Please answering ...!
Is it possible to change the algorithm by the company?
With software update?
Because there is no way but this helps us
With software update?
Because there is no way but this helps us
Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 21. (Read 42511 times)
@ZIGMINER
Please answering ...!
Please answering ...!
next version will add each hashboard hashrate monitor for autorestart
HELLO ZIGMINER,
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
<>
How do i know that? Very easy...
<
hello @zigminer
can i OC in 20181116 ?
how much can change frequency ( No Problem For Hashboard ) ?
My frequency is now 1000 , it's max or I can change this to 1050 ?
next version will add each hashboard hashrate monitor for autorestart
HELLO ZIGMINER,
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
<>
How do i know that? Very easy...
<
For the Zig Z1+ - I installed 20181116 and am only hashing around 6.0-6.2 Gh/s between 800-925Mhz...not consistent rates across different pools...have done the soft resets, pulled the power and waited, etc.
Of the four firmware releases - 20181015, 20181029, 20181105, 20181116 - is there one in particular that seems to be the "best" from a high hashrate and consistency standpoint? I'm considering flashing back down to an earlier version, but would love to save the time if anyone has thoughts here.
Of the four firmware releases - 20181015, 20181029, 20181105, 20181116 - is there one in particular that seems to be the "best" from a high hashrate and consistency standpoint? I'm considering flashing back down to an earlier version, but would love to save the time if anyone has thoughts here.
you should add two image more to the list : 20181409 (first image) and 20183009(mostly used)
For the Zig Z1+ - I installed 20181116 and am only hashing around 6.0-6.2 Gh/s between 800-925Mhz...not consistent rates across different pools...have done the soft resets, pulled the power and waited, etc.
Of the four firmware releases - 20181015, 20181029, 20181105, 20181116 - is there one in particular that seems to be the "best" from a high hashrate and consistency standpoint? I'm considering flashing back down to an earlier version, but would love to save the time if anyone has thoughts here.
Of the four firmware releases - 20181015, 20181029, 20181105, 20181116 - is there one in particular that seems to be the "best" from a high hashrate and consistency standpoint? I'm considering flashing back down to an earlier version, but would love to save the time if anyone has thoughts here.
Is it possible to change the algorithm by the company?
With software update?
Because there is no way but this helps us
With software update?
Because there is no way but this helps us
of course you can. just use brain.exe and research.exe and then install it with notAvirus.exe
@topoolscom
first of all
i do not have any stock. i tested i wrote my experience. if you dont believe please test yourself and loose your time and money.
first of all
i do not have any stock. i tested i wrote my experience. if you dont believe please test yourself and loose your time and money.
Hi all! after installing the new firmware, using imageUSB.exe and following instructions ( it does not matter which versions) the miner is not identified.
https://imgur.com/uS2Pu34
What I am doing wrong? Any idea
Thanks in advance,
I really need to disable Fan function via new firmware
https://imgur.com/uS2Pu34
What I am doing wrong? Any idea
Thanks in advance,
I really need to disable Fan function via new firmware
Is it possible to change the algorithm by the company?
With software update?
Because there is no way but this helps us
With software update?
Because there is no way but this helps us
I am trying to open mining pool service, may I have your contact information then I can offering very nice commision fee to all of your guys?
¡ tried three pools including this one.
nlpool gives 0.0003 btc for 10 hours
blockmasters gives 0.0005 btc for 10 hours
nicehash gives 0.0009 btc for 10 hours
champion is nicehash. it gives 2x and 3x more in same time period. do not waste your time and device.
Bro, do you have nicehash stocks??? i have been in contact with many miners since yesterday, and thrust me, there is no such thing as a pool paying 3 times as much as another pool. Margins are more likely to be a few percent at maximum.
First , the difficulty is going up enormously since these Z1 devices are oversold, causing more instability in rewards. This is not only on my pool , but on all pools since it takes longer time to find blocks. The difficulty for Monacoin has gone up a factor 10 since mid october to give you an example, where price has stayed more or less the same. Please feel free to check the data and put the graph on 3 months:
https://www.coinwarz.com/difficulty-charts/monacoin-difficulty-chart
If you are an expierenced miner you should know that if you want to say something reasonable that you have to test like 72 hours or so to get some decent data.
I just try to help people to get a part of their investment back .... as ROI seems impossible with profits of +/- 15 to 20 USD per day ex. power costs.
Hello everyone,
Spamming is not my thing, so i'll try to keep it short
@Nlpool.nl we are running a profitswitching pool also running the Lyra2V2 algo and the most profitable Lyra2V2 coins in it, meaning you can set a BTC or LTC wallet , but also any other coin wallet as long as the coin is present in our pool.
As the pool can use some extra hashrate to make it even more efficiënt i am looking for people with the Z1 miners.
If you can help me out and if you are looking for some extra profit : > i can give you a 5% extra weekly bonus if you are a big miner for 4 weeks. If you are interested please contact me @ Discord or Telegram.
>>
NLPOOL.NL | Highly profitable Lyra2V2 Mining Pool
Start Mining:
- Approximately 20 - 30% extra profits with custom finetuned profit switching system in the pool
- Payouts possible in any currency present in our pool (LTC / BTC / RACE / VTC etc.)
- High profits for miners by lowering latency and stale shares
- Blocks are distributed proportionally among valid submitted shares.
- High security / DDOS protection with 99% uptime, multiple nodes, loadbalancers and status system
- Professional pool - No un-announced downtime. We care for your profits.
- Hourly payments
- 0.25% fee
Support
Telegram - Telegram
Discord - Discord
Spamming is not my thing, so i'll try to keep it short
@Nlpool.nl we are running a profitswitching pool also running the Lyra2V2 algo and the most profitable Lyra2V2 coins in it, meaning you can set a BTC or LTC wallet , but also any other coin wallet as long as the coin is present in our pool.
As the pool can use some extra hashrate to make it even more efficiënt i am looking for people with the Z1 miners.
If you can help me out and if you are looking for some extra profit : > i can give you a 5% extra weekly bonus if you are a big miner for 4 weeks. If you are interested please contact me @ Discord or Telegram.
>>
NLPOOL.NL | Highly profitable Lyra2V2 Mining Pool
Start Mining:
Code:
-o stratum+tcp://mine.nlpool.nl:4533 -u -p c=x
Our features:- Approximately 20 - 30% extra profits with custom finetuned profit switching system in the pool
- Payouts possible in any currency present in our pool (LTC / BTC / RACE / VTC etc.)
- High profits for miners by lowering latency and stale shares
- Blocks are distributed proportionally among valid submitted shares.
- High security / DDOS protection with 99% uptime, multiple nodes, loadbalancers and status system
- Professional pool - No un-announced downtime. We care for your profits.
- Hourly payments
- 0.25% fee
Support
Telegram - Telegram
Discord - Discord
¡ tried three pools including this one.
nlpool gives 0.0003 btc for 10 hours
blockmasters gives 0.0005 btc for 10 hours
nicehash gives 0.0009 btc for 10 hours
champion is nicehash. it gives 2x and 3x more in same time period. do not waste your time and device.
Bro, do you have nicehash stocks??? i have been in contact with many miners since yesterday, and thrust me, there is no such thing as a pool paying 3 times as much as another pool. Margins are more likely to be a few percent at maximum.
First , the difficulty is going up enormously since these Z1 devices are oversold, causing more instability in rewards. This is not only on my pool , but on all pools since it takes longer time to find blocks. The difficulty for Monacoin has gone up a factor 10 since mid october to give you an example, where price has stayed more or less the same. Please feel free to check the data and put the graph on 3 months:
https://www.coinwarz.com/difficulty-charts/monacoin-difficulty-chart
If you are an expierenced miner you should know that if you want to say something reasonable that you have to test like 72 hours or so to get some decent data.
I just try to help people to get a part of their investment back .... as ROI seems impossible with profits of +/- 15 to 20 USD per day ex. power costs.
HELLO ZIGMINER,
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
<>
How do i know that? Very easy...
<
Quote
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
what about steal share and reject ?
and stability?
Up until this version i have never had a problem with mounting the software and the miner will work fine. I also have to switch them to the .0 range but iam aware of that so its not that. most time i can use imageusb be to reformat. i ended up using one of my old versions i had saved on a usb and getting the miner to work that way. after all the dramas last night i still havent gotten 1116 to work
For me its always a bit hard to get the usb formatted, but once this hapend and all partitions are gone , stick is clean, i can just write the image with the .exe provided and the miner works? Ow i always have to change the ip from the .1 to the .0 range again... but once that is done im back online 
im running the new firmware atm and it works. Strange thing is i cant format my usb with my desktop windows 10 but when i plug it in a old laptop it works... via dos. Cmd diskpart list disk select disk "x" clean.
EDIT: when i try in my desktop the usb apears and disapears again... when i try in an old laptop it stays sometimes 😂 maybe someone can provide me a better solution to clean the usb? Anyway once cleaned write is no issue
im running the new firmware atm and it works. Strange thing is i cant format my usb with my desktop windows 10 but when i plug it in a old laptop it works... via dos. Cmd diskpart list disk select disk "x" clean. EDIT: when i try in my desktop the usb apears and disapears again... when i try in an old laptop it stays sometimes 😂 maybe someone can provide me a better solution to clean the usb? Anyway once cleaned write is no issue
Add me to the list of people that cant get 1116 to mount or if it does mount the miner wont work. I have tried downloading image.usb from the passmark site and still have issues V1.4 and v1.3. Have tried multiple usbs and still no luck. I have even tried to remount old stored version i have saved on my pc and they wont mount either. It also appears to always be the same things that fail to verify.
23:22:58 - Computed checksums on Drive Verbatim STORE N GO (Disk 4):
MD5 (Drive): C6FB3752A13BE99CC12E1A2F46416D8E
MD5 (Image): BC5DB284A3DB4F7EF1E694E9A675E6D4 [NOT MATCHED]
SHA1 (Drive): 5D6CD5AF8A44B7ECAAE9FE0180BD45AE3B829312
SHA1 (Image): 4FC974028D8A69423322229B5C51000EBBD8EFE1 [NOT MATCHED]
23:22:58 - Computed checksums on Drive Verbatim STORE N GO (Disk 4):
MD5 (Drive): C6FB3752A13BE99CC12E1A2F46416D8E
MD5 (Image): BC5DB284A3DB4F7EF1E694E9A675E6D4 [NOT MATCHED]
SHA1 (Drive): 5D6CD5AF8A44B7ECAAE9FE0180BD45AE3B829312
SHA1 (Image): 4FC974028D8A69423322229B5C51000EBBD8EFE1 [NOT MATCHED]
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
Can you tell why on the Zig Z1+ at least the rate of stales on Nicehash is really high?
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalksearch.org/topic/m.46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalksearch.org/topic/m.46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
Hello everyone,
Spamming is not my thing, so i'll try to keep it short
@Nlpool.nl we are running a profitswitching pool also running the Lyra2V2 algo and the most profitable Lyra2V2 coins in it, meaning you can set a BTC or LTC wallet , but also any other coin wallet as long as the coin is present in our pool.
As the pool can use some extra hashrate to make it even more efficiënt i am looking for people with the Z1 miners.
If you can help me out and if you are looking for some extra profit : > i can give you a 5% extra weekly bonus if you are a big miner for 4 weeks. If you are interested please contact me @ Discord or Telegram.
>>
NLPOOL.NL | Highly profitable Lyra2V2 Mining Pool
Start Mining:
Our features:
- Approximately 20 - 30% extra profits with custom finetuned profit switching system in the pool
- Payouts possible in any currency present in our pool (LTC / BTC / RACE / VTC etc.)
- High profits for miners by lowering latency and stale shares
- Blocks are distributed proportionally among valid submitted shares.
- High security / DDOS protection with 99% uptime, multiple nodes, loadbalancers and status system
- Professional pool - No un-announced downtime. We care for your profits.
- Hourly payments
- 0.25% fee
Support
Telegram - Telegram
Discord - Discord
Spamming is not my thing, so i'll try to keep it short
@Nlpool.nl we are running a profitswitching pool also running the Lyra2V2 algo and the most profitable Lyra2V2 coins in it, meaning you can set a BTC or LTC wallet , but also any other coin wallet as long as the coin is present in our pool.
As the pool can use some extra hashrate to make it even more efficiënt i am looking for people with the Z1 miners.
If you can help me out and if you are looking for some extra profit : > i can give you a 5% extra weekly bonus if you are a big miner for 4 weeks. If you are interested please contact me @ Discord or Telegram.
>>
NLPOOL.NL | Highly profitable Lyra2V2 Mining Pool
Start Mining:
Code:
-o stratum+tcp://mine.nlpool.nl:4533 -u-p c=x
- Approximately 20 - 30% extra profits with custom finetuned profit switching system in the pool
- Payouts possible in any currency present in our pool (LTC / BTC / RACE / VTC etc.)
- High profits for miners by lowering latency and stale shares
- Blocks are distributed proportionally among valid submitted shares.
- High security / DDOS protection with 99% uptime, multiple nodes, loadbalancers and status system
- Professional pool - No un-announced downtime. We care for your profits.
- Hourly payments
- 0.25% fee
Support
Telegram - Telegram
Discord - Discord
¡ tried three pools including this one.
nlpool gives 0.0003 btc for 10 hours
blockmasters gives 0.0005 btc for 10 hours
nicehash gives 0.0009 btc for 10 hours
champion is nicehash. it gives 2x and 3x more in same time period. do not waste your time and device.
Bro, do you have nicehash stocks??? i have been in contact with many miners since yesterday, and thrust me, there is no such thing as a pool paying 3 times as much as another pool. Margins are more likely to be a few percent at maximum.
First , the difficulty is going up enormously since these Z1 devices are oversold, causing more instability in rewards. This is not only on my pool , but on all pools since it takes longer time to find blocks. The difficulty for Monacoin has gone up a factor 10 since mid october to give you an example, where price has stayed more or less the same. Please feel free to check the data and put the graph on 3 months:
https://www.coinwarz.com/difficulty-charts/monacoin-difficulty-chart
If you are an expierenced miner you should know that if you want to say something reasonable that you have to test like 72 hours or so to get some decent data.
I just try to help people to get a part of their investment back .... as ROI seems impossible with profits of +/- 15 to 20 USD per day ex. power costs.
Is the 200watt extra worth the 0.6ghz? In some setups this might get temperatures to hot for some ppl...
But what is more interesting is that you claim 0930 software gives you 0.5 ghz for free? Can someone confirm?
But what is more interesting is that you claim 0930 software gives you 0.5 ghz for free? Can someone confirm?
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalksearch.org/topic/m.46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalksearch.org/topic/m.46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
For me its always a bit hard to get the usb formatted, but once this hapend and all partitions are gone , stick is clean, i can just write the image with the .exe provided and the miner works? Ow i always have to change the ip from the .1 to the .0 range again... but once that is done im back online im running the new firmware atm and it works. Strange thing is i cant format my usb with my desktop windows 10 but when i plug it in a old laptop it works... via dos. Cmd diskpart list disk select disk "x" clean.
EDIT: when i try in my desktop the usb apears and disapears again... when i try in an old laptop it stays sometimes 😂 maybe someone can provide me a better solution to clean the usb? Anyway once cleaned write is no issue
im running the new firmware atm and it works. Strange thing is i cant format my usb with my desktop windows 10 but when i plug it in a old laptop it works... via dos. Cmd diskpart list disk select disk "x" clean. EDIT: when i try in my desktop the usb apears and disapears again... when i try in an old laptop it stays sometimes 😂 maybe someone can provide me a better solution to clean the usb? Anyway once cleaned write is no issue
Add me to the list of people that cant get 1116 to mount or if it does mount the miner wont work. I have tried downloading image.usb from the passmark site and still have issues V1.4 and v1.3. Have tried multiple usbs and still no luck. I have even tried to remount old stored version i have saved on my pc and they wont mount either. It also appears to always be the same things that fail to verify.
23:22:58 - Computed checksums on Drive Verbatim STORE N GO (Disk 4):
MD5 (Drive): C6FB3752A13BE99CC12E1A2F46416D8E
MD5 (Image): BC5DB284A3DB4F7EF1E694E9A675E6D4 [NOT MATCHED]
SHA1 (Drive): 5D6CD5AF8A44B7ECAAE9FE0180BD45AE3B829312
SHA1 (Image): 4FC974028D8A69423322229B5C51000EBBD8EFE1 [NOT MATCHED]
23:22:58 - Computed checksums on Drive Verbatim STORE N GO (Disk 4):
MD5 (Drive): C6FB3752A13BE99CC12E1A2F46416D8E
MD5 (Image): BC5DB284A3DB4F7EF1E694E9A675E6D4 [NOT MATCHED]
SHA1 (Drive): 5D6CD5AF8A44B7ECAAE9FE0180BD45AE3B829312
SHA1 (Image): 4FC974028D8A69423322229B5C51000EBBD8EFE1 [NOT MATCHED]
Add me to the list of people that cant get 1116 to mount or if it does mount the miner wont work. I have tried downloading image.usb from the passmark site and still have issues V1.4 and v1.3. Have tried multiple usbs and still no luck. I have even tried to remount old stored version i have saved on my pc and they wont mount either. It also appears to always be the same things that fail to verify.
23:22:58 - Computed checksums on Drive Verbatim STORE N GO (Disk 4):
MD5 (Drive): C6FB3752A13BE99CC12E1A2F46416D8E
MD5 (Image): BC5DB284A3DB4F7EF1E694E9A675E6D4 [NOT MATCHED]
SHA1 (Drive): 5D6CD5AF8A44B7ECAAE9FE0180BD45AE3B829312
SHA1 (Image): 4FC974028D8A69423322229B5C51000EBBD8EFE1 [NOT MATCHED]
23:22:58 - Computed checksums on Drive Verbatim STORE N GO (Disk 4):
MD5 (Drive): C6FB3752A13BE99CC12E1A2F46416D8E
MD5 (Image): BC5DB284A3DB4F7EF1E694E9A675E6D4 [NOT MATCHED]
SHA1 (Drive): 5D6CD5AF8A44B7ECAAE9FE0180BD45AE3B829312
SHA1 (Image): 4FC974028D8A69423322229B5C51000EBBD8EFE1 [NOT MATCHED]
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalksearch.org/topic/m.46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalksearch.org/topic/m.46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
Jump to: