Custom RAM Timings for GPU's with GDDR5 - DOWNLOAD LINKS - UPDATED - page 57.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: ray_saeed on February 09, 2017, 08:02:54 PM

Quote from: Wolf0 on February 09, 2017, 07:06:48 PM

Quote from: ray_saeed on February 09, 2017, 06:55:05 PM

Quote from: EuroCanuck on February 09, 2017, 06:11:41 PM

Quote from: ray_saeed on February 09, 2017, 05:49:23 PM

I am interested in purchasing custom Elpida and Samsung roms for XMR mining with Nitro+ RX 470 OC cards (4GB and 8GB). If you have stable custom roms available please message me with a quote. Thanks.

dude,for free i will help you out.im mining with xfx rx470 4gb black's with elpida. all 24 at doing 28.3mhs on eth and 110ish watts each.

Thanks for the offer buddy

. I am getting around 28 mhs in ETH and getting around 700 h/s in XMR. These cards are undervolted, with clocks @ 1100/1950 and 1500 straps. Was reading about some folks getting upto 900 h/s while mining monero and was interested in getting similar results.

900H/s is a vanity hashrate - it's absolute max and not efficient. 825 - 875 is probably real.

I would be willing to buy in that range as long as it is stable.

Let me know.

zorvalth

full member

Activity: 223

Merit: 100

Quote from: Eliovp on February 12, 2017, 06:48:28 PM

Quote from: batko on February 12, 2017, 04:55:23 PM

Quote from: Eliovp on February 12, 2017, 04:49:06 PM

Quote from: batko on February 12, 2017, 04:42:41 PM

I think sgminer is faster, maybe 900hs with same clock

Well, prove it, linux + sgminer..

If you can do 900 on linux, stable for longer than 12hrs, i will fly over and personally shake your hand on my knees, and you can take a picture of that.. Wink

I say "maybe" read again my post Wink

860hs with claymore miner 1300/2100 is great results Wink

You know what a great result is..

I'll show you..

Core clock 1250, memory clock 2075 , -69mV vddc.

850h Linux, sgminer

RX 480 8G

i'll run this on windows with clay clay, i will most probably hit the 900 marker and go over it if i raise that core even higher. Wink

What is your vddc with -69mV offset?

konqueror

member

Activity: 99

Merit: 10

Quote from: doktor83 on February 13, 2017, 01:17:37 AM

Quote from: Eliovp on February 12, 2017, 04:39:53 PM

No no, do it on linux with sgminer

So if you use macOS you would say do it on macOS...
Anyways all my rigs are on windows, all my friends rigs are on windows, everyone i know is mining on windows..
Sorry i won't install linux just to prove you that my modification can do 800+ on it lol.

Even if it can't it doesn't bother me because i am just into increasing hash = more earnings, doesn't matter if its on freebsd, ubuntu, windows lol

I have cards like yours and I use Linux - I can test your rom and make screenshots for the community Cheesy

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Eliovp on February 12, 2017, 04:39:53 PM

No no, do it on linux with sgminer

So if you use macOS you would say do it on macOS...
Anyways all my rigs are on windows, all my friends rigs are on windows, everyone i know is mining on windows..
Sorry i won't install linux just to prove you that my modification can do 800+ on it lol.

Even if it can't it doesn't bother me because i am just into increasing hash = more earnings, doesn't matter if its on freebsd, ubuntu, windows lol

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: batko on February 12, 2017, 04:55:23 PM

Quote from: Eliovp on February 12, 2017, 04:49:06 PM

Quote from: batko on February 12, 2017, 04:42:41 PM

I think sgminer is faster, maybe 900hs with same clock

Well, prove it, linux + sgminer..

If you can do 900 on linux, stable for longer than 12hrs, i will fly over and personally shake your hand on my knees, and you can take a picture of that.. Wink

I say "maybe" read again my post Wink

860hs with claymore miner 1300/2100 is great results Wink

I would agree its not bad.

I flashed this on windows, strongly based off Heliox older work, just to see what barely breaking 800 on Linux gave me on Clayclay windows, since people like to shoot down my/his work because they almost get as much on Windows/Claymore than we do on Linux/sgminer-gm.

This is with undervolted vbios, i wonder what i would get if i overvolted the f out of it ?

But this mod is very bad compared to 850 on Linux.

I think that mod above from Heliox would probably break 900 at fairly low core... It seem like you can get 10% more on windows vs linux, which should help all of you evaluate how good a mod is when you see sgminer/linux.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: LoneRangir on February 09, 2017, 07:31:31 PM

Do you visualize or simulate your timing parameter changes, or make them and test them live?

I usually make them and test them live, but I know some depend on the values of others, so I often adjust for that.

Eliovp

legendary

Activity: 1050

Merit: 1294

Huh?

Quote from: batko on February 12, 2017, 04:55:23 PM

Quote from: Eliovp on February 12, 2017, 04:49:06 PM

Quote from: batko on February 12, 2017, 04:42:41 PM

I think sgminer is faster, maybe 900hs with same clock

Well, prove it, linux + sgminer..

If you can do 900 on linux, stable for longer than 12hrs, i will fly over and personally shake your hand on my knees, and you can take a picture of that.. Wink

I say "maybe" read again my post Wink

860hs with claymore miner 1300/2100 is great results Wink

You know what a great result is..

I'll show you..

Core clock 1250, memory clock 2075 , -69mV vddc.

850h Linux, sgminer

RX 480 8G

Screenshot

i'll run this on windows with clay clay, i will most probably hit the 900 marker and go over it if i raise that core even higher. Wink

batko

full member

Activity: 169

Merit: 100

Quote from: Eliovp on February 12, 2017, 04:49:06 PM

Quote from: batko on February 12, 2017, 04:42:41 PM

I think sgminer is faster, maybe 900hs with same clock

Well, prove it, linux + sgminer..

If you can do 900 on linux, stable for longer than 12hrs, i will fly over and personally shake your hand on my knees, and you can take a picture of that.. Wink

I say "maybe" read again my post Wink

860hs with claymore miner 1300/2100 is great results Wink

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: avirdoz on February 09, 2017, 07:19:58 PM

Quote from: Wolf0 on February 09, 2017, 07:06:48 PM

Quote from: ray_saeed on February 09, 2017, 06:55:05 PM

Quote from: EuroCanuck on February 09, 2017, 06:11:41 PM

Quote from: ray_saeed on February 09, 2017, 05:49:23 PM

I am interested in purchasing custom Elpida and Samsung roms for XMR mining with Nitro+ RX 470 OC cards (4GB and 8GB). If you have stable custom roms available please message me with a quote. Thanks.

dude,for free i will help you out.im mining with xfx rx470 4gb black's with elpida. all 24 at doing 28.3mhs on eth and 110ish watts each.

Thanks for the offer buddy

. I am getting around 28 mhs in ETH and getting around 700 h/s in XMR. These cards are undervolted, with clocks @ 1100/1950 and 1500 straps. Was reading about some folks getting upto 900 h/s while mining monero and was interested in getting similar results.

900H/s is a vanity hashrate - it's absolute max and not efficient. 825 - 875 is probably real.

What about eth h/r with this custom timings?

I've gotten up to 30MH/s on linux, little more, but honestly, with Eth profit being in the shitter and XMR consuming far less power, who cares? Tongue

Eliovp

legendary

Activity: 1050

Merit: 1294

Huh?

Quote from: batko on February 12, 2017, 04:42:41 PM

I think sgminer is faster, maybe 900hs with same clock

Well, prove it, linux + sgminer..

If you can do 900 on linux, stable for longer than 12hrs, i will fly over and personally shake your hand on my knees, and you can take a picture of that.. Wink

batko

full member

Activity: 169

Merit: 100

I think sgminer is faster, maybe 900hs with same clock

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: ray_saeed on February 09, 2017, 06:55:05 PM

Quote from: EuroCanuck on February 09, 2017, 06:11:41 PM

Quote from: ray_saeed on February 09, 2017, 05:49:23 PM

I am interested in purchasing custom Elpida and Samsung roms for XMR mining with Nitro+ RX 470 OC cards (4GB and 8GB). If you have stable custom roms available please message me with a quote. Thanks.

dude,for free i will help you out.im mining with xfx rx470 4gb black's with elpida. all 24 at doing 28.3mhs on eth and 110ish watts each.

Thanks for the offer buddy

. I am getting around 28 mhs in ETH and getting around 700 h/s in XMR. These cards are undervolted, with clocks @ 1100/1950 and 1500 straps. Was reading about some folks getting upto 900 h/s while mining monero and was interested in getting similar results.

900H/s is a vanity hashrate - it's absolute max and not efficient. 825 - 875 is probably real.

Eliovp

legendary

Activity: 1050

Merit: 1294

Huh?

Quote from: doktor83 on February 12, 2017, 04:20:31 PM

i don't know why are you stuck with the voltage thing?
If you can't lower it by -100 then you simply won't do it, the hashrate stays same (or even better) if i don't undervolt.

The point is the ~ 850hs at 1260/2100 with samsung memory. Thats stock core/+100 mem, which doesn't add on the power consumption.
On full stock 1260/2000 i get around 815hs.

Will put this rom tomorrow on my 5x470 rig and run with sgminer if that's whats "the thing".

No no, do it on linux with sgminer

I want to see you do 800 + .. Wink

There's a thread from a client of mine testing a 480 4G rom i did for him, i got 800ish on lniux.. he did 850 with ease on windows..

That's my point..

The undervolt point is fairly simple. Card A has an asic quality of X percent (a low one!), which means it has an X amount of leakage, which means it can easily be undervolted and will remain perfectly stable.
CardB has an asic quality of X percent (a high one 'yeah sounds weird..'), which means it has a different amount of leakage and will not easily undervolt.
If you happen to have a good batch, your cards will handle that. If not, you will have systems crashing non stop.

I had a very good batch of Nano's, i could easy do -125mV VDDC and -175!!mV MVDDC, on all of my 100 nano's, others with the same reference design nano's couldn't even handle -100mV MVDDC....

Again, that is my point....

doktor83

hero member

Activity: 2548

Merit: 626

i don't know why are you stuck with the voltage thing?
If you can't lower it by -100 then you simply won't do it, the hashrate stays same (or even better) if i don't undervolt.

The point is the ~ 850hs at 1260/2100 with samsung memory. Thats stock core/+100 mem, which doesn't add on the power consumption.
On full stock 1260/2000 i get around 815hs.

Will put this rom tomorrow on my 5x470 rig and run with sgminer if that's whats "the thing".

batko

full member

Activity: 169

Merit: 100

Quote from: Eliovp on February 12, 2017, 12:04:16 PM

Quote from: doktor83 on February 12, 2017, 11:48:26 AM

My custom timings for 470 8GB Nitro+ OC (11256-02-20G) - Samsung mem

For the powersaver guy :
(1126/2100 @ -120mV)

http://i.imgur.com/ILSqPVT.jpg

For normal usage guy :
(1300/2100 @ -100mV)

http://i.imgur.com/g4AZZqz.jpg

Congrats, you have a card that won the sillicon lottery...

You do realize that 98 out of 100 cards like that can't handle -100mV while running 1300 core??

Try this on a 6xGPU rig.. and while NOT using claymore.. if you can do that, i will say: Congratulations to you sir.

This is normal for 470 NITRO+

I have 6x gpu rig same card all full stable 1300mhz/2125 -100mV for Zcash & XMR, for eth Use lower gpu clok 1150/2125 -175mV

Eliovp

legendary

Activity: 1050

Merit: 1294

Huh?

Quote from: doktor83 on February 12, 2017, 12:10:23 PM

Quote from: Eliovp on February 12, 2017, 12:04:16 PM

Quote from: doktor83 on February 12, 2017, 11:48:26 AM

My custom timings for 470 8GB Nitro+ OC (11256-02-20G) - Samsung mem

For the powersaver guy :
(1126/2100 @ -120mV)

http://i.imgur.com/ILSqPVT.jpg

For normal usage guy :
(1300/2100 @ -100mV)

http://i.imgur.com/g4AZZqz.jpg

Congrats, you have a card that won the sillicon lottery...

You do realize that 98 out of 100 cards like that can't handle -100mV while running 1300 core??

Try this on a 6xGPU rig.. and while NOT using claymore.. if you can do that, i will say: Congratulations to you sir.

Why do you think that 1300 is much when the def clock is 1266 ? Roll Eyes

Also why not claymore ? Not enough power hungry? Better sgminer ? Why?

Also im running a 5xGPU rig with -120mV for weeks now on ETH (145mhs)...

Read your post.

1300 core with a down-volt of -100mV.. (which is very unlikely to last long (perhaps on a few cards..))

then you say: "for the power savings guy.." core 1126 <-- that's almost minus 200 core!! and you lower voltage by -20mV in comparison with the other one.... am i the only one who finds this disturbingly ridiculous?

I was talking to a friend of mine, who is one of the few out here who can also successfully add vddc/mvddc/vddci offsets in a rom, we will, just because windows seems to be the the new thing in the mining world... Roll Eyes

, we will, as soon as we find a few spare minutes, we will setup a windows rig and play along.

Wink

avirdoz

legendary

Activity: 1191

Merit: 1001

Quote from: doktor83 on February 12, 2017, 02:12:27 PM

I checked it now for you:

Idle : 105w from wall
Working : Hash ~ 807 H/s, VDDC : 0.8938 V, 197w from wall

Thanks and nice results.

doktor83

hero member

Activity: 2548

Merit: 626

I checked it now for you:

Idle : 105w from wall
Working : Hash ~ 807 H/s, VDDC : 0.8938 V, 197w from wall

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: niko2004x on February 08, 2017, 08:47:21 PM

Is there a way to read GPU memory error counter in linux?
In windows it seems hwinfo does it somehome.
Something on i2c bus perhaps?

dmesg usually tells you, at least if you fuck up bad.

avirdoz

legendary

Activity: 1191

Merit: 1001

Quote from: doktor83 on February 12, 2017, 11:48:26 AM

My custom timings for 470 8GB Nitro+ OC (11256-02-20G) - Samsung mem

For the powersaver guy :
(1126/2100 @ -120mV)

For normal usage guy :
(1300/2100 @ -100mV)

Did you check what power usage from the wall with "powersaver guy"?

Topic: Custom RAM Timings for GPU's with GDDR5 - DOWNLOAD LINKS - UPDATED - page 57. (Read 155685 times)