Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 659.

TR8888

hero member

Activity: 525

Merit: 500

Quote from: magicsys.nw on November 10, 2016, 04:24:14 AM

I got a problem here.
6 cards in a rig. R9 390. 1100/1500 +50 power lim.
Win 8.1
Driver 15.12
12 gb memory
H81 pro btc + g1840
The problem is miner hangs when 1 card goes to 0 speed. Can't even close the window with miner. Only reboot helps.

The card that hangs likely has a USB-riser thats on it's way out. Try changing just that cards riser.

magicsys.nw

newbie

Activity: 66

Merit: 0

I got a problem here.
6 cards in a rig. R9 390. 1100/1500 +50 power lim.
Win 8.1
Driver 15.12
12 gb memory
H81 pro btc + g1840
The problem is miner hangs when 1 card goes to 0 speed. Can't even close the window with miner. Only reboot helps.

ivanpop

newbie

Activity: 62

Merit: 0

Has anyone tried 3.0 or 3.1 with r9 380 a 4gb?
I get around 40mh with -i 2, with modded bios and 880/1625 clocks.

nguyenphuong

newbie

Activity: 4

Merit: 0

Hi d57heinz, I'm a new to mining cryptocurrencies. I have some question, can you help me?

1. I'm in ASIA so i should use STRATUM Asia?
2. What are different between ports?
3. I have 4 workers, each worker have 160H/s AVG, which is port should i use for my worker?

Thank for your help! Sorry for my bad English!

deucedeuce37

newbie

Activity: 11

Merit: 0

Quote from: d57heinz on November 10, 2016, 03:43:43 AM

Quote from: deucedeuce37 on November 10, 2016, 03:40:03 AM

Quote from: d57heinz on November 10, 2016, 03:18:24 AM

Quote from: ReFLex001 on November 10, 2016, 02:52:09 AM

Quote from: deucedeuce37 on November 10, 2016, 02:39:13 AM

Any advice on which port to use for 330 sol/s rigs?
PORT (VARDIFF):   7007
HIGH DIFF PORT (VARDIFF):   7077
STATIC PORT (DIFF20):   8008
STATIC PORT (DIFF500):   8088

HIGH DIFF PORT (VARDIFF): 7077 - the best in my opinion

http://image.prntscr.com/image/4a37eba5c01f4938966aad14df849032.png

Reason I like to use a vardiff port is to try and get a share within a few seconds. I prefer to have my rig run about double to triple diff to hash. So if I have a 100 sol/s rig my diff would be around 200-300. That way when I have a block change and shares are rejected I don't loose as much work. I'd rather a 300 diff share be rejected vs 6400. That is my reasoning. To each their own. It really boils down to how your rig performs on each port. Everyone will have different results if only perspective.

BR

I tried port 7007 and after a little while the dashboard showed that my worker was adjusted from 500H all the way up to 6000H. I then tried port 7077 and it very quickly adjusted my worker back down down to 6000H from 6400H. I guess it doesn't make much difference but it looks like port 7077 gets my worker where the pool wants it faster. If you really want a lower difficulty then you would need to use one of the static ports (8088).

Yes your not giving it enough time. It freaks out a bit a first since you bombard it with shares on 7007. Then after adjusting high as heck it will start to correct down. Give it about an hour and it will be settled in. Again it's what works best for you.

BR

Thanks, will let each one run for a few hours to see where they stabilize and then pick one. Maybe they need a third vardiff port that starts at ~2000

semajjames

hero member

Activity: 528

Merit: 500

chafer99

member

Activity: 99

Merit: 10

R-370 -i 2 = 35H/s, but failover switch decreasing to 25 H/s

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: deucedeuce37 on November 10, 2016, 03:40:03 AM

Quote from: d57heinz on November 10, 2016, 03:18:24 AM

Quote from: ReFLex001 on November 10, 2016, 02:52:09 AM

Quote from: deucedeuce37 on November 10, 2016, 02:39:13 AM

Any advice on which port to use for 330 sol/s rigs?
PORT (VARDIFF):   7007
HIGH DIFF PORT (VARDIFF):   7077
STATIC PORT (DIFF20):   8008
STATIC PORT (DIFF500):   8088

HIGH DIFF PORT (VARDIFF): 7077 - the best in my opinion

Reason I like to use a vardiff port is to try and get a share within a few seconds. I prefer to have my rig run about double to triple diff to hash. So if I have a 100 sol/s rig my diff would be around 200-300. That way when I have a block change and shares are rejected I don't loose as much work. I'd rather a 300 diff share be rejected vs 6400. That is my reasoning. To each their own. It really boils down to how your rig performs on each port. Everyone will have different results if only perspective.

BR

I tried port 7007 and after a little while the dashboard showed that my worker was adjusted from 500H all the way up to 6000H. I then tried port 7077 and it very quickly adjusted my worker back down down to 6000H from 6400H. I guess it doesn't make much difference but it looks like port 7077 gets my worker where the pool wants it faster. If you really want a lower difficulty then you would need to use one of the static ports (8088).

Yes your not giving it enough time. It freaks out a bit a first since you bombard it with shares on 7007. Then after adjusting high as heck it will start to correct down. Give it about an hour and it will be settled in. Again it's what works best for you.

BR

deucedeuce37

newbie

Activity: 11

Merit: 0

Quote from: d57heinz on November 10, 2016, 03:18:24 AM

Quote from: ReFLex001 on November 10, 2016, 02:52:09 AM

Quote from: deucedeuce37 on November 10, 2016, 02:39:13 AM

Any advice on which port to use for 330 sol/s rigs?
PORT (VARDIFF):   7007
HIGH DIFF PORT (VARDIFF):   7077
STATIC PORT (DIFF20):   8008
STATIC PORT (DIFF500):   8088

HIGH DIFF PORT (VARDIFF): 7077 - the best in my opinion

http://image.prntscr.com/image/4a37eba5c01f4938966aad14df849032.png

Reason I like to use a vardiff port is to try and get a share within a few seconds. I prefer to have my rig run about double to triple diff to hash. So if I have a 100 sol/s rig my diff would be around 200-300. That way when I have a block change and shares are rejected I don't loose as much work. I'd rather a 300 diff share be rejected vs 6400. That is my reasoning. To each their own. It really boils down to how your rig performs on each port. Everyone will have different results if only perspective.

BR

I tried port 7007 and after a little while the dashboard showed that my worker was adjusted from 500H all the way up to 6000H. I then tried port 7077 and it very quickly adjusted my worker back down down to 6000H from 6400H. I guess it doesn't make much difference but it looks like port 7077 gets my worker where the pool wants it faster. If you really want a lower difficulty then you would need to use one of the static ports (8088).

TR8888

hero member

Activity: 525

Merit: 500

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

ekrem

full member

Activity: 235

Merit: 100

what is this bug with version 3.1 i have around 20% dev fee

dev mining time 08:52:11 to 09:06:12 =14min after this i manual closed minner

Code:

08:52:11:334 3f4 DevFee: ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333
08:52:11:412 3f4 DevFee: ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333)
08:52:16:131 3f4 checkread timeout

08:52:58:461 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
08:53:12:681 b08 ZEC: put share nonce 1253
08:53:12:681 b08 ZEC round found 1 shares

08:53:18:478 3f4 DevFee: ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333
08:53:18:540 3f4 DevFee: ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333)
08:53:20:431 7b8 ZEC: put share nonce 1530
08:53:20:478 7b8 ZEC round found 1 shares
08:53:20:494 4fc ZEC: 11/10/16-08:53:20 - SHARE FOUND - (GPU 1)

08:54:05:637 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
08:54:07:793 4fc got 293 bytes
08:54:07:793 4fc buf: {"id":null,"method":"mining.notify","

8:54:19:622 4fc new buf size: 0
08:54:25:669 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
08:54:25:794 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)
08:54:30:529 3f4 checkread timeout
08:54:35:263 3f4 checkread timeout
08:54:37:732 934 ZEC: put share nonce b1e
08:54:37:732 934 ZEC round found 1 shares
08:54:37:748 4fc ZEC: 11/10/16-08:54:37 - SHARE FOUND - (GPU 1)

08:55:31:329 4fc new buf size: 0
08:55:35:688 3f4 checkread timeout
08:55:35:688 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
08:55:44:236 7b8 ZEC: put share nonce 23f4
08:55:44:251 7b8 ZEC round found 1 shares
08:55:48:408 4fc ZEC: 11/10/16-08:55:44 - SHARE FOUND - (GPU 1)

08:55:48:595 4fc ZEC: Share accepted (140 ms)!

08:55:48:595 4fc new buf size: 0
08:55:55:736 3f4 DevFee: ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333
08:55:55:814 3f4 DevFee: ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333)
08:56:00:596 3f4 checkread timeout
08:56:01:268 934 ZEC: put share nonce 2a5f
08:56:01:268 934 ZEC round found 1 shares
08:56:01:283 4fc ZEC: 11/10/16-08:56:01 - SHARE FOUND - (GPU 1)

08:56:43:067 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
08:57:03:083 3f4 DevFee: ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333
08:57:03:146 3f4 DevFee: ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333)
08:57:04:240 db4 GPU0 t=50C fan=45%, GPU1 t=49C fan=45%, GPU2 t=60C fan=45%, GPU3 t=48C fan=45%, GPU4 t=52C fan=45%
08:57:04:255 db4 em hbt: 0, fm hbt: 1172,
08:57:04:255 db4 watchdog - thread 0, hb time 1

08:57:50:273 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
08:57:59:430 ef8 ZEC: put share nonce 2a08
08:57:59:430 ef8 ZEC round found 1 shares
08:57:59:446 4fc ZEC: 11/10/16-08:57:59 - SHARE FOUND - (GPU 0)
08:57:59:446 4fc send share: {"id": 4, "method": "mining.submit", "params": ["ekrem.2","10d","061a2458","082a0000000000000000000000000000","fd4005007830795f92b4d7f5dc12f1a0a6aef9e46112ca6e3ac3426cdbb521e3db41345d32aba489fe26f2b5b

08:58:10:118 4fc ZEC: Share accepted (141 ms)!

08:58:10:181 4fc new buf size: 0
08:58:10:306 3f4 DevFee: ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333
08:58:10:368 3f4 DevFee: ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333)
08:58:15:103 3f4 checkread timeout

08:58:50:480 4fc parse packet: 35
08:58:50:495 4fc ZEC: Share accepted (141 ms)!

08:58:50:495 4fc new buf size: 0
08:58:52:792 3f4 checkread timeout
08:58:57:543 3f4 checkread timeout
08:58:57:543 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...

08:59:17:559 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
08:59:17:669 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)
08:59:17:700 264 ZEC: put share nonce 1a3c
08:59:17:700 264 ZEC round found 1 shares
08:59:17:716 4fc ZEC: 11/10/16-08:59:17 - SHARE FOUND - (GPU 4)
08:59:17:716 4fc send share: {"id": 4, "method": "mining.submit", "params":

09:00:04:874 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
09:00:07:890 4fc got 412 bytes
09:00:07:890 4fc buf:

09:00:22:172 4fc new buf size: 0
09:00:24:907 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
09:00:25:032 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)
09:00:27:110 934 ZEC: put share nonce 722
09:00:27:126 934 ZEC round found 1 shares
09:00:27:141 4fc ZEC: 11/10/16-09:00:27 - SHARE FOUND - (GPU 1)
09:00:27:141 4fc send share: {"id": 4, "method": "mining.submit", "params": ["ekrem.2","10f","f61a2458","22070000000000000000000000000000","fd4005000e2bb0ae058851255c322efa59fde52cf01f903305de8db53cd69226e0f821f2feb818ba9fb6f9b75

09:01:22:878 db4 em hbt: 0, fm hbt: 57985,
09:01:12:237 3f4 checkread timeout
09:01:22:878 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...

09:01:26:363 4fc buf: {"id":4,"result":true,"error":null}

09:01:26:379 4fc parse packet: 35
09:01:26:379 4fc ZEC: Share accepted (125 ms)!

09:01:26:410 4fc new buf size: 0
09:01:42:895 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666

09:01:26:379 4fc ZEC: Share accepted (125 ms)!

09:01:26:410 4fc new buf size: 0
09:01:42:895 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
09:01:43:005 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)

09:02:25:460 3f4 checkread timeout
09:02:30:179 3f4 checkread timeout
09:02:30:179 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...

09:02:50:196 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
09:02:50:336 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)
09:02:55:055 3f4 checkread timeout
09:02:56:149 db4 GPU0 t=50C fan=45%, GPU1 t=49C fan=45%, GPU2 t=59C fan=45%, GPU3 t=47C fan=45%, GPU4 t=51C fan=45%

09:03:37:479 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
09:03:57:512 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
09:03:57:621 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)

09:04:44:827 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec.

09:05:04:875 3f4 DevFee: ZEC: Stratum - connecting to 'zec-eu1.nanopool.org' <185.71.66.31> port 6666
09:05:05:000 3f4 DevFee: ZEC: Stratum - Connected (zec-eu1.nanopool.org:6666)

09:05:52:049 3f4 DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...

09:06:12:081 3f4 DevFee: ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333
09:06:12:159 3f4 DevFee: ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333)

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: ReFLex001 on November 10, 2016, 02:52:09 AM

Quote from: deucedeuce37 on November 10, 2016, 02:39:13 AM

Any advice on which port to use for 330 sol/s rigs?
PORT (VARDIFF):   7007
HIGH DIFF PORT (VARDIFF):   7077
STATIC PORT (DIFF20):   8008
STATIC PORT (DIFF500):   8088

HIGH DIFF PORT (VARDIFF): 7077 - the best in my opinion

Reason I like to use a vardiff port is to try and get a share within a few seconds. I prefer to have my rig run about double to triple diff to hash. So if I have a 100 sol/s rig my diff would be around 200-300. That way when I have a block change and shares are rejected I don't loose as much work. I'd rather a 300 diff share be rejected vs 6400. That is my reasoning. To each their own. It really boils down to how your rig performs on each port. Everyone will have different results if only perspective.

BR

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: Nthused on November 09, 2016, 10:02:19 PM

Hmmm some people are reporting better hashrate with more recent drivers with the latest version of the miner, I am still using 15.12 AMD Drivers and with Claymore's AMD GPU Miner 3.1 I went from 46-50 SOL/s to 50-55 SOL/s with stock GPU settings & no increase in intensity at all on a R9 280x

Should we stay on 15.12 or upgrade to 16.9+ Drivers ?

I'm on the more recent drivers. Doing approx 56 sols with my R9 280x. (From 52 - 59 so 56 average)

I also use the "-i 2" setting. If you're not using that setting try that first before changing your driver. See if that improves your speeds.

ReFLex001

newbie

Activity: 5

Merit: 0

Quote from: deucedeuce37 on November 10, 2016, 02:39:13 AM

Any advice on which port to use for 330 sol/s rigs?
PORT (VARDIFF):   7007
HIGH DIFF PORT (VARDIFF):   7077
STATIC PORT (DIFF20):   8008
STATIC PORT (DIFF500):   8088

HIGH DIFF PORT (VARDIFF): 7077 - the best in my opinion

http://image.prntscr.com/image/4a37eba5c01f4938966aad14df849032.png

louiseth1

legendary

Activity: 924

Merit: 1000

Bitfarms.io

Quote from: AzzAz on November 09, 2016, 11:34:29 PM

Quote from: louiseth1 on November 09, 2016, 11:23:06 PM

Huh.. He did release 1.1 in linux.

Usually when you have a solid source (and he does, and he already produced windows and linux binaries on previous releases) it is easy to compile for all platforms from the same source code. Are you sure you know what you are talking about?

Claymore said few times he will not do linux after 1.1. Read the tread.

I did, just looking for a legit reason not to release it which someone else provided (the fact Claymore has a hard time packing his binary to avoid it from being reversed).

Golku

full member

Activity: 263

Merit: 100

Thanks for the new update!

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: Havane on November 10, 2016, 02:36:08 AM

Quote from: d57heinz on November 10, 2016, 02:06:49 AM

To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now. Test it for yourselves.

Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money! Really does give crypto a bad wrap.

BR
d57heinz

How do you do your calcs ?

I use this site here. https://www.cryptocompare.com/mining/calculator/zec

@dueceduece37
Use port 7007. The high diff static port starts at 32k. A bit much. Vardiff starts at 192 and adjusts accordingly

deucedeuce37

newbie

Activity: 11

Merit: 0

Quote from: d57heinz on November 10, 2016, 02:06:49 AM

To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now. Test it for yourselves.

Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money! Really does give crypto a bad wrap.

BR
d57heinz

Any advice on which port to use for 330 sol/s rigs?
PORT (VARDIFF):   7007
HIGH DIFF PORT (VARDIFF):   7077
STATIC PORT (DIFF20):   8008
STATIC PORT (DIFF500):   8088

Havane

jr. member

Activity: 76

Merit: 3

Quote from: d57heinz on November 10, 2016, 02:06:49 AM

To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now. Test it for yourselves.

Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money! Really does give crypto a bad wrap.

BR
d57heinz

How do you do your calcs ?

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 659. (Read 3839163 times)