Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 660.

deucedeuce37

newbie

Activity: 11

Merit: 0

Quote from: fredeq on November 10, 2016, 01:25:59 AM

Quote from: deucedeuce37 on November 10, 2016, 01:18:26 AM

HW:
- 6x Reference Sapphire RX 470 OC 4GB (5x Elpida memory/1x Hynix memory)
- Gigabyte GA-Z97X-Gaming 3, Rev 1.0, Bios F8d (disabled USB3, lan, serial, audio, virtualization, and on chip vga)
- G1840 CPU
- 4G DDR3 1600MHz Single Channel
- 120GB Micron m600 m.2 Sata SSD
- RT73 USB wireless-n
- PSU: 1200W Corsair AX1200i
- 6x powered USB risers v006

SW:
- Win10 Pro 64-bit version 1607 (anniversary edition) fully updated, stripped out a little bloatware
- Crimson 16.10.3
- Claymore v 3.1 (-i 2 -dbg -1 -colors 0)

Results:
- Reported Hashrate: 335 sol/s (56 sol/s per card)
- Power: 610W

BIOS Settings
- GPU 1100 @ 900mV
- Mem 1900 @ 900mv with timings from 1500MHz
- Fan 3800RPM / 60%

Stable for a few hours with 47C card temps. Will retry with an i5 4690k and 8gb 2133 mhz ram tomorrow. Also tempted to try 16.11.x drivers.

How did you edit bios for elipda cards? It doesnt work in PolarisBiosEditor, right?

PolarisBiosEditor worked fine for me with both memory types. Maybe it was a different card that other people were having problems with Elpida on. If you have one of those cards there is a thread on the ethereum community forum on how to edit it with a hex editor.

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: deucedeuce37 on November 10, 2016, 01:18:26 AM

HW:
- 6x Reference Sapphire RX 470 OC 4GB (5x Elpida memory/1x Hynix memory)
- Gigabyte GA-Z97X-Gaming 3, Rev 1.0, Bios F8d (disabled USB3, lan, serial, audio, virtualization, and on chip vga)
- G1840 CPU
- 4G DDR3 1600MHz Single Channel
- 120GB Micron m600 m.2 Sata SSD
- RT73 USB wireless-n
- PSU: 1200W Corsair AX1200i
- 6x powered USB risers v006

SW:
- Win10 Pro 64-bit version 1607 (anniversary edition) fully updated, stripped out a little bloatware
- Crimson 16.10.3
- Claymore v 3.1 (-i 2 -dbg -1 -colors 0)

Results:
- Reported Hashrate: 335 sol/s (56 sol/s per card)
- Power: 610W

BIOS Settings
- GPU 1100 @ 900mV
- Mem 1900 @ 900mv with timings from 1500MHz
- Fan 3800RPM / 60%

Stable for a few hours with 47C card temps. Will retry with an i5 4690k and 8gb 2133 mhz ram tomorrow. Also tempted to try 16.11.x drivers.

How did you edit bios for elipda cards? It doesnt work in PolarisBiosEditor, right?

deucedeuce37

newbie

Activity: 11

Merit: 0

HW:
- 6x Reference Sapphire RX 470 OC 4GB (5x Elpida memory/1x Hynix memory)
- Gigabyte GA-Z97X-Gaming 3, Rev 1.0, Bios F8d (disabled USB3, lan, serial, audio, virtualization, and on chip vga)
- G1840 CPU
- 4G DDR3 1600MHz Single Channel
- 120GB Micron m600 m.2 Sata SSD
- RT73 USB wireless-n
- PSU: 1200W Corsair AX1200i
- 6x powered USB risers v006

SW:
- Win10 Pro 64-bit version 1607 (anniversary edition) fully updated, stripped out a little bloatware
- Crimson 16.10.3
- Claymore v 3.1 (-i 2 -dbg -1 -colors 0)

Results:
- Reported Hashrate: 335 sol/s (56 sol/s per card)
- Power: 610W

BIOS Settings
- GPU 1100 @ 900mV
- Mem 1900 @ 900mv with timings from 1500MHz
- Fan 3800RPM / 60%

Stable for a few hours with 47C card temps. Will retry with an i5 4690k and 8gb 2133 mhz ram tomorrow. Also tempted to try 16.11.x drivers.

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now. Test it for yourselves.

Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money! Really does give crypto a bad wrap.

BR
d57heinz

BlockChasers

newbie

Activity: 46

Merit: 0

My r9 290 tri-x wont get stable. After 20 mins it goes to 0H/s then the pc crashes after a bit. v3.1 I have dropped the speeds to 1000/1300 (stock) and upped the volt +75 and its still dying.

rednoW

legendary

Activity: 1510

Merit: 1003

As for the no Linux issue - I think the reason is he can't pack binary to defend it from disassembler under Linux so he stops...

gennadiv

full member

Activity: 139

Merit: 100

лyчшиe вapиaнты этo 2.1 и 3.1(лyчший)

Nthused

legendary

Activity: 1554

Merit: 1001

Quote from: Swimmer63 on November 09, 2016, 11:38:22 PM

Quote from: louiseth1 on November 09, 2016, 09:14:47 PM

I still can't understand why he won't release the linux version.

He's basically turning heads to the biggest miners out there, the large scale farmers.

Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

As a group they stuck their foot in their mouth by demonizing Claymore and his DevFee. Also a lot of talk about how it's only a good miner because he stole code, despite his explanation and amends. Now that his miner runs faster than SilentArmy, Genoil and the rest they are all complaining he won't issue a linux version. Can't have it both ways. He is concentrating on the Windows version as we have stuck with him.

This is why there is a "DevFee" for this miner so that the dev can afford to produce these increases for us average users Wink

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: louiseth1 on November 09, 2016, 09:14:47 PM

I still can't understand why he won't release the linux version.

He's basically turning heads to the biggest miners out there, the large scale farmers.

Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

As a group they stuck their foot in their mouth by demonizing Claymore and his DevFee. Also a lot of talk about how it's only a good miner because he stole code, despite his explanation and amends. Now that his miner runs faster than SilentArmy, Genoil and the rest they are all complaining he won't issue a linux version. Can't have it both ways. He is concentrating on the Windows version as we have stuck with him.

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: delle54 on November 09, 2016, 07:52:49 PM

Quote from: sakuleo on November 09, 2016, 07:42:17 PM

whit rx 470 uses 15.12 too? hoW? is this possible?

No. Use newer drivers.

I loaded 15.12 then put in the disk that came with the RX miners. But 15.12 had already recognized them on ASRock H81 Pro BTC.
You can also just run the newest driver. Claymore always uses 15.12, but for most the newest driver will work just as well.

CoinPro69

newbie

Activity: 58

Merit: 0

Quote from: mewhoyou on November 09, 2016, 10:48:18 PM

Quote from: CoinPro69 on November 09, 2016, 08:42:27 PM

Quote from: Minituning on November 09, 2016, 07:43:58 PM

Can you explain me your config ? I cant obtain more than 40 H/s on my 470 cards .

Wich parameters are you using , operating system , drivers?

I have memory timmings modified on my bios

Thanks in advice

No Problem, I help you with your Minituning Bro Grin

I have Win 10 Pro, 16 GB Ram, 6600K @ 4,2 Gh'z, latest AMD Driver 16.11.2 (4.November 2016) (16.11.3 is out, 9 Nov - will try that now)
470 Nitro 4GB, but it should work with other 470s 4gb as well.

Here is my unique tutorial how to speed up your 470 4GB to 60+ H/s - only for lovely people Cheesy

http://xup.in/dl,27875229

https://s12.postimg.org/ek0t8pgi5/470_4gb.jpg
Wink

DO NOT DOWNLOAD ... VIRUS

Are you nuts?
There is no virus lol! Shocked

I just did put the claymore package inside, that shows this:
https://virustotal.com/de/file/f3527b0f2839b4163cd5075f6132cfb71749f83ee48645958ec51cd7e6df2467/analysis/

However I repackaged it without the claymore miner, so it's clean now!
Here is the cleaned package: https://virustotal.com/de/file/1fb6d26a917d4810be57db6aa28a4c7064c26ab03679b400dfa81a6c85e41d34/analysis/1478750577/

Download Tutorial:
http://xup.in/dl,12078179

You can download all the exe files inside from other sources if you wish or don't trust, but you can check out those crc they are all original!
It's mostly about the tutorial!

gennadiv

full member

Activity: 139

Merit: 100

3.1 paбoтaeт лyчшe ZEC: 11/10/16-10:58:46 - New job from zec.coinmine.pl:7007
ZEC - Total Speed: 108.613 H/s, Total Shares: 605, Rejected: 0, Time: 01:5
ZEC: GPU0 34.012 H/s, GPU1 37.892 H/s, GPU2 36.709 H/s
в 3.0 был cбoй c пoдключeниeм
r9 380

bardacuda

sr. member

Activity: 430

Merit: 254

Quote from: elektrofreak on November 09, 2016, 09:57:08 PM

Quote from: bardacuda on November 09, 2016, 09:26:16 PM

Quote from: elektrofreak on November 09, 2016, 09:12:35 PM

Does anyone here know how to get past the opencl error 0 #101 issues? I'm running a pair of older 6970s, and with every version so far I've had these errors pop up, one for each gpu. Then the miner proceeds to sit there and do nothing at all, or BSOD my system.

Sure, you just need to solder some more RAM chips onto your card and you're good to go! Seriously though, it's time for a new card.

http://www.anandtech.com/show/4455/amds-graphics-core-next-preview-amd-architects-for-compute/3

Wow that was some really easy shit to say just now, yet that info was so very hard to find. So to be clear: ONLY GCN cards are supported. Got it! Thanks.. Cryptonight, I'm comin home baby :-D

Actually, he says it right in the OP and in the readme Cheesy

Quote from: Claymore on November 04, 2016, 10:47:34 AM

...
This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 2GB or more.
...

That said; I did see a post on the zcash forum I think where someone managed to get a 6990 working, but it was only giving him 2Sol/s, per chip. So it is possible to get 1GB cards working, but not worth it on anything pre-GCN. There is hope for 1GB 7850s (and maybe even 77XXs), but again...not supported.

mewhoyou

sr. member

Activity: 353

Merit: 250

Quote from: CoinPro69 on November 09, 2016, 08:42:27 PM

Quote from: Minituning on November 09, 2016, 07:43:58 PM

Can you explain me your config ? I cant obtain more than 40 H/s on my 470 cards .

Wich parameters are you using , operating system , drivers?

I have memory timmings modified on my bios

Thanks in advice

No Problem, I help you with your Minituning Bro Grin

I have Win 10 Pro, 16 GB Ram, 6600K @ 4,2 Gh'z, latest AMD Driver 16.11.2 (4.November 2016) (16.11.3 is out, 9 Nov - will try that now)
470 Nitro 4GB, but it should work with other 470s 4gb as well.

Here is my unique tutorial how to speed up your 470 4GB to 60+ H/s - only for lovely people Cheesy

http://xup.in/dl,27875229

DO NOT DOWNLOAD ... VIRUS

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: louiseth1 on November 09, 2016, 10:23:06 PM

Quote from: delle54 on November 09, 2016, 09:50:17 PM

Quote from: louiseth1 on November 09, 2016, 09:14:47 PM

I still can't understand why he won't release the linux version.

He's basically turning heads to the biggest miners out there, the large scale farmers.

Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

You don't seem to understand, that it takes time to complete/optimise one project, before starting the next one. WTF!

Huh.. He did release 1.1 in linux.

Usually when you have a solid source (and he does, and he already produced windows and linux binaries on previous releases) it is easy to compile for all platforms from the same source code. Are you sure you know what you are talking about?

Claymore said few times he will not do linux after 1.1. Read the tread.

louiseth1

legendary

Activity: 924

Merit: 1000

Bitfarms.io

Quote from: delle54 on November 09, 2016, 09:50:17 PM

Quote from: louiseth1 on November 09, 2016, 09:14:47 PM

I still can't understand why he won't release the linux version.

He's basically turning heads to the biggest miners out there, the large scale farmers.

Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

You don't seem to understand, that it takes time to complete/optimise one project, before starting the next one. WTF!

Huh.. He did release 1.1 in linux.

Usually when you have a solid source (and he does, and he already produced windows and linux binaries on previous releases) it is easy to compile for all platforms from the same source code. Are you sure you know what you are talking about?

elektrofreak

newbie

Activity: 33

Merit: 0

Quote from: bardacuda on November 09, 2016, 09:26:16 PM

Quote from: elektrofreak on November 09, 2016, 09:12:35 PM

Does anyone here know how to get past the opencl error 0 #101 issues? I'm running a pair of older 6970s, and with every version so far I've had these errors pop up, one for each gpu. Then the miner proceeds to sit there and do nothing at all, or BSOD my system.

Sure, you just need to solder some more RAM chips onto your card and you're good to go! Seriously though, it's time for a new card.

http://www.anandtech.com/show/4455/amds-graphics-core-next-preview-amd-architects-for-compute/3

Wow that was some really easy shit to say just now, yet that info was so very hard to find. So to be clear: ONLY GCN cards are supported. Got it! Thanks.. Cryptonight, I'm comin home baby :-D

arielbit

legendary

Activity: 3444

Merit: 1061

Quote from: adaseb on November 09, 2016, 07:48:09 PM

The cloud miners got screwed. People are BEGGING for refunds and some people are even THREATENING to sue under some "Buyers remorse" law.

Its nuts. Some dude paid 50 BTC for only 500Sol/s or so.

i didn't buy mining contract because..

1st i got gpus
2nd there are miner developers out there
3rd i have a gut feeling claymore will make a kickass miner Cool

delle54

sr. member

Activity: 307

Merit: 250

Quote from: louiseth1 on November 09, 2016, 09:14:47 PM

I still can't understand why he won't release the linux version.

He's basically turning heads to the biggest miners out there, the large scale farmers.

Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

You don't seem to understand, that it takes time to complete/optimise one project, before starting the next one. WTF!

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

oups well my weird 470 nitro just died, 3.0 killed it. Does not get detected now ah well, back to the RMA

funny how when you RMA something they send you back something almost as worse as what you gave them... :p

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 660. (Read 3839201 times)