cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool! - page 14.

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: sixxkilur on November 16, 2015, 09:53:41 PM

Does Ghash.IO Pool work it says Pool Offline; I have enabled the API on Cex.IO for GHash.IO?

Ahh, thanks for reporting. Took some time to figure out what was wrong. If the user had no balance, it would report as offline.

I have corrected this. Now you should be able to see GHASH stats in v2.1.0.28

sixxkilur

newbie

Activity: 19

Merit: 0

Does Ghash.IO Pool work it says Pool Offline; I have enabled the API on Cex.IO for GHash.IO?

ATCkit

hero member

Activity: 786

Merit: 1000

Quote from: Mikestang on November 16, 2015, 05:39:29 PM

Quote from: ATCkit on November 13, 2015, 10:50:00 AM

when I ssh, do i use the same username as i did when i logged into the rig?

Yes, your login credentials for ssh are the same as the GUI web interface you use to access the miner. On some clients when you enter the password in ssh the cursor does not move and it does not appear you are typing anything; just type the password like normal and hit enter and you should be good to go.

That's what I thought. I keeping getting access denied after i enter the pw. hmm

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: ATCkit on November 13, 2015, 10:50:00 AM

when I ssh, do i use the same username as i did when i logged into the rig?

Yes, your login credentials for ssh are the same as the GUI web interface you use to access the miner. On some clients when you enter the password in ssh the cursor does not move and it does not appear you are typing anything; just type the password like normal and hit enter and you should be good to go.

sixxkilur

newbie

Activity: 19

Merit: 0

Thank you for the quick response; and I look forward to the updates.

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: sixxkilur on November 15, 2015, 11:06:37 PM

Works great except for using the Wallet API on Coinbase. I have only 3 active addresses and then the 2 auto generated ones for the profile on Coinbase since I am new to Bitcoin.
Adding your addresses in the wallets section of cryptoGlance is not showing balance like it should.

I have three addresses added from Coinbase and it is only showing a balance from the last transaction received on the 2nd address; see images:

Coinbase moves your coins to a secure offline address. You can find more information about this on the forum when researching recommended wallet safety practises.

We'll be building more to cryptoglance in the next coming months to support coinbase api

sixxkilur

newbie

Activity: 19

Merit: 0

Works great except for using the Wallet API on Coinbase. I have only 3 active addresses and then the 2 auto generated ones for the profile on Coinbase since I am new to Bitcoin.
Adding your addresses in the wallets section of cryptoGlance is not showing balance like it should.

I have three addresses added from Coinbase and it is only showing a balance from the last transaction received on the 2nd address; see images:

http://s6.postimg.org/6pbvmzgep/wallet1.png
http://s6.postimg.org/3wn9gp5g1/wallet2.png

ATCkit

hero member

Activity: 786

Merit: 1000

Quote from: allinvain on November 12, 2015, 10:28:12 PM

Quote from: ATCkit on November 12, 2015, 02:33:29 PM

I had no problem with my Antminers. However, crytoGlance can't seem to find my Spondoolies SP31.

Any ideas?

That's cause you have to allow API port access from the IP of the computer you intend to run this software on. By default API access is allowed only from the localhost (ie the SP31 itself) On the Spondoolies gear you have to ssh into them, and then edit the /etc/cgminer.conf.template

By default there is no ssh password on the root account, so you have to go into your SP31 "settings" section and make sure you set an SSH password. Once that is done use a terminal emulator like putty and ssh into the your SP31. Then do:

vi /etc/cgminer.conf.template
press "i" to enter edit mode - now you can add or remove to the section where it says "W:127.0.0.1" . Add in there the ip of your management PC so it looks like "W:127.0.0.1,192.168.1.10" as an example
press "Esc" key to exit out of edit/insert mode and then press ":" and then press "wq" (which tells vi to write changes to the file and then quit).

Now go back into the SP31 admin panel and go to the pools section, and press the save button. Nevermind that you did not make any changes. This will restart cgminer process and now you'll see in the section below the pool info that the IP address of your management PC is now in the API allow list.

Now you should be able to set it up in cryptoglance no problem.

Enjoy!

when I ssh, do i use the same username as i did when i logged into the rig?

generalt

legendary

Activity: 1096

Merit: 1021

Quote from: allinvain on November 12, 2015, 10:19:35 PM

Quote from: generalt on November 12, 2015, 04:10:15 PM

Any idea how I can update the version of php on the Windows version to the latest?

You should not need to as this package does not depend on a separate windows php install. It uses a self contained php engine.

Thanks. The only reason that I want to upgrade the version of php included is because my security scanner keeps nagging me to update the php version.

ATCkit

hero member

Activity: 786

Merit: 1000

Quote from: allinvain on November 12, 2015, 10:28:12 PM

Quote from: ATCkit on November 12, 2015, 02:33:29 PM

I had no problem with my Antminers. However, crytoGlance can't seem to find my Spondoolies SP31.

Any ideas?

That's cause you have to allow API port access from the IP of the computer you intend to run this software on. By default API access is allowed only from the localhost (ie the SP31 itself) On the Spondoolies gear you have to ssh into them, and then....
...Now you should be able to set it up in cryptoglance no problem.

Enjoy!

Thx

tolazy

full member

Activity: 196

Merit: 100

ok. sounds good. thanks for fast reply

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: tolazy on November 13, 2015, 06:52:18 AM

hi.

i've tried to use this guide https://bitcointalk.org/index.php?topic=623672.new#new
but in cryptoclance i only see 3 pools even if i have set 5 on the antminer s1 is this a cryptoclance setting or something else.

normal config of antminer s1: i've set 3 pools and i can see them in cryptoclance and i can add new pools and switch to them but,
after restart of the antminer i only got the 3 that are set on the antminer

its the web version of cryptoglance i use. i'm on nightly build

This is because the configuration is not saved. We're looking at ways to save a config file in cryptoglance and readd them to the miner on reboot. Cgminer API has functionality to save the config, however it would crash sone miners

tolazy

full member

Activity: 196

Merit: 100

hi.

i've tried to use this guide https://bitcointalk.org/index.php?topic=623672.new#new
but in cryptoclance i only see 3 pools even if i have set 5 on the antminer s1 is this a cryptoclance setting or something else.

normal config of antminer s1: i've set 3 pools and i can see them in cryptoclance and i can add new pools and switch to them but,
after restart of the antminer i only got the 3 that are set on the antminer

its the web version of cryptoglance i use. i'm on nightly build

allinvain

legendary

Activity: 3080

Merit: 1083

Quote from: ATCkit on November 12, 2015, 02:33:29 PM

I had no problem with my Antminers. However, crytoGlance can't seem to find my Spondoolies SP31.

Any ideas?

That's cause you have to allow API port access from the IP of the computer you intend to run this software on. By default API access is allowed only from the localhost (ie the SP31 itself) On the Spondoolies gear you have to ssh into them, and then edit the /etc/cgminer.conf.template

By default there is no ssh password on the root account, so you have to go into your SP31 "settings" section and make sure you set an SSH password. Once that is done use a terminal emulator like putty and ssh into the your SP31. Then do:

vi /etc/cgminer.conf.template
press "i" to enter edit mode - now you can add or remove to the section where it says "W:127.0.0.1" . Add in there the ip of your management PC so it looks like "W:127.0.0.1,192.168.1.10" as an example
press "Esc" key to exit out of edit/insert mode and then press ":" and then press "wq" (which tells vi to write changes to the file and then quit).

Now go back into the SP31 admin panel and go to the pools section, and press the save button. Nevermind that you did not make any changes. This will restart cgminer process and now you'll see in the section below the pool info that the IP address of your management PC is now in the API allow list.

Now you should be able to set it up in cryptoglance no problem.

Enjoy!

allinvain

legendary

Activity: 3080

Merit: 1083

Quote from: generalt on November 12, 2015, 04:10:15 PM

Any idea how I can update the version of php on the Windows version to the latest?

You should not need to as this package does not depend on a separate windows php install. It uses a self contained php engine.

generalt

legendary

Activity: 1096

Merit: 1021

Any idea how I can update the version of php on the Windows version to the latest?

ATCkit

hero member

Activity: 786

Merit: 1000

I had no problem with my Antminers. However, crytoGlance can't seem to find my Spondoolies SP31.

Any ideas?

allinvain

legendary

Activity: 3080

Merit: 1083

Quote from: cryptoglance on November 06, 2015, 05:15:11 PM

Quote from: allinvain on November 06, 2015, 05:00:56 PM

Yes, no? Ok, I see the devs are super busy saving the galaxy from evil. I shall have to put up a "for hire" thread somewhere.

Cheers!

Sorry, not saving the galaxy.

We do not want to say yes if we cant allocate the time, but we also do not want to say no because money.

We're still discussing and working on committed timelines to get this work done, with the intention of doing it for no cost and open source.

I'd be willing to donate some cash towards the added improvements with no strings attached - you release the improvements as open source. We do need some rather more "service provider" orientated features though so those can be discussed later with the possibility of open sourcing those as well. I created a wanted add here: https://bitcointalksearch.org/topic/need-coder-to-build-a-miner-monitoringaccounting-system-closed-1239603

As you can see we'd like to have the ability to have hosting customers log into a page and monitor their miners as well as alter pool info, see neat eye candy graphs, etc.

However, obviously more important than that is miner monitoring and reporting features, downtime tracking etc.

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: allinvain on November 06, 2015, 05:00:56 PM

Yes, no? Ok, I see the devs are super busy saving the galaxy from evil. I shall have to put up a "for hire" thread somewhere.

Cheers!

Sorry, not saving the galaxy.

We do not want to say yes if we cant allocate the time, but we also do not want to say no because money.

We're still discussing and working on committed timelines to get this work done, with the intention of doing it for no cost and open source.

allinvain

legendary

Activity: 3080

Merit: 1083

Yes, no? Ok, I see the devs are super busy saving the galaxy from evil. I shall have to put up a "for hire" thread somewhere.

Cheers!

Topic: cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool! - page 14. (Read 130279 times)