Pages:
Author

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 97. (Read 3839203 times)

newbie
Activity: 31
Merit: 0
Is there an option to show power consumption of individual GPU?

Not in the software.
msi afterburner can. It can even log power consumption so you can have a log of it over x days for example.
hero member
Activity: 935
Merit: 1001
I don't always drink...
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
But it's need to improve stability.
Ive had zero problems with stability with the miner itself. The only time something goes wrong it's because of me (oc to much)

Keep up the good work claymore!
I tried stock frequinces on 270X and 280X. Same result - miner 12.4 unstable. I read this thread - most 280X on 12.4 unstable. This means that 12.4 need to improve stability.

I can confirm your findings with 280x, I reverted back to 12.0, now I can run at higher intensity, I don't have to use -r 60 to reset miners due to falling hashrates.  I tried the -old 1 but it didn't do it for me.
Try 12.2 - for me it gives more speed than 12.0 and stable.

Thanks, I concur.  About 2% faster, and so far, stable.
sr. member
Activity: 1484
Merit: 253
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
But it's need to improve stability.
Ive had zero problems with stability with the miner itself. The only time something goes wrong it's because of me (oc to much)

Keep up the good work claymore!
I tried stock frequinces on 270X and 280X. Same result - miner 12.4 unstable. I read this thread - most 280X on 12.4 unstable. This means that 12.4 need to improve stability.

I can confirm your findings with 280x, I reverted back to 12.0, now I can run at higher intensity, I don't have to use -r 60 to reset miners due to falling hashrates.  I tried the -old 1 but it didn't do it for me.
Try 12.2 - for me it gives more speed than 12.0 and stable.
hero member
Activity: 935
Merit: 1001
I don't always drink...
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
But it's need to improve stability.
Ive had zero problems with stability with the miner itself. The only time something goes wrong it's because of me (oc to much)

Keep up the good work claymore!
I tried stock frequinces on 270X and 280X. Same result - miner 12.4 unstable. I read this thread - most 280X on 12.4 unstable. This means that 12.4 need to improve stability.

I can confirm your findings with 280x, I reverted back to 12.0, now I can run at higher intensity, I don't have to use -r 60 to reset miners due to falling hashrates.  I tried the -old 1 but it didn't do it for me.
sr. member
Activity: 347
Merit: 255
Running rx480 here with 4 rigs and a few fury's all stock settings have not had any stability issues with these rigs running Claymore 12.4 previous releases were stable for me also with rigs needing no management,hope this info helps
sr. member
Activity: 1484
Merit: 253
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
But it's need to improve stability.
Ive had zero problems with stability with the miner itself. The only time something goes wrong it's because of me (oc to much)

Keep up the good work claymore!
I tried stock frequinces on 270X and 280X. Same result - miner 12.4 unstable. I read this thread - most 280X on 12.4 unstable. This means that 12.4 need to improve stability.
sr. member
Activity: 504
Merit: 250
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
But it's need to improve stability.
Ive had zero problems with stability with the miner itself. The only time something goes wrong it's because of me (oc to much)

Keep up the good work claymore!
sr. member
Activity: 1484
Merit: 253
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
But it's need to improve stability.
newbie
Activity: 31
Merit: 0
Is Claymore planning a new release guys?

The miner is already very fast. Difficult to improve speed any more.
newbie
Activity: 68
Merit: 0
Is Claymore planning a new release guys?
member
Activity: 77
Merit: 10
I just posted a new mining rig build howto. This one for RX470's and Ethosdistro running Claymore miner. All the steps, from ordering, to setting up BIOS, to configuring Claymore on EthosDistro:

https://blockoperations.com/gpu-mining-zcash-ethereum-ethosdistro-amd-rx470/
newbie
Activity: 24
Merit: 0
Out of interest, how stable are your claymore miners?

I have ran mine for 16 days straight without restarting - would it be an idea to restart my rig or just let it be?

Rig consists of 6 x RX480
sr. member
Activity: 1484
Merit: 253
I tried on Tahiti and Pitcarin cards miner versions 12.3 and 12.4. Speed is 2-3% more on 12.4, but 12.3 and 12.4 not stable neither lowing intansity not using an "-old 1" option. Different versions of drivers not stabilize 12.3 and 12.4 miners too.
Version 12.2 is the most stable version for GCN1 cards with any intansity or drivers, but slower than 12.4 version.

Claymore, would you make a new version with speed of 12.4 and stability of 12.2?

I think you can reduce the speed of the GPU.
If I do that speed became less than without reducing OC in 12.2.
newbie
Activity: 22
Merit: 0
I tried on Tahiti and Pitcarin cards miner versions 12.3 and 12.4. Speed is 2-3% more on 12.4, but 12.3 and 12.4 not stable neither lowing intansity not using an "-old 1" option. Different versions of drivers not stabilize 12.3 and 12.4 miners too.
Version 12.2 is the most stable version for GCN1 cards with any intansity or drivers, but slower than 12.4 version.

Claymore, would you make a new version with speed of 12.4 and stability of 12.2?

I think you can reduce the speed of the GPU.
rpg
hero member
Activity: 728
Merit: 500
Guys, do you want ZEC to rise? If you do, why you put 40-50-60 btc sell walls on poloniex during pumps? Do you really think that your lazy trading will bring you profit? Place small bids several times during the pump if you are so eager to sell at that price. Thank you!

Doubtful it is the miners, as most who are going to sell, sell small amounts daily and not accumulate 40-60 BCT worth of ZEC to just to place a sell wall as you describe a few pennies higher than the market rate. Much more likely the action of speculators and/or whales trying to manipulate the price.

So is there a way for miners to help raise ZEC?

If Zec makes 5-6% there is every chance  the pump will gain speed and reach 20-50 and even 100%. It is a pity that all pumps ended too early because of 1-2 noobs that put sell walls. The moment they put 20 and more btc the pump stops, because the traders see that there is no way this wall will be eaten provided that the 24hr volume is so small and the usual trades are around 1-2 btc max. Of course the bid will never be filled so the noob gets no profit at all but he damages the profits of the whole community.



sometimes the walls are put up by traders to scare noobs into selling :-) That's a very common technique market makers do all the time on wall street. They do both fake sells and fake buys depending on where they want the market to go
legendary
Activity: 1891
Merit: 3096
All good things to those who wait
Guys, do you want ZEC to rise? If you do, why you put 40-50-60 btc sell walls on poloniex during pumps? Do you really think that your lazy trading will bring you profit? Place small bids several times during the pump if you are so eager to sell at that price. Thank you!

Doubtful it is the miners, as most who are going to sell, sell small amounts daily and not accumulate 40-60 BCT worth of ZEC to just to place a sell wall as you describe a few pennies higher than the market rate. Much more likely the action of speculators and/or whales trying to manipulate the price.

So is there a way for miners to help raise ZEC?

If Zec makes 5-6% there is every chance  the pump will gain speed and reach 20-50 and even 100%. It is a pity that all pumps ended too early because of 1-2 noobs that put sell walls. The moment they put 20 and more btc the pump stops, because the traders see that there is no way this wall will be eaten provided that the 24hr volume is so small and the usual trades are around 1-2 btc max. Of course the bid will never be filled so the noob gets no profit at all but he damages the profits of the whole community.

sr. member
Activity: 504
Merit: 250
My rigg is getting near completion Cheesy

One 7990 and one R9 280, dual PSUs and a slight OC on the R9-card makes me reach 780 sols/s. I have to keep temps safe too (below 70c). Will probably be able to reach 800 sols/s when my PCI-e riser arives. Then I can put my 7990 card on the side and OC some more Smiley

I love hobby-mining Smiley
newbie
Activity: 18
Merit: 0
will a 600W PSU be enough for a Kaby Lake rig running 2 x RX480 (Sapphire Nitro 8GB)?  

A Kaby Lake CPU has a TDP between 4.5W and 91W, so not much information in here.

But never mind, for 2x480 a 600W PSU should be a good choice. Not very high costs, proper reserves and good load point for high efficiency during normal operation.


Thanks.  CPU is a core i7 7700.  Good to know re: PSU.
sr. member
Activity: 1484
Merit: 253
I tried on Tahiti and Pitcarin cards miner versions 12.3 and 12.4. Speed is 2-3% more on 12.4, but 12.3 and 12.4 not stable neither lowing intansity not using an "-old 1" option. Different versions of drivers not stabilize 12.3 and 12.4 miners too.
Version 12.2 is the most stable version for GCN1 cards with any intansity or drivers, but slower than 12.4 version.

Claymore, would you make a new version with speed of 12.4 and stability of 12.2?
newbie
Activity: 45
Merit: 0
Guys, do you want ZEC to rise? If you do, why you put 40-50-60 btc sell walls on poloniex during pumps? Do you really think that your lazy trading will bring you profit? Place small bids several times during the pump if you are so eager to sell at that price. Thank you!

Doubtful it is the miners, as most who are going to sell, sell small amounts daily and not accumulate 40-60 BCT worth of ZEC to just to place a sell wall as you describe a few pennies higher than the market rate. Much more likely the action of speculators and/or whales trying to manipulate the price.

So is there a way for miners to help raise ZEC?
Pages:
Jump to: