Topic: CRAVE: Revival - page 26. (Read 54978 times)

Quote from: tkon3 on July 25, 2017, 10:07:22 AM

Just create a new address in your controller wallet, send 500, create a mn2 folder that looks like your first node, but with the new privkey and port info in your .conf. Add it to your masternode.conf, and make the mn wallet is running. Then start it from the controller.

I believe that's in the guide?

Why after 30 min was running masternode in my controller wallet -> Crave network status "Active (secs)" is 00m:00s?

Check if your masternode is reachable from outside. Add firewall rules / port forwarding.

By telnet on port 9999? In configuration I have the port 9999.

Yes. You can also use this.

nick77777

member

Activity: 504

Merit: 33

Quote from: nick77777 on July 25, 2017, 09:58:43 AM

Quote from: nick77777 on July 25, 2017, 09:58:43 AM

Just create a new address in your controller wallet, send 500, create a mn2 folder that looks like your first node, but with the new privkey and port info in your .conf. Add it to your masternode.conf, and make the mn wallet is running. Then start it from the controller.

I believe that's in the guide?

Why after 30 min was running masternode in my controller wallet -> Crave network status "Active (secs)" is 00m:00s?

Check if your masternode is reachable from outside. Add firewall rules / port forwarding.

By telnet on port 9999? In configuration I have the port 9999.

tkon3

hero member

Activity: 824

Merit: 1000

Just create a new address in your controller wallet, send 500, create a mn2 folder that looks like your first node, but with the new privkey and port info in your .conf. Add it to your masternode.conf, and make the mn wallet is running. Then start it from the controller.

I believe that's in the guide?

Why after 30 min was running masternode in my controller wallet -> Crave network status "Active (secs)" is 00m:00s?

Check if your masternode is reachable from outside. Add firewall rules / port forwarding.

nick77777

member

Activity: 504

Merit: 33

Quote from: nick77777 on July 25, 2017, 03:05:30 AM

Just create a new address in your controller wallet, send 500, create a mn2 folder that looks like your first node, but with the new privkey and port info in your .conf. Add it to your masternode.conf, and make the mn wallet is running. Then start it from the controller.

I believe that's in the guide?

Why after 30 min was running masternode in my controller wallet -> Crave network status "Active (secs)" is 00m:00s?

Slothman

sr. member

Activity: 332

Merit: 263

Embrace The Darkness.

Just create a new address in your controller wallet, send 500, create a mn2 folder that looks like your first node, but with the new privkey and port info in your .conf. Add it to your masternode.conf, and make the mn wallet is running. Then start it from the controller.

I believe that's in the guide?

one_direction

newbie

Activity: 64

Merit: 0

what happend to crave dot masternode dot tk ?

tk Domains are difficult to handle, got one 5 years ago or something...

Quote

Is't problem, If I don't fiil "Reward Address" and "Reward %"?

You're alright,you don't need to fill it

good question.

if i want to setup a second Masternode: do i have to stop my first one?

can i send coin 501-1000 to another adress?

NEVER.SELL.CRAVE....EVER

full member

Activity: 140

Merit: 100

Crave is the furure

Quote from: nick77777 on July 25, 2017, 02:46:01 AM

Hello!
I created one masternode yesterday (it's working 12 hours).
How many times need waiting to the first reward usually?
Thanks!

crave.masternodes.pro

Stats can be seen there. To see the average reward times, you may have to navigate to the advanced stats page.

Thank you very much!

AVG. AWARD FREQENCY
10.22 hrs

Is't problem, If I don't fiil "Reward Address" and "Reward %"?

You're alright,you don't need to fill it

nick77777

member

Activity: 504

Merit: 33

Quote from: nick77777 on July 25, 2017, 02:46:01 AM

Hello!
I created one masternode yesterday (it's working 12 hours).
How many times need waiting to the first reward usually?
Thanks!

crave.masternodes.pro

Stats can be seen there. To see the average reward times, you may have to navigate to the advanced stats page.

Thank you very much!

AVG. AWARD FREQENCY
10.22 hrs

Is't problem, If I don't fiil "Reward Address" and "Reward %"?

nick77777

member

Activity: 504

Merit: 33

Quote from: nick77777 on July 25, 2017, 02:46:01 AM

Hello!
I created one masternode yesterday (it's working 12 hours).
How many times need waiting to the first reward usually?
Thanks!

crave.masternodes.pro

Stats can be seen there

My status is Active with first 10 minutes after starting.
The time of reward is random for my masternode?

Elkmar

full member

Activity: 294

Merit: 100

Quote from: nick77777 on July 25, 2017, 02:46:01 AM

Hello!
I created one masternode yesterday (it's working 12 hours).
How many times need waiting to the first reward usually?
Thanks!

crave.masternodes.pro

Stats can be seen there

Seems like everything has been updated and is perfect now !

Slothman

sr. member

Activity: 332

Merit: 263

Embrace The Darkness.

Quote from: nick77777 on July 25, 2017, 02:46:01 AM

Hello!
I created one masternode yesterday (it's working 12 hours).
How many times need waiting to the first reward usually?
Thanks!

crave.masternodes.pro

Stats can be seen there. To see the average reward times, you may have to navigate to the advanced stats page.

nick77777

member

Activity: 504

Merit: 33

Hello!
I created one masternode yesterday (it's working 12 hours).
How many times need waiting to the first reward usually?
Thanks!

junzotojunzo

member

Activity: 70

Merit: 10

Quote from: junzotojunzo on July 24, 2017, 07:49:58 PM

Quote from: tkon3 on July 24, 2017, 06:40:52 PM

Quote from: junzotojunzo on July 24, 2017, 06:16:48 PM

Quote from: junzotojunzo on July 24, 2017, 05:50:55 PM

Hi,

I'm in step 2 of setting up my first masternode guide and I'm stuck at:

11 - Enter "Address" - "YOUREXTERNALIP:PORT" (your external white ip and port for masternode)

What port am I suppose to use or ideal?

Thanks

The one you set in your conf file with the "port=xxxx" line. Default is 30104 but a lot of people use the 9999.

Thank you sir for your blazing fast reply!

Do I still have to create/open port 9999 in my router?

You have to open the port you are using, if its the 9999 then yes.

Thank you sir.

I have started my masternode but have this error from my controller wallet:

Successfully started 0 masternodes, failed to start 2, total 2
Failed to start MN1. error:could not allocate vin
Failed to start MN1. error:could not allocate vin

This is my crave.config:

port=9999
masternode=1
masternodeaddr=60.XX.XX.87.X2X:9999
masternodeprivkey=8kiXXXXXXXXXXXXXXXXXXf9oL

Additionally, creating my controller wallet and this is what I inputted:

Alias - MN1
Address - 60.XX.XX.87.X2X:9999
Privkey - 8kiXXXXXXXXXXXXXXXXXXf9oL
TxHash - b590XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXlk019
Output Index - 0

Am I doing anything wrong in any steps and why does it says failed to start 2? I'm only creating 1 masternode...

I figured it out. I had to unlock my wallet...

junzotojunzo

member

Activity: 70

Merit: 10

Quote from: tkon3 on July 24, 2017, 06:40:52 PM

Quote from: junzotojunzo on July 24, 2017, 06:16:48 PM

Quote from: junzotojunzo on July 24, 2017, 05:50:55 PM

Hi,

I'm in step 2 of setting up my first masternode guide and I'm stuck at:

11 - Enter "Address" - "YOUREXTERNALIP:PORT" (your external white ip and port for masternode)

What port am I suppose to use or ideal?

Thanks

The one you set in your conf file with the "port=xxxx" line. Default is 30104 but a lot of people use the 9999.

Thank you sir for your blazing fast reply!

Do I still have to create/open port 9999 in my router?

You have to open the port you are using, if its the 9999 then yes.

Thank you sir.

I have started my masternode but have this error from my controller wallet:

Successfully started 0 masternodes, failed to start 2, total 2
Failed to start MN1. error:could not allocate vin
Failed to start MN1. error:could not allocate vin

This is my crave.config:

port=9999
masternode=1
masternodeaddr=60.XX.XX.87.X2X:9999
masternodeprivkey=8kiXXXXXXXXXXXXXXXXXXf9oL

Additionally, creating my controller wallet and this is what I inputted:

Alias - MN1
Address - 60.XX.XX.87.X2X:9999
Privkey - 8kiXXXXXXXXXXXXXXXXXXf9oL
TxHash - b590XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXlk019
Output Index - 0

Am I doing anything wrong in any steps and why does it says failed to start 2? I'm only creating 1 masternode...

tkon3

hero member

Activity: 824

Merit: 1000

Quote from: junzotojunzo on July 24, 2017, 06:16:48 PM

Quote from: junzotojunzo on July 24, 2017, 05:50:55 PM

Hi,

I'm in step 2 of setting up my first masternode guide and I'm stuck at:

11 - Enter "Address" - "YOUREXTERNALIP:PORT" (your external white ip and port for masternode)

What port am I suppose to use or ideal?

Thanks

The one you set in your conf file with the "port=xxxx" line. Default is 30104 but a lot of people use the 9999.

Thank you sir for your blazing fast reply!

Do I still have to create/open port 9999 in my router?

You have to open the port you are using, if its the 9999 then yes.

robert3harrison

full member

Activity: 219

Merit: 100

Anyone have a guide for running multiple MN's on a Linux system (not on a vps, but my own system)?

junzotojunzo

member

Activity: 70

Merit: 10