Topic: [CLOSED]Minion Chip Assembly GB - page 54. (Read 77573 times)
Oh my god so funny I may stop laughing next week, But as I did my order through Minersource will I get a email.
LOL i got an email from BA today confiming / asking the chip conversion..
Dear customer,
We have receive a request to send ##ASICs to Bulgaria in exchange of your order of ## Prospero X1. Please confirm that you do not want to receive anymore the X1 unit but you wish us to send instead ## ASICs. Also please specify the address where you want the ASICs to be sent.
We need your confirmation for the above in order to be able to apply the required changes.
There is still ## Prospero X1 to be shipped to you with full options. We should receive LCDs this week and the remaining miner should be delivered to you next week.
Thank you for your understanding!
Regards,
Black Arrow Team
LOL even in this mail they are speaking of NEXT WEEK
Dear customer,
We have receive a request to send ##ASICs to Bulgaria in exchange of your order of ## Prospero X1. Please confirm that you do not want to receive anymore the X1 unit but you wish us to send instead ## ASICs. Also please specify the address where you want the ASICs to be sent.
We need your confirmation for the above in order to be able to apply the required changes.
There is still ## Prospero X1 to be shipped to you with full options. We should receive LCDs this week and the remaining miner should be delivered to you next week.
Thank you for your understanding!
Regards,
Black Arrow Team
LOL even in this mail they are speaking of NEXT WEEK
Marto,
are you starting production this week? you got a lot of orders?
I guess so, i think a lot of ppl want to get out from BA (i for sure did).
are you starting production this week? you got a lot of orders?
I guess so, i think a lot of ppl want to get out from BA (i for sure did).
But potentially it could do 480 marto
Has one else seen the change on the technobit website? It was 480GH/S a few days ago, now it's at 400GH/S.
http://technobit.eu/index.php?id_product=79&controller=product&id_lang=1
It was never 480 for sure http://technobit.eu/index.php?id_product=79&controller=product&id_lang=1
480 was most likely over clocked the minion was stock 100 and 120 over clocked.
Has one else seen the change on the technobit website? It was 480GH/S a few days ago, now it's at 400GH/S.
http://technobit.eu/index.php?id_product=79&controller=product&id_lang=1
http://technobit.eu/index.php?id_product=79&controller=product&id_lang=1
Is the cooler mount the same as a LGA775? Anyone found a good bulk deal for coolers?
chips have already been transfered directly from BA to Marto ! you don't read anything that happens or what and with regard to informations about boards heatsink Marto has already make the effort to post pictures.. just stay tuned if ur really concerned
The OP mentions under 3. That all chips will go to minersource first, then from the USA to Bulgaria. The pictures you saw are not showing the base heatsink/fan that are mentioned in the product description at Technobit.eu, but the optional top heatsink/fan. 
chips have already been transfered directly from BA to Marto ! you don't read anything that happens or what and with regard to informations about boards heatsink Marto has already make the effort to post pictures.. just stay tuned if ur really concerned
Now that I have a discount code, where to apply it, I am stuck at technobit asking for shipping carrier and tracking #, and I can't find the boards/group buy at minersource?
IF you are part of this GBJust ask minersource for
discount code and tracking NO for the chips
Marto, do you have a pic of the base heatsink/fan that comes with the boards?
Now that I have a discount code, where to apply it, I am stuck at technobit asking for shipping carrier and tracking #, and I can't find the boards/group buy at minersource?
IF you are part of this GBJust ask minersource for
discount code and tracking NO for the chips
Now that I have a discount code, where to apply it, I am stuck at technobit asking for shipping carrier and tracking #, and I can't find the boards/group buy at minersource?
Bobsag3 when you get you samples can you let us know the board dimensions.
Don't have any dimensions for them yet have asked.
With kids around boxing is my only option got a 2 year old son who love my screw drivers 
that cooler can shift 95w and I have kids but with some extra fans blowing in from the front and fans exhausting and a decent amount of gap between the board and back I believe that stock intel cooler will be more than enough for my needs 
plus will allow for a clean loolk.
plus will allow for a clean loolk.kids
... yeah box it!The extra fans to force cool the whole box sounds like a good idea.
that cooler can shift 95w and I have kids but with some extra fans blowing in from the front and fans exhausting and a decent amount of gap between the board and back I believe that stock intel cooler will be more than enough for my needs plus will allow for a clean loolk.
plus will allow for a clean loolk. Hey guys,
What do you think of this cooler, will it be able to shift enough heat?
Notice it only has 2 heat pipes:
CLICK FOR IMAGE
What do you think of this cooler, will it be able to shift enough heat?
Notice it only has 2 heat pipes:
CLICK FOR IMAGE
Looks good don't worry about the 2 heatpipes cause the chip itself is very small.
Thanks, OK I will probably use some. But to dissipate 100W and keep the die "cool" takes a lot of cooler.
I may have to underclock on hot days
, but can probably run 400 GH/s per board in the winter maybe, cheap electric heater even if it's not turning profit I'm thinking these so as I can mount the board horizontal in a old pc chassis with all the bays removed.
http://click.intel.com/internal-thermal-solutions.html
http://click.intel.com/internal-thermal-solutions.html
I don't think it could shift 100W, you may have to run underclocked with that cooler.
Boxing it up would be required in a busy lived in environment, especially with cats/kids etc.
But it's better to leave it as open board in a safe unlived in area. Especially because TechnoBit board has a giant aluminium heatsink on its base, you want good clean airflow around that.
I have a small spare room with a window and I'm going to rack the 12 boards up on shelf rails, the shelfs wont be like book shelves, they will not have a solid board base, they will be pairs of horizontal rails onto which the boards are fastened for better air circulation.
Jump to: