I think the masternode started but it is not showing on the list.
I checked the masternode with the debug command and it shows "Masternode started remotely".
Also the masternode explorer shows it as active but nothing generated.
I have the ports configured correctly, but it keeps going offline.
I am also using the lastest wallets, the VPS I am running has 1gb in memory maybe I need more memory?
It seems to go offline as soon as it stakes some coins.
Topic: CRAVE: Revival - page 25. (Read 54978 times)
I first just want to say that Cryptopia has a great support team. Fast, responsive, informative, and easy to work with.
Anyways, here is the response regarding the 200 needed confirmations:
"We have increased the confirmations required for various low hashrate coins (including DOT) due to a growing number of coins experiencing 51% attacks to the network, which is then causing users on Cryptopia to lose their coins. We investigated each coins network one by one and changed confirmations where applicable based on the stability of the coins network.
We understand this may seem like an extreme reaction, however we believe our Users would prefer that deposits take a while longer if it means protecting their investment.
Any questions please don't hesitate to get in touch."
Hopefully this clears some things up.
Anyways, here is the response regarding the 200 needed confirmations:
"We have increased the confirmations required for various low hashrate coins (including DOT) due to a growing number of coins experiencing 51% attacks to the network, which is then causing users on Cryptopia to lose their coins. We investigated each coins network one by one and changed confirmations where applicable based on the stability of the coins network.
We understand this may seem like an extreme reaction, however we believe our Users would prefer that deposits take a while longer if it means protecting their investment.
Any questions please don't hesitate to get in touch."
Hopefully this clears some things up.
Cannot allocate vin means you need to unlock your wallet and unlock again. Then the unlock will work. The stopping problem could be a lack of memory (1Gb+ is ok) or a software problem. If you have lots of memory can you run a "getinfo" command on the debug console and post the response?
I will try what you said by unlocking and unlocking it again...I currently have 8GB ram running and awaiting for another 16GB stick to install to total 24GB.
here's the "getinfo" response:
"version" : "v2.1.0.0-60025",
"protocolversion" : 60025,
"walletversion" : 60000,
"balance" : 500.70522766,
"darksend_balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 806949,
"timeoffset" : 2,
"moneysupply" : 1321224.00000000,
"connections" : 49,
"proxy" : "",
"ip" : "x0.xx.xx.x85",
"difficulty" : 14198.30396636,
"testnet" : false,
"keypoololdest" : 1500864190,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
I'm seeing if I can get more information regarding this.
Ok cool, has someone filled in the Bittrex application form recently as well? Maybe with CooleRRSA at the helm it will get more traction there?
Thanks
exchange, same thing with polo if ever we really intended to bring this coin to its new hype, bittrex and polo will bring big for the success.
This is great news, let us know if we can help in any way
Cannot allocate vin means you need to unlock your wallet and unlock again. Then the unlock will work. The stopping problem could be a lack of memory (1Gb+ is ok) or a software problem. If you have lots of memory can you run a "getinfo" command on the debug console and post the response?
so i check on my masternode to see if its running in "My Masternode Tab" the status is changed to "not in the masternode list" I clicked update and nothing happens. I click start and this message shows up "failed to start masternode. error. could not allocate vin" okay fine.
I go into debug window to see my masternode status and this comes up:
"vin" : "CTxIn(COutPoint(0000000000, 4xxxxxxx295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "CxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxqmzsT",
"notCapableReason" : ""
I list it out to see if i find my masternode and at what status its at. I cannot find it....
So i unlocked my wallet (without staking enable) and start my masternode to see if it runs and it does stating "masternode is running"
okay fine but when i checked back 10-30mins later it reverts back to the beginning and not running....do i have to always check back and unlock it every few minutes for it to run? how do you keep it running 24/7?? i must be doing something wrong here..this is frustrating...and anyone has this problem?
I go into debug window to see my masternode status and this comes up:
"vin" : "CTxIn(COutPoint(0000000000, 4xxxxxxx295), coinbase )",
"service" : "[::]:0",
"status" : 0,
"pubKeyMasternode" : "CxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxqmzsT",
"notCapableReason" : ""
I list it out to see if i find my masternode and at what status its at. I cannot find it....
So i unlocked my wallet (without staking enable) and start my masternode to see if it runs and it does stating "masternode is running"
okay fine but when i checked back 10-30mins later it reverts back to the beginning and not running....do i have to always check back and unlock it every few minutes for it to run? how do you keep it running 24/7?? i must be doing something wrong here..this is frustrating...and anyone has this problem?
I'm seeing if I can get more information regarding this.
Ok cool, has someone filled in the Bittrex application form recently as well? Maybe with CooleRRSA at the helm it will get more traction there?
Thanks
exchange, same thing with polo if ever we really intended to bring this coin to its new hype, bittrex and polo will bring big for the success.
I'm seeing if I can get more information regarding this.
Ok cool, has someone filled in the Bittrex application form recently as well? Maybe with CooleRRSA at the helm it will get more traction there?
Thanks
exchange, same thing with polo if ever we really intended to bring this coin to its new hype, bittrex and polo will bring big for the success.
Do I have to start startmn1.cmd file first then start crave-mn1.exe (controller wallet) for it to work?
The 'startmn1.cmd' will start up the mn wallet. That should be running when you go to start your nodes through the controller wallet. You can open the controller first, it doesn't matter, but run the mn wallets before startingThanks for the clarification
I'm seeing if I can get more information regarding this.
Ok cool, has someone filled in the Bittrex application form recently as well? Maybe with CooleRRSA at the helm it will get more traction there?
Thanks
Do I have to start startmn1.cmd file first then start crave-mn1.exe (controller wallet) for it to work?
The 'startmn1.cmd' will start up the mn wallet. That should be running when you go to start your nodes through the controller wallet. You can open the controller first, it doesn't matter, but run the mn wallets before starting I'm seeing if I can get more information regarding this.
Ok cool, has someone filled in the Bittrex application form recently as well? Maybe with CooleRRSA at the helm it will get more traction there?
Thanks
Do I have to start startmn1.cmd file first then start crave-mn1.exe (controller wallet) for it to work?
I'm seeing if I can get more information regarding this.
I think that gets lowered after a few trades, I had that happen when I moved some PIVX on there. The first time I had to wait for 200 confirms, the 2nd time only 20 confirms. Have you only just signed up?
I have been on cryptopia for about 6 months, have done some trades there cashed out and deposited many times, buy only crave asking 200 confirmations, other coins are 6 or 2.
You're right, I've never tried to sell any Crave
I've just deposited a few and yes, 200 confs.. Interestingly in my deposit history the PIVX TX I had to wait 200 for now has /20 next to it. So maybe they don't trust the Crave coin as much, and have only started trusting PIVX more recently?200 confirmations take about 6/8hrs to complete. Just have to plan it before sending funds to the exchange
I think that gets lowered after a few trades, I had that happen when I moved some PIVX on there. The first time I had to wait for 200 confirms, the 2nd time only 20 confirms. Have you only just signed up?
I have been on cryptopia for about 6 months, have done some trades there cashed out and deposited many times, buy only crave asking 200 confirmations, other coins are 6 or 2.
You're right, I've never tried to sell any Crave
I've just deposited a few and yes, 200 confs.. Interestingly in my deposit history the PIVX TX I had to wait 200 for now has /20 next to it. So maybe they don't trust the Crave coin as much, and have only started trusting PIVX more recently? I think that gets lowered after a few trades, I had that happen when I moved some PIVX on there. The first time I had to wait for 200 confirms, the 2nd time only 20 confirms. Have you only just signed up?
I have been on cryptopia for about 6 months, have done some trades there cashed out and deposited many times, buy only crave asking 200 confirmations, other coins are 6 or 2.
I think that gets lowered after a few trades, I had that happen when I moved some PIVX on there. The first time I had to wait for 200 confirms, the 2nd time only 20 confirms. Have you only just signed up?
Why does cryptopia require 200 confirmations? It takes a full day to get funds on there. 
391?
Total Masternodes
406
CRAVE Locked in MasterNodes
203,000 (15.37%)
but some single guys own alot of them.
Total Masternodes
406
CRAVE Locked in MasterNodes
203,000 (15.37%)
but some single guys own alot of them.
Jump to: