Pages:
Author

Topic: [CLOSED]Minion Chip Assembly GB - page 19. (Read 77573 times)

sr. member
Activity: 374
Merit: 250
September 15, 2014, 12:57:07 PM
Martin,

Is it possible to send my batch 1 and batch 2 group nuy orders at the same time without delaying the shipment? my B2 order is only 1 board.
hero member
Activity: 728
Merit: 500
September 15, 2014, 12:48:34 PM
actualy they are 80mm pitch
We have only one model here localy that we bought and was diferent - it is some evercool.
Anyway with all this troubles with production this is the easy one.
If you pre-bought quontity or have one of a choise , just give the model and I'll adopt it.
best solution from my point of view .
We got arctic freezer 7 from the beginning 3 months back and design it with it.
Honestly never cross checked with other vendors coolers .
Board redesign is not doable solution now.
So we'll produce for you any adapter you will need for free.
My non-bitcoin job is mechanical design and tooling production so it is easy part for me
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
September 15, 2014, 12:47:49 PM
Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.
No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top"

and

"All Arctic intel coolers"

We have tried several zalman and intel stock coolers, not a single one works.
height?
Give me the exact model you choose and I'll will get one localy and make adapter for you

Its not the height. The mounting points for the heatsinks are way off. Why are the 4 mounting holes around the ASIC not just standard placement 1150 holes?

Neither
http://www.newegg.com/Product/Product.aspx?Item=N82E16835203019&nm_mc=KNC-GoogleAdwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-CPU+Fans+%26+Heatsinks-_-N82E16835203019&gclid=CjwKEAjwnNqgBRDdgOitrZPj6yYSJACM86tDKWiJNVeJNfxJaFlmdyhgT4GU304-cUyk5Hm5uMef4RoCEvnw_wcB
Nor
http://www.newegg.com/Product/Product.aspx?Item=N82E16835118128&cm_re=cnps5x-_-35-118-128-_-Product

Work as tested so far
hero member
Activity: 728
Merit: 500
September 15, 2014, 12:45:28 PM
Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.
No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top"

and

"All Arctic intel coolers"

We have tried several zalman and intel stock coolers, not a single one works.
height?
Give me the exact model you choose and I'll will get one localy and make adapter for you
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
September 15, 2014, 12:43:40 PM
Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.
No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top"

and

"All Arctic intel coolers"

We have tried several zalman and intel stock coolers, not a single one works.
hero member
Activity: 728
Merit: 500
September 15, 2014, 12:42:25 PM
Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.
No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some mistakes and troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height
sr. member
Activity: 504
Merit: 250
September 15, 2014, 12:32:04 PM
Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.
full member
Activity: 221
Merit: 100
September 15, 2014, 12:28:14 PM


Problem though.
Although the board advertises that it will work with all intel 1150 coolers, it does not. We have tried several coolers so far, and none fit into the mounting holes on the board, or the weird metal brackets included.

bobsag/Matt:

Have you tried the arctic 7s that marto sells on his website?  Does anything fit on those boards?

What is the total % of boards that you have?

Marto:  

Why haven't you sent the list yet?  How much work does it take?  We have been waiting 6-7 weeks beyond what is promised by you... to be held up on this easily sent thing is really, really frustrating.
sr. member
Activity: 504
Merit: 250
September 15, 2014, 12:09:11 PM
Not to be a arse but that is not the same configuration as the board I got I have none of those funny cooler mounts.
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
September 15, 2014, 12:06:31 PM
Heres some pics of what we got:





Problem though.
Although the board advertises that it will work with all intel 1150 coolers, it does not. We have tried several coolers so far, and none fit into the mounting holes on the board, or the weird metal brackets included.
newbie
Activity: 18
Merit: 0
September 14, 2014, 10:27:49 PM
We have not received the list from Marto yet.

Marto- Can we please get this list sent to Minersource so that shipping can continue?
hero member
Activity: 546
Merit: 500
Owner, Minersource.net
September 14, 2014, 10:14:27 PM
We have not received the list from Marto yet.
newbie
Activity: 18
Merit: 0
September 14, 2014, 09:37:24 PM
Surely by now we should have a list of whose boards were sent to MS for batch 1.  Can we get an update?  Pictures?  Shipping update?
I'm in batch 1 (boards sent to MS) and my order on Technobit still says 'Payment Accepted' and I haven't heard from anyone regarding shipping yet.
Also, Bobsag3, you mentioned towards the beginning of this group buy that we'd be refunded for the extra blackarrow PSU's that we bought for our compensation units.  Can we please get some details on how that's going to work?
full member
Activity: 221
Merit: 100
September 14, 2014, 12:47:12 AM
Have we figured out how many boards were in the shipment to MS?  Have we figured out who these boards belong to?
sr. member
Activity: 407
Merit: 255
September 12, 2014, 06:48:21 PM
@Marto: I paid over €4000 at the €-BTC rate of 07-17-2014. If I opt for a refund, will I get the equivalent of the € price in BTC at the €-BTC rate on the date of the refund, or at the date of paying (as in: the same BTC number as paid on 07-17)?

@Bobsag3, since the 07-22-2014 message I would be sent a check, no word has reached me through your broken Zen system, I had a reply by pm from Thomas my tickets and even your emails (minersource's) never came in or went out, and a fair number of checks did not reach their destinations. I asked to be updated on what is next for my case, but nothing since. What should I do next to get this moving?
Bump
We started to ship and problem solved even with hand replacement of MCU's
Your order is for EU so will be out tomorrow or in Monday.
As far all the boards are produced for the assembly service batch1 no refunds will be available for now.
second sending for minersource is out today/tomorrow too

 Marto.. Please go back to page 2 as I was one of the first to request your service and paid you in full conversion (no chip exchange) for 200 chips. I am seeing people with orders WAY after mine posting pics of machines in hand. Something is not right. Now you talk of MS second shipment. I do not get it at all man. Why have you not shipped my order?

He did not say second batch. What I think he said means is that a second shipment for minersource has been sent. So this could be second shipment of first batch?
hero member
Activity: 686
Merit: 500
September 12, 2014, 06:32:02 PM
@Marto: I paid over €4000 at the €-BTC rate of 07-17-2014. If I opt for a refund, will I get the equivalent of the € price in BTC at the €-BTC rate on the date of the refund, or at the date of paying (as in: the same BTC number as paid on 07-17)?

@Bobsag3, since the 07-22-2014 message I would be sent a check, no word has reached me through your broken Zen system, I had a reply by pm from Thomas my tickets and even your emails (minersource's) never came in or went out, and a fair number of checks did not reach their destinations. I asked to be updated on what is next for my case, but nothing since. What should I do next to get this moving?
Bump
We started to ship and problem solved even with hand replacement of MCU's
Your order is for EU so will be out tomorrow or in Monday.
As far all the boards are produced for the assembly service batch1 no refunds will be available for now.
second sending for minersource is out today/tomorrow too

 Marto.. Please go back to page 2 as I was one of the first to request your service and paid you in full conversion (no chip exchange) for 200 chips. I am seeing people with orders WAY after mine posting pics of machines in hand. Something is not right. Now you talk of MS second shipment. I do not get it at all man. Why have you not shipped my order?
hero member
Activity: 686
Merit: 500
September 12, 2014, 06:20:52 PM
@Marto: I paid over €4000 at the €-BTC rate of 07-17-2014. If I opt for a refund, will I get the equivalent of the € price in BTC at the €-BTC rate on the date of the refund, or at the date of paying (as in: the same BTC number as paid on 07-17)?

@Bobsag3, since the 07-22-2014 message I would be sent a check, no word has reached me through your broken Zen system, I had a reply by pm from Thomas my tickets and even your emails (minersource's) never came in or went out, and a fair number of checks did not reach their destinations. I asked to be updated on what is next for my case, but nothing since. What should I do next to get this moving?
Bump
We started to ship and problem solved even with hand replacement of MCU's
Your order is for EU so will be out tomorrow or in Monday.
As far all the boards are produced for the assembly service batch1 no refunds will be available for now.
second sending for minersource is out today/tomorrow too

 Marto, I was in the very first chip shipment you received from them.. How are you shipping their second order when mine as of yet has not shipped? Please help me understand.
hero member
Activity: 728
Merit: 500
September 12, 2014, 05:15:36 PM
Martin.

My batch 2 chips are still costumers awaiting your aproval. .
Up
As I said earlier.
Chips recei ed
sr. member
Activity: 374
Merit: 250
September 12, 2014, 03:46:13 PM
Martin.

My batch 2 chips are still costumers awaiting your aproval. .
Up
hero member
Activity: 728
Merit: 500
September 12, 2014, 11:34:51 AM
First batch of boards received, waiting on the list of whos who from Marto, will post pics and hopefully? reship tomorrow.
sorry for the delay on this.
will try to sort it tonight
Pages:
Jump to: