Pages:
Author

Topic: [CLOSED]Minion Chip Assembly GB - page 15. (Read 77535 times)

sr. member
Activity: 504
Merit: 250
September 21, 2014, 01:29:46 PM
eu-stratum.btcguild.com:3333
stratum.btcguild.com:3333
is what i used with out issue for them.
sr. member
Activity: 504
Merit: 250
September 21, 2014, 01:27:47 PM
check your pool settings they may be wrong
what pool address you using
sr. member
Activity: 504
Merit: 250
September 21, 2014, 12:18:03 PM
no problem just type the whole thing and let me know if need be I can skype with you to help.
sr. member
Activity: 504
Merit: 250
September 21, 2014, 12:09:13 PM
sorry for repeating my self are you typing the whole thing "screen -r"

also double check all the pool settings sounds like you have made a mistake on the cgminer page.
sr. member
Activity: 504
Merit: 250
September 21, 2014, 12:03:55 PM
are you typing screen -r try also screen -d
but if you have a blinking orange light under each cooler your hashing
sr. member
Activity: 504
Merit: 250
September 21, 2014, 11:53:42 AM
log to putty and type this excatly
/usr/bin/fix_rc
then when it finish's rebooting try loggin in to putty then try screen -r
sr. member
Activity: 504
Merit: 250
September 21, 2014, 11:03:02 AM
Don't you hate smug shits Smiley

How you going kingcolex hit me up and I'll help as much as I can chap and the same for any one else Smiley
full member
Activity: 238
Merit: 106
September 21, 2014, 10:18:52 AM
the wifi link i believe is disabled by the technobit firmware.

Thanks, time to drill some holes in my walls for ethernet cables...
sr. member
Activity: 504
Merit: 250
September 21, 2014, 09:51:46 AM
on the new update a couple of boxes was unfilled and that stopped mine working.
sr. member
Activity: 504
Merit: 250
September 21, 2014, 09:16:42 AM
the cpu fans should spin as soon as the psu powers up.
did you fill all boxes on the hexaminer page on the tplink and the tplink has to have a ip address on the same range as your net work ie  if your router is 192.168.0.1 then tplink should be 192.168.0.99
Qeu
full member
Activity: 120
Merit: 100
September 21, 2014, 09:16:19 AM
Well Marto, I see you are online, why no comments on the out of order shipping, how can you ship batch 2 orders from 3 weeks old? What have you shipped so far, from MS' pictures it looks not even 25 to the USA?

Because he need to set up his own farm and cloud hashing first to recoup from the losses of buying ALOT of parts to manufacture the boards?
Martin got paid in chips, remember?  Roll Eyes

 BULLSHIT. I paid in full. No conversion, no who's in inline shit. I paid straight up for 50. Got the PSU's, breaker boards, fans, all that. Converted half my breaker box to 240... and still nothing. 4 weeks my ass.

I should have had 50 boards here, yet difficulty is up another 20% yet again.

 Marto... please, and I beg you deliver. Timeline for this venture is running out. Sad
In fact our project is delayed too  until we finish this GB.
We are sending as much miners are ready.
And for the payment.
Only 2 orders are paid one fiat and one btc
Majority of 90+ percent paid with chips
So the only ones not paying with chips are Scrappy Do and me. Now can you answer why you are shipping 3 week old batch 2 orders before over 2 month old batch 1 orders instead of ignoring this?
Is it about time for a Customers Only: Technobit Fucks Us Over thread?
hero member
Activity: 728
Merit: 500
September 21, 2014, 06:54:16 AM
the wifi is disabled so you need wired network.
also do not turn dhcp on
sr. member
Activity: 504
Merit: 250
September 21, 2014, 06:47:50 AM
the wifi link i believe is disabled by the technobit firmware.
full member
Activity: 238
Merit: 106
September 21, 2014, 06:46:16 AM
Kingcolex

You connect tplink to router
powered usb hub to tplink
miner to usb hub

only time you need to connect tplink to pc is when you flash the custom firmware.

Just to clarify:
When mining, does tplink need ethernet cable to connect to router? Or can it use the WIFI link?
sr. member
Activity: 504
Merit: 250
September 21, 2014, 06:09:50 AM
Kingcolex

You connect tplink to router
powered usb hub to tplink
miner to usb hub

only time you need to connect tplink to pc is when you flash the custom firmware.
hero member
Activity: 728
Merit: 500
September 21, 2014, 12:54:43 AM
There is a goof guide by zich on the hardware section anyway what you have to do with brand new TP-link with factory firmware:
1. connect it to the lan port of PC
2. Go to 192.168.0.254 flash it with technobit factory... image.
3. Go to 192.168.0.99 enter your pool data, and setup boxes for the miner. In the network tab edit the IP, gateway , and DNS.
4. Conect the board to TP-link and TP-link to your LAN, connect the Power 12 V PCI-e to the board
If everything is OK the leds on the board are blinking
hero member
Activity: 728
Merit: 500
September 20, 2014, 02:10:18 AM
Well Marto, I see you are online, why no comments on the out of order shipping, how can you ship batch 2 orders from 3 weeks old? What have you shipped so far, from MS' pictures it looks not even 25 to the USA?

Because he need to set up his own farm and cloud hashing first to recoup from the losses of buying ALOT of parts to manufacture the boards?
Martin got paid in chips, remember?  Roll Eyes

 BULLSHIT. I paid in full. No conversion, no who's in inline shit. I paid straight up for 50. Got the PSU's, breaker boards, fans, all that. Converted half my breaker box to 240... and still nothing. 4 weeks my ass.

I should have had 50 boards here, yet difficulty is up another 20% yet again.

 Marto... please, and I beg you deliver. Timeline for this venture is running out. Sad
In fact our project is delayed too  until we finish this GB.
We are sending as much miners are ready.
And for the payment.
Only 2 orders are paid one fiat and one btc
Majority of 90+ percent paid with chips
hero member
Activity: 686
Merit: 500
September 20, 2014, 12:52:51 AM
Well Marto, I see you are online, why no comments on the out of order shipping, how can you ship batch 2 orders from 3 weeks old? What have you shipped so far, from MS' pictures it looks not even 25 to the USA?

Because he need to set up his own farm and cloud hashing first to recoup from the losses of buying ALOT of parts to manufacture the boards?
Martin got paid in chips, remember?  Roll Eyes

 BULLSHIT. I paid in full. No conversion, no who's in inline shit. I paid straight up for 50. Got the PSU's, breaker boards, fans, all that. Converted half my breaker box to 240... and still nothing. 4 weeks my ass.

I should have had 50 boards here, yet difficulty is up another 20% yet again.

 Marto... please, and I beg you deliver. Timeline for this venture is running out. Sad
Qeu
full member
Activity: 120
Merit: 100
September 19, 2014, 07:48:50 PM
I have mine in hand, but before i start installing the cpu coolers, how much thermal paste is recommended?
Minimal, just put on enough so that when it covers the chip, you are just past transparancy and can't see the chip shining through.
Qeu
full member
Activity: 120
Merit: 100
September 19, 2014, 07:14:51 PM
Well Marto, I see you are online, why no comments on the out of order shipping, how can you ship batch 2 orders from 3 weeks old? What have you shipped so far, from MS' pictures it looks not even 25 to the USA?

22 boards to be exact
Wow, thanks for that. Mindbogling, more and more.......
Pages:
Jump to: