Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 746.

Calivet

newbie

Activity: 44

Merit: 0

Quote from: adaseb on November 04, 2016, 02:55:38 PM

Quote from: Calivet on November 04, 2016, 02:53:03 PM

Quote from: adaseb on November 04, 2016, 02:30:03 PM

Quote from: Calivet on November 04, 2016, 02:08:59 PM

Quote from: adaseb on November 04, 2016, 01:50:03 PM

RX MODDED MEMORY STRAPS ====>>> http://www.dedoimedo.com/images/computers_years/2010_2/bsod-initiated.png

RX 470? RX 480? 4gb? 8gb?

470 4gb with 1900/2000 mhz

too much bro. Tune it down especially your memory. 1130 core / 1945 for my 470 4gb ref oc gets 40 plus sol

I mean 1200/1900 or 1200/2000 doesnt work

Will depend on the asic of your cards also. 1130/1900 will work fine.

FlexiN

newbie

Activity: 47

Merit: 0

Firstly, thank you and thank you again Mr. Claymore for your work

And i have a question someone can show me a .bat file for mining on sprnova pool Huh

Thank you.

teacherOk

newbie

Activity: 1

Merit: 0

On my r9 280x I have only 23H/s

My config file
-zpool stratum.zcash.nicehash.com:3357
-zwal t1T2xnz1Zfk2FFwXcmdMPtydUuQmBeP7BAd.worker1
-zpsw x

What am I doing wrong?

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: Calivet on November 04, 2016, 02:53:03 PM

Quote from: adaseb on November 04, 2016, 02:30:03 PM

Quote from: Calivet on November 04, 2016, 02:08:59 PM

Quote from: adaseb on November 04, 2016, 01:50:03 PM

RX MODDED MEMORY STRAPS ====>>>

RX 470? RX 480? 4gb? 8gb?

470 4gb with 1900/2000 mhz

too much bro. Tune it down especially your memory. 1130 core / 1945 for my 470 4gb ref oc gets 40 plus sol

I mean 1200/1900 or 1200/2000 doesnt work

Calivet

newbie

Activity: 44

Merit: 0

Quote from: jjiimm_64 on November 04, 2016, 02:43:06 PM

I just got nearly 5 times!!! upgraded from the nicehash's miner. I think I can get more if I upgrade the rest of the rigs' drivers.

THANK YOU claymore:

couple of things:

1. the monitor is still measuring and listing in ethers.
2. I had to set the : "-allpools" option is set. Miner was complaining about a non valid ether address or something..

-allpools 1

Calivet

newbie

Activity: 44

Merit: 0

Quote from: adaseb on November 04, 2016, 02:30:03 PM

Quote from: Calivet on November 04, 2016, 02:08:59 PM

Quote from: adaseb on November 04, 2016, 01:50:03 PM

RX MODDED MEMORY STRAPS ====>>> http://www.dedoimedo.com/images/computers_years/2010_2/bsod-initiated.png

RX 470? RX 480? 4gb? 8gb?

470 4gb with 1900/2000 mhz

too much bro. Tune it down especially your memory. 1130 core / 1945 for my 470 4gb ref oc gets 40 plus sol

kpierce77

legendary

Activity: 1540

Merit: 1002

So, the SOL rate I was getting with the miner from Coinsforall.io was 47 SOLS/s. With Caymore I'm getting 190 on Windows 10. Can't believe it! I have 3 RX480s and 2 RX470s. All I can do is tip my hat to you sir!

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: jjiimm_64 on November 04, 2016, 02:43:06 PM

1. the monitor is still measuring and listing in ethers.
2. I had to set the : "-allpools" option is set. Miner was complaining about a non valid ether address or something..

1. On "options" tab in EthMan you can select coin name and units (KH/s instead of MH/s).
2. If you mine on mininghub, suprnova or coinmine - it will be fixed in next update.

nanona

full member

Activity: 307

Merit: 101

50 Sol/s with R9 Nano on Win7 with 15.12. A rig of four pulls 580W at the wall. 80W of this is CPU etc. This makes it appr. 125W per card.

Genoil did 28 Sol/s per card at a total of 480W per rig of four. So 100W per card.

Hashrate +80%. Power draw +20%.

But I think I don't need to explain to anyone here why even if power draw would be up +80% Claymore would still be much more profitable than the slower Genoil miner.

Good work, Claymore!

jjiimm_64

legendary

Activity: 1876

Merit: 1000

I just got nearly 5 times!!! upgraded from the nicehash's miner. I think I can get more if I upgrade the rest of the rigs' drivers.

THANK YOU claymore:

couple of things:

1. the monitor is still measuring and listing in ethers.
2. I had to set the : "-allpools" option is set. Miner was complaining about a non valid ether address or something..

FlensGold

legendary

Activity: 1405

Merit: 1001

Great work, thank you very much!
I had so much issues recently with other mining software in combination with my Sapphire RX480 Nitro+ (4/8GB) GPUs, but this one almost doubled my hashrate AND did not crash yet (since 3h now).

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: Calivet on November 04, 2016, 02:08:59 PM

Quote from: adaseb on November 04, 2016, 01:50:03 PM

RX MODDED MEMORY STRAPS ====>>>

RX 470? RX 480? 4gb? 8gb?

470 4gb with 1900/2000 mhz

masaki1988

newbie

Activity: 5

Merit: 0

Quote from: rednoW on November 04, 2016, 01:51:02 PM

Quote from: masaki1988 on November 04, 2016, 01:47:32 PM

please add support bitcoin zcash pool at nicehash equihash.eu.nicehash.com:3357 . or tell me how to setup bat file for this pool. When i try set up this pool in bat file miner say there is no pools.

you are the army of one-post writers - please! read the opening post or read all thread before writing this shit! All questions are already answered!

im sorry im fool. i need set -allpools 1.

bobben2

full member

Activity: 279

Merit: 104

Strange packaging - zip in a zip file.
Stupid Win 8.1 got confused and did not allow me to extract the files. Had to unpack zip on a
Win 7 box then transfer unpacked files to my Win 8.1 test rig...

Slow dog 280X mining Eth at 15.5MH/s is now the fastest mining card I have mining ZCash at 45Sol/s. Yiiha
RX 470 at 39-43, but on Ubuntu/silentarmy.
Thanks for the miner Claymore!

eXtatiC

sr. member

Activity: 284

Merit: 250

An amazing work by Claymore. Thank you, dude!

markus124

hero member

Activity: 574

Merit: 500

For the people who are having problems with rejected works.....I was mining with my memory clock to the max (from 1250 to 1575) and i started to get alot of rejects after dev fee mining stopped and tried to reconect my miner to the pool. Then i reset to default and everything started to run good again. I'm using a 6x7950 rig. Check it out and tell us if ur rig became stable again.

Blazed

legendary

Activity: 2128

Merit: 1119

My 280X are getting 45 H/s each! Nice work Claymore. I made the switch about 10 minutes ago and got basically double the hash rate.

sunsofdust

full member

Activity: 151

Merit: 100

Quote

GOOGLE: https://drive.google.com/drive/folders/0B69wv2iqszefdmJickl5MF9BOEE?usp=sharing

Just a FYI, the Google Drive link has reach the max number of downloads.

The Mega link is still working :-)

MEGA: https://mega.nz/#F!P0ZjFDjC!Cmb-ZRqlbAnNrajRtp4zvA

celeronjb

newbie

Activity: 8

Merit: 0

Quote from: masaki1988 on November 04, 2016, 01:47:32 PM

please add support bitcoin zcash pool at nicehash equihash.eu.nicehash.com:3357 . or tell me how to setup bat file for this pool. When i try set up this pool in bat file miner say there is no pools.

add "-allpools 1"

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

An amazing piece of work. My 480's are doing 45-50 sol/s, and my total hashrate went up from 1300 sol/s to 1900 sol/s. Thank you, Claymore!

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 746. (Read 3839185 times)