cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool! - page 21.

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: Real-Duke on May 31, 2015, 01:29:53 PM

Thanks for reply!
Simply pressing "Esc" + "i" to start edit modus of the file? Sorry if I'm completly wrong here

You can try to use vim

Start vim with: sudo vim filename
i - to enter edit mode
ESC - to exit edit mode
:wq - to save and exit
:q! - to exit without saving

Once your changes are done, restart:
sudo shutdown -r now

Real-Duke

legendary

Activity: 3486

Merit: 2287

Wheel of Whales 🐳

Thanks for reply!
Simply pressing "Esc" + "i" to start edit modus of the file? Sorry if I'm completly wrong here

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: Real-Duke on May 31, 2015, 12:19:03 PM

Sorry for the maybe stupid question but cryptoglance shows all my 4 S3 miners and the correct pool/hashspeed
But I just tried for the first time to make a pool switch to the second pool in the list and nothings appears/changes after saving.
Trying to make a restart ends in the same result.
Looks like I have no remote control but all works fine if I do it on the miner webinterface.
Any suggestions?
Thanks in advance

This happens when you do not have write access to the cgminer API. Take a look at this post on how to configure the cgminer config on a bitmain product: https://bitcointalksearch.org/topic/m.11078275

For CryptoGlance to update the miner remotely, you need to have a W: in front of the IP you want to grant access to.

Real-Duke

legendary

Activity: 3486

Merit: 2287

Wheel of Whales 🐳

Sorry for the maybe stupid question but cryptoglance shows all my 4 S3 miners and the correct pool/hashspeed
But I just tried for the first time to make a pool switch to the second pool in the list and nothings appears/changes after saving.
Trying to make a restart ends in the same result.
Looks like I have no remote control but all works fine if I do it on the miner webinterface.
Any suggestions?
Thanks in advance

davidrentaobition

newbie

Activity: 16

Merit: 0

Quote from: Mikestang on May 28, 2015, 06:47:29 PM

Quote from: davidrentaobition on May 28, 2015, 05:26:50 PM

please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta

and i using 2.0.2 now.

thanks you share...

davidrentao

I had that problem, and here is the solution that was posted that worked for me (#2):

Quote from: cryptoglance on April 16, 2015, 04:25:18 PM

First try these steps:
1) Run the app as administrator and try to update
2) If 1 doesn't work, Navigate to: C:\cryptroglance\application\. If there is an "update" folder, delete it and try to run the update again.

thanks lots. i make out problem, it's very stable now,

however, if cryptroglance support to ccminer, it's perfect for all people!!! i thought many people hold nvidia cards ot mining after time, please consider it.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: davidrentaobition on May 28, 2015, 05:26:50 PM

please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta

and i using 2.0.2 now.

thanks you share...

davidrentao

I had that problem, and here is the solution that was posted that worked for me (#2):

Quote from: cryptoglance on April 16, 2015, 04:25:18 PM

First try these steps:
1) Run the app as administrator and try to update
2) If 1 doesn't work, Navigate to: C:\cryptroglance\application\. If there is an "update" folder, delete it and try to run the update again.

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: davidrentaobition on May 28, 2015, 05:26:50 PM

please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta

and i using 2.0.2 now.

thanks you share...

davidrentao

Are you using the Windows App or on a linux machine? Based on the slash above, it looks like windows...

davidrentaobition

newbie

Activity: 16

Merit: 0

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: cryptoglance on May 26, 2015, 10:32:18 PM

Version 2.1 has been released.

Thanks, updating now!

cryptoglance

sr. member

Activity: 298

Merit: 250

Version 2.1 has been released.

Code:

[ v2.1 ]

FEATURES
========
- MobileMiner support. Can be enabled via Settings. http://www.mobileminerapp.com/
- Added app specific way to zoom in/out
- Zoom Out: CTRL + <
- Zoom In: CTRL + >
- Reset Zoom: CTRL + /
- Added manual update check in Settings page
- Added New Zealand Dollar as a Fiat option in wallets
- Added current FIAT price of a coin
- NOMP now detects the coin being mined for a specific address. Useful for profit-switching pools
- Pools have Offline mode. If no data is returned, or fails to connect, it is "offline"

POOLS
=====
- [+POOL] AntPool
- [+POOL] BitMinter
- [+POOL] Burst.Ninja
- [+POOL] BitcoinCZ aka Slush
- [+POOL] NiceHash/WestHash
- [+POOL] P2Pool

POOLS
=====
- [+POOL] NiceHash/WestHash
- [+POOL] BitcoinCZ aka Slush
- [+POOL] AntPool
- [+POOL] BitMinter
- [+POOL] P2Pool

ALGORITHMS
==========
- [+Algorithm] Blake-256
- [+Algorithm] Groestl
- [+Algorithm] Jackpot
- [+Algorithm] Lyra2RE
- [+Algorithm] Neos-Blake
- [+Algorithm] NeoScrypt
- [+Algorithm] WHIRL
- [+Algorithm] X17

COINS
=====
- [+COIN] Burstcoin
- [+COIN] DogeCoin Dark

HOTFIXES
========
- Changed from BitcoinIndex.es to FirstRally.com
- Fixed issue with Bitcoin Affiliate Network saving an empty name/label
- Fixed incorrect reporting of rejected share warning
- Added permission checking to the update process
- Fixed permissionfix script, should correctly set permissions on parent folder
- Fixed issue with pools not loading sometimes
- Added round duration to CKPool
- Fixed incorrect BTC Guild pool hashrate
- Fixed incorrect BTC Guild worker count
- Removed useless BTC column when looking at a BTC wallet
- Update page will now display correctly for those with slow connections
- Attempt to fix issue where the update.zip does not delete in some cases
- Fixed issue where offline rigs would randomly appear/disappear in the overview panel
- Fixed issue with Antpool on Windows
- Fixed issue when using only 1 rig
- Padded the time-out for users with 60+ rigs
- Fixed issue with Linux users who do not have posix installed

KNOWN ISSUES
============
- Users with lots of rigs may experience a long start-up time
- Miner Failover may report incorrect active pool
- Wallets can take a long time to load

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: cryptoglance on May 25, 2015, 10:43:47 PM

With the downtime of Bitcointalk, we held back the release as this is the primary outlet of bug reports.

And I'm holding back my summer power down until I can minimize panels.

cryptoglance

sr. member

Activity: 298

Merit: 250

Quote from: vabchgent on May 25, 2015, 06:57:16 PM

Quote from: aarons6 on May 21, 2015, 05:56:16 PM

Quote from: vabchgent on May 21, 2015, 02:00:35 PM

@cryptoglance pool picker looks interesting.Thanks

unfortunately with the pools they list you would make more just leaving your miner on antpool

Have you checked your payment on Antpool the past 2 days.

@Cryptoglance the pool picker will be our pool choices?

With the downtime of Bitcointalk, we held back the release as this is the primary outlet of bug reports.

Pool Picker is just a website that tracks pools and determines the highest payout

vabchgent

sr. member

Activity: 840

Merit: 251

Quote from: aarons6 on May 21, 2015, 05:56:16 PM

Quote from: vabchgent on May 21, 2015, 02:00:35 PM

@cryptoglance pool picker looks interesting.Thanks

unfortunately with the pools they list you would make more just leaving your miner on antpool

Have you checked your payment on Antpool the past 2 days.

@Cryptoglance the pool picker will be our pool choices?

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: vabchgent on May 21, 2015, 02:00:35 PM

@cryptoglance pool picker looks interesting.Thanks

unfortunately with the pools they list you would make more just leaving your miner on antpool

vabchgent

sr. member

Activity: 840

Merit: 251

@cryptoglance pool picker looks interesting.Thanks

Mikestang

legendary

Activity: 1274

Merit: 1000

Just now I restarted my miner in CG since the U3 had gone zombie and it cleared the bunk contribution to the global average display. Next time I will try just resetting stats and see if that fixes it, too.

Mikestang

legendary

Activity: 1274

Merit: 1000

Great, thanks for the update, looking forward to the new version!

Quote from: cryptoglance on May 18, 2015, 04:15:22 PM

We're looking at this zombie device issue as closely as possible. All rig information displayed in cryptoglance is a result of the data provided by the cgminer/bfgminer API, which makes this a little difficult to resolve.

I noticed that the average is only additive in the global average box, not in the rig box. In the rig box when the zombie resets, the rig average is displayed correctly, but the global average box still shows high. Hopefully that helps narrow it down.

cryptoglance

sr. member

Activity: 298

Merit: 250

Hey Everyone,

Just letting you know we're still around, just fairly busy. We're looking at this zombie device issue as closely as possible. All rig information displayed in cryptoglance is a result of the data provided by the cgminer/bfgminer API, which makes this a little difficult to resolve.

Our current plan is to compare devices by serial number, however some asic devices (eg: gridseed and DualMiner) sometimes have the same serial number. We're still working on a solution for this, hopefully 1 more week and we can push out an updated Nightly build.

As for the major release, tomorrow we will be moving the current beta to Major Release. Shortly after that (about a week) you'll see some more updates coming out. These updates will contain some functionality such as a Pool Picker panel (http://poolpicker.eu/), and ability to minimize panels.
Here's a screenshot:

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: vabchgent on May 18, 2015, 11:33:58 AM

Quote from: maracuchoff on May 17, 2015, 12:17:44 PM

I want to see from my phone android mining activity when I balance my house, there is a tutorial on youtube on how to set?

Best bet download mobile miner from here
http://www.mobileminerapp.com/

Set up an account - Set the code in cryptoglance. Available in the latest build.
Tools>Cryptoglance settings>mobile miner
user email for Mobile miner [email protected] and code xxx-xxxx-xxx

Option 2 port forward your router to the cryptoglance instance on port 4014.

Just use the cryptoGlance app, no need for mobile miner.

vabchgent

sr. member

Activity: 840

Merit: 251

@cryptoglance
Looks like the miners are still loading up takes about a week or two. Like the API is loading up any / all miners go offline or hang. I know I should restart my miners every so often. But putting it out there if you have any ideas. Thanks

Topic: cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool! - page 21. (Read 130293 times)