice that since v5 the fee has been reduced? The dev fee is only mined for 20 sec per hour here
@Claymore
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
Please adjust the timing of when your devfee starts. As it is your miner starts the devfee after X amount of mining time. But if watchdog kicks in a restarts the miner, it restarts the devfee countdown. This means that when a miner, your miner, has a problem it requeues the devfee to start well before an hour has past. To test it I "challenged" a card to ultimately fail so watchdog would restart. In 67 minutes your devfee started 4 times. The devfee needs to start at the END of an hour of mining, not a few minutes into it.
i am getting some problem with 1 rig which i am using 2 cards rx480 8gb and 2 cards r9380 4gb so problem i am facing that when i use version claymore 4.0 its works fine all cards hashing and also all cards detected
But when i am using version claymore 5.0 all cards detected but only rx480 8gb hashing and other 2 cards r9380 4gb not hashing its showing 0.0 H/s
i am using AMD driver 16.7.3 and using windows 7 64 bit
please help me
Read the last 5-10 pages! This question has been answered many, many times before!!! But when i am using version claymore 5.0 all cards detected but only rx480 8gb hashing and other 2 cards r9380 4gb not hashing its showing 0.0 H/s
i am using AMD driver 16.7.3 and using windows 7 64 bit
please help me
6.0 today?
5.0 was literally just released...
i am getting some problem with 1 rig which i am using 2 cards rx480 8gb and 2 cards r9380 4gb so problem i am facing that when i use version claymore 4.0 its works fine all cards hashing and also all cards detected
But when i am using version claymore 5.0 all cards detected but only rx480 8gb hashing and other 2 cards r9380 4gb not hashing its showing 0.0 H/s
i am using AMD driver 16.7.3 and using windows 7 64 bit
please help me
But when i am using version claymore 5.0 all cards detected but only rx480 8gb hashing and other 2 cards r9380 4gb not hashing its showing 0.0 H/s
i am using AMD driver 16.7.3 and using windows 7 64 bit
please help me
6.0 today?
Jump to: