Author

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 611. (Read 3839203 times)

hero member
Activity: 574
Merit: 500
This is the only miner rig on the main ISP router, the rest of the rigs are on a different router.

Looks like someone is trying to HACK  IN



Adaseb, do u mind to share ur bat config to mining in miningrigrentals? thank you  Smiley
legendary
Activity: 2746
Merit: 1181
I'm running Windows 10 on both my 6 and 7 card rigs and didn't need to do anything fancy. Just installed OS and latest drivers and start mining. Just works.

That guy spoiled my weekend Smiley
I will release new version in a few hours.

Awesome, looking forward to it.

Yea i usually don't have any issues, but the newer RX480 cards have been giving me some trouble, all the previous models work fine,

if the fix and the drivers don't solve it, i might switch them to a diff mobo, maybe the anniversary one and beef up the ram and cpu.

thanks!

If you are using all new risers and USB cables then check the cables, get some better quality ones. All the issues I've had previously with cards not being detected or causing problems was caused by crap cables that couldn't handle PCIe GEN2. alternatively, if you can with your board, try forcing the PCIe slots to GEN1, it can solve these problems too.

yea all my risers are top end and new, and tried to swap...so im thinking ill do the drivers, patch, and then try the gen 1, if all fails new mobo to rule everything out.

thanks!
hero member
Activity: 682
Merit: 500
I'm running Windows 10 on both my 6 and 7 card rigs and didn't need to do anything fancy. Just installed OS and latest drivers and start mining. Just works.

That guy spoiled my weekend Smiley
I will release new version in a few hours.

Awesome, looking forward to it.

Yea i usually don't have any issues, but the newer RX480 cards have been giving me some trouble, all the previous models work fine,

if the fix and the drivers don't solve it, i might switch them to a diff mobo, maybe the anniversary one and beef up the ram and cpu.

thanks!

If you are using all new risers and USB cables then check the cables, get some better quality ones. All the issues I've had previously with cards not being detected or causing problems was caused by crap cables that couldn't handle PCIe GEN2. alternatively, if you can with your board, try forcing the PCIe slots to GEN1, it can solve these problems too.
hero member
Activity: 924
Merit: 1000
Fingers nervously tapping table...  Headplant!

Put some more gravy on those mash-tatos.
legendary
Activity: 2408
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
This is the only miner rig on the main ISP router, the rest of the rigs are on a different router.

Looks like someone is trying to HACK  IN


That is a stratum command.. Not sure what you are thinking keeping a management port of any kind open to the internet, it doesn't take more than a few hours for a scan to come across with someone looking for miner related ports..

whats your network topography are you exposing your miners on the WAN so you can  remotely access them ?
sr. member
Activity: 430
Merit: 254
Too early for these two since v5.0 isn't published yet. But it will happen, no "worries".

Linux version doing 120 sols/s per RX470/480 with very little power draw (~100w per gpu @ the wall). Good luck matching that.

👏👏👏👏👏 pound that chest!!  Ermmmergerd I've got the fastest miner.  I'm gonna get an extra 100% on my 3$ a day for the next 12 hours 😂   Competition brings out rare sides of people.  Ugly if you ask me.  But as "they" say it's good for us. As far as an example on how not to be humble this should prove worthy!  SilentArmy anything but!  More like whinymilitia if you asky me.

BR

What did you expect from a user with this track record (see below) of calling Claymore a thief and whatnot. A Linux marxist on top of that. Worst combination.

Examples:

This makes you wonder how much of other people's code Claymore steals without giving credit.
Other of his binaries are "packed" to avoid disassembling. Gee, I wonder what he is hiding.

If i had to guess, either the licensing is being fixed or code functions are being rewritten or binary is being packed to prevent further auditing.
Take your pick Wink

After throwing this at Claymore, I am wondering what this guy is still doing here?

He also said this about Claymore:

This isn't a question about the fee. This is about outright stealing other people's code and not giving credit where it is due.

Sounds good, right. A person driven by principles and fairness, or not?
Oh wait...

* The ability to remove (or share with the XMR dev fund) the (5%) Claymore fee (by appending ":Claymore" to your workers)
  EG: ADDRESS.PAYMENTID.WORKERID:Claymore  (Personally, i think that one is quite important as the XMR dev fund needs help)
  5% is daylight robbery!

Hey, Hotmetal, so you POS really proposed that miners and pools should defraud Claymore of his 5% dev fee for the XMR miner in 2014 by stealing the funds mined to his worker? You seem to have no problem stealing Claymore's money for his hard work. And you accuse him of theft? GTFO of here.

Who's next?!


I'd like to know what miner he is using to get those hash rates. Obviously he is not using Optiminer since it has a 15% dev fee, and 5% is highway robbery.

It seems I must be here all the time, as soon as I decide to take a break, something interesting happens Smiley
Ok, I did not check this new Linux miner, but it seems it's faster than current version of my miner, at least in Linux.
So in a day I will release faster version.

Frontrunning: November 13
- Why you release faster miner? ? ? ? ? Roll Eyes Roll Eyes Roll Eyes  Now we all must pay more for electricity and we will all mine same coins anyway, so much less profit!!!!!!!!!!!!!  Angry Angry Angry

Don't update speed, now power same as eth miner  Angry, you earn more in 1-2 days and pay more electric forever because everybody will update miner then profit is still same

CHECK


Nailed it! Cheesy
newbie
Activity: 5
Merit: 0
When 5.1 will be available?  Huh  Grin
sr. member
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
That guy spoiled my weekend Smiley
I will release new version in a few hours.

Haha.. Cheers buddy,. you are the best. My 2.5% fee still continues

 Grin Grin Grin Grin Grin Grin Grin
legendary
Activity: 2746
Merit: 1181
I'm running Windows 10 on both my 6 and 7 card rigs and didn't need to do anything fancy. Just installed OS and latest drivers and start mining. Just works.

That guy spoiled my weekend Smiley
I will release new version in a few hours.

Awesome, looking forward to it.

Yea i usually don't have any issues, but the newer RX480 cards have been giving me some trouble, all the previous models work fine,

if the fix and the drivers don't solve it, i might switch them to a diff mobo, maybe the anniversary one and beef up the ram and cpu.

thanks!
hero member
Activity: 565
Merit: 500
That guy spoiled my weekend Smiley
I will release new version in a few hours.
Grin
sr. member
Activity: 378
Merit: 250
That guy spoiled my weekend Smiley
I will release new version in a few hours.

/cheer
hero member
Activity: 682
Merit: 500
I'm running Windows 10 on both my 6 and 7 card rigs and didn't need to do anything fancy. Just installed OS and latest drivers and start mining. Just works.

That guy spoiled my weekend Smiley
I will release new version in a few hours.

Awesome, looking forward to it.
donator
Activity: 1610
Merit: 1325
Miners developer
That guy spoiled my weekend Smiley
I will release new version in a few hours.
legendary
Activity: 2746
Merit: 1181
I don't have this :  (especially if you have applied the 6 GPU fix).

do you have a link for it?

https://bitcointalksearch.org/topic/7xgpu-windows-modding-amd-video-driver-is-the-answer-712228


win 10 enterprise

what version are the drivers you set up?


Latest one available.

yea on win 10, but isnt that an old mod for win 8 ?

thanks!
legendary
Activity: 3808
Merit: 1723
6 GPUS wont work with Windows 7 if they are RX 470 / RX 480.

Install Windows 10.
sr. member
Activity: 378
Merit: 250
I don't have this :  (especially if you have applied the 6 GPU fix).

do you have a link for it?

https://bitcointalksearch.org/topic/7xgpu-windows-modding-amd-video-driver-is-the-answer-712228


win 10 enterprise

what version are the drivers you set up?


Latest one available.
legendary
Activity: 2746
Merit: 1181
What's the concensus on the drivers for the RX480 Nitro?

Running on an asrock H81 Pro BTC mobo with 8GB ram and a basic Pentium Processor. Using all powered usb risers as in the rest of my rigs, with additional motherboard molex power standard.

All my other rigs are fine, keep getting that opencl hang error on the 480 rig though, and it only sees 5 of the 6 cards as well Sad

I think it updated to the latest drivers, and in global settings I see under the Opencl info, it has some weird characters...maybe an older version of the drivers?

any suggestions are welcome.

thanks!

Built a friend's rig with pretty much the same comp as yours. Windows 10 should see all those cards (especially if you have applied the 6 GPU fix).
No errors or any funnies. (running on latest drivers). What version of windows are you using?

I don't have this :  (especially if you have applied the 6 GPU fix).

do you have a link for it?

win 10 enterprise

what version are the drivers you set up?

thanks!
sr. member
Activity: 512
Merit: 260
@claymore I am about to change to Linux so I do hope you manage to much O soon
sr. member
Activity: 378
Merit: 250
What's the concensus on the drivers for the RX480 Nitro?

Running on an asrock H81 Pro BTC mobo with 8GB ram and a basic Pentium Processor. Using all powered usb risers as in the rest of my rigs, with additional motherboard molex power standard.

All my other rigs are fine, keep getting that opencl hang error on the 480 rig though, and it only sees 5 of the 6 cards as well Sad

I think it updated to the latest drivers, and in global settings I see under the Opencl info, it has some weird characters...maybe an older version of the drivers?

any suggestions are welcome.

thanks!

Built a friend's rig with pretty much the same comp as yours. Windows 10 should see all those cards (especially if you have applied the 6 GPU fix).
No errors or any funnies. (running on latest drivers). What version of windows are you using?
legendary
Activity: 3808
Merit: 1723
How you run opimimer?
OT. Look in the optiminer thread.
Searched before i asked and still cant find it.

Dont bother. It doesn't work on Windows anyways.
Jump to: