Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 22.

metnet

newbie

Activity: 69

Merit: 0

Quote from: mine_phun on November 14, 2018, 05:47:24 PM

Hello everyone,

Spamming is not my thing, so i'll try to keep it short

@Nlpool.nl we are running a profitswitching pool also running the Lyra2V2 algo and the most profitable Lyra2V2 coins in it, meaning you can set a BTC or LTC wallet , but also any other coin wallet as long as the coin is present in our pool.

As the pool can use some extra hashrate to make it even more efficiënt i am looking for people with the Z1 miners.

If you can help me out and if you are looking for some extra profit : > i can give you a 5% extra weekly bonus if you are a big miner for 4 weeks. If you are interested please contact me @ Discord or Telegram.

>>

NLPOOL.NL | Highly profitable Lyra2V2 Mining Pool

Start Mining:

Code:

-o stratum+tcp://mine.nlpool.nl:4533 -u  -p c=x

Our features:

- Approximately 20 - 30% extra profits with custom finetuned profit switching system in the pool
- Payouts possible in any currency present in our pool (LTC / BTC / RACE / VTC etc.)
- High profits for miners by lowering latency and stale shares
- Blocks are distributed proportionally among valid submitted shares.
- High security / DDOS protection with 99% uptime, multiple nodes, loadbalancers and status system
- Professional pool - No un-announced downtime. We care for your profits.
- Hourly payments
- 0.25% fee

Support
Telegram - Telegram
Discord - Discord

¡ tried three pools including this one.

nlpool gives 0.0003 btc for 10 hours
blockmasters gives 0.0005 btc for 10 hours
nicehash gives 0.0009 btc for 10 hours

champion is nicehash. it gives 2x and 3x more in same time period. do not waste your time and device.

lennujuht

newbie

Activity: 84

Merit: 0

Hi all! after installing the new firmware, using imageUSB.exe and following instructions ( it does not matter which versions) the miner is not identified.
https://imgur.com/uS2Pu34

What I am doing wrong? What flash_USB better to use? Should I additionally paste BIN file into the USB_flash drive? after installing I can not find BIN in new USB Drive.

Thanks in advance,
I really need to disable Fan function via new firmware Cry

hafez70

newbie

Activity: 4

Merit: 0

Which firmware is more stable right now ?!
Undecided

astraleureka

member

Activity: 236

Merit: 16

Literally how every miner ever has worked. Are you new here?

Pedram_01

newbie

Activity: 12

Merit: 0

Hi . Profits have been greatly reduced
It takes more than a year to recover capital

And every day it gets less. And that is very bad

Minerbunker

newbie

Activity: 5

Merit: 0

It is not per miner, 5.4mBTC / 2 miners = 2.7mBTC per miner

astraleureka

member

Activity: 236

Merit: 16

5.4 mBTC/day per miner is pretty good, considering the state of the market.

Minerbunker

newbie

Activity: 5

Merit: 0

Hello, I have been following this forum for a while. I have two Zig Z1 that were working fine up to firmware 0930. Last week I updated to 1105 thinking that it would go up to the proper profit level and the opposite happened. It went from .0065 BTC/ day to .0039 BTC/day. So I went back to the previous firmware and settings but couldn't make it work the same.
I was not able to bring them back to .006BTC/day, the higher they go up is .0054 BTC/day.
Now the same happened with this new firmware update 1116. Is it that this firmwares don't work at all? or why am I having so bad profits with these new firmwares.
@Zigminer Can you give us the optimal setting configuration for the new firmwares or explain why they doesn't work.

lennujuht

newbie

Activity: 84

Merit: 0

I have the same problem, but after installing new firmware unable to recognize miner (Error. your miner is not started yet)

https://imgur.com/uS2Pu34

Quote from: Mordred80 on November 16, 2018, 01:05:29 PM

It works!

Disabled the "Fan Check" on the Settings page and the miner is working again!

https://imgur.com/a/hCqtN28

Quote from: metnet on November 16, 2018, 03:50:47 AM

Quote from: Mordred80 on November 16, 2018, 01:54:08 AM

New firmware is out for Z1/Z1+, Version 20181116

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

Now i really hope that this option was added so that i can resume mining.

Quote from: zigminer on November 13, 2018, 09:46:47 AM

2018/11/16 will release new firmware , add fan check option.

did you try Mordred80. does it work?

Mordred80

jr. member

Activity: 70

Merit: 1

It works!

Disabled the "Fan Check" on the Settings page and the miner is working again!

https://imgur.com/a/hCqtN28

Quote from: metnet on November 16, 2018, 03:50:47 AM

Quote from: Mordred80 on November 16, 2018, 01:54:08 AM

New firmware is out for Z1/Z1+, Version 20181116

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

Now i really hope that this option was added so that i can resume mining.

Quote from: zigminer on November 13, 2018, 09:46:47 AM

2018/11/16 will release new firmware , add fan check option.

did you try Mordred80. does it work?

mine_phun

newbie

Activity: 208

Merit: 0

Please note , if still have a few seats left for 6 or 7 persons. As soon as we hit +/- 80 Gh i will close the 5% extra bonus rewards for new people, otherwise it will be to costly for me Roll Eyes

==============================================

Quote from: mine_phun on November 14, 2018, 05:47:24 PM

Hello everyone,

Spamming is not my thing, so i'll try to keep it short
@Nlpool.nl we are running a profitswitching pool with the Lyra2V2 algo and the most profitable Lyra2V2 coins in it, meaning you can set a BTC or LTC wallet , but also any other coin wallet as long as the coin is present in our pool.

As the pool can use some extra hashrate to make it even more efficiënt i am looking for people with the Z1 miners.

If you can help me out and if you are looking for some extra profit : > i can give you a 5% extra weekly bonus if you are a big miner for 4 weeks. If you are interested please contact me @ Discord or Telegram.

>>
NLPOOL.NL | Highly profitable Lyra2V2 Mining Pool

Start Mining:

Code:

-o stratum+tcp://mine.nlpool.nl:4533 -u  -p c=x

Our features:

- Approximately 20 - 30% extra profits with custom finetuned profit switching system in the pool
- Payouts possible in any currency present in our pool (LTC / BTC / RACE / VTC etc.)
- High profits for miners by lowering latency and stale shares
- Blocks are distributed proportionally among valid submitted shares.
- High security / DDOS protection with 99% uptime, multiple nodes, loadbalancers and status system
- Professional pool - No un-announced downtime. We care for your profits.
- Hourly payments
- 0.25% fee

Support
Telegram - Telegram
Discord - Discord

Phuripat

newbie

Activity: 26

Merit: 2

Quote

We are not dayun！
The stable frequency of z1 is 900Mhz
The stable frequency of z1+ is 925Mhz

User want only stable and get a full speed as describe and lower rejected rate.

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: metnet on November 16, 2018, 03:50:47 AM

Quote from: Mordred80 on November 16, 2018, 01:54:08 AM

New firmware is out for Z1/Z1+, Version 20181116

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

Now i really hope that this option was added so that i can resume mining.

Quote from: zigminer on November 13, 2018, 09:46:47 AM

2018/11/16 will release new firmware , add fan check option.

did you try Mordred80. does it work?

I did not try it yet cos i'm at work.
Have to wait ~8h till i'm home again.
Then i'll try.

metnet

newbie

Activity: 69

Merit: 0

Quote from: Mordred80 on November 16, 2018, 01:54:08 AM

New firmware is out for Z1/Z1+, Version 20181116

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

Now i really hope that this option was added so that i can resume mining.

Quote from: zigminer on November 13, 2018, 09:46:47 AM

2018/11/16 will release new firmware , add fan check option.

did you try Mordred80. does it work?

metnet

newbie

Activity: 69

Merit: 0

Quote from: zigminer on November 15, 2018, 11:21:02 AM

Quote from: mininghosting.eu on November 15, 2018, 04:55:31 AM

Dear Zigminer,

You posted screenshots you secretly took during a teamviewer session.

Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.

In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.

Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.

Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.

In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.

I hope you will enable SSH again, so we can use the newest firmware you provide.

Quote from: zigminer on November 14, 2018, 03:03:07 PM

Quote from: OmerSari on November 13, 2018, 10:28:39 AM

@zigminer,

I have 40 zig z1 miners.

In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.

Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.

Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.

The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.

I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.

I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.

https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2

After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79

you are right. thanks for new image. i want to check it, but it does not open.

zigminer

newbie

Activity: 19

Merit: 0

Quote from: OmerSari on November 15, 2018, 02:35:54 PM

You are talking about the fact that I can increase the clock speed to 1000. That's right, but if you see it, it's at 950 Wink

So we can overclock him up to 1000 but we didn't do it.

Ori, As you check all the machines from my laptop and took the screenshots you didn't saw any machine was overclocked to 1000 Wink

Beyond that you have it yourself on the google drive an image of 900_stable.
https://drive.google.com/drive/folders/1Z5vPZfQCwFsvYJwzzQ2kK_GUIMCA-YxS
Before you talk to me make sure you remove the overclock_900. Of those 50, I did not see Z1 get broken by overclock to 950!
https://imgur.com/a/qkyDzDk

Apart from that, Me and my colleagues have taken all care of what you all have not done: deliver a good software to a Dayun!

Quote from: zigminer on November 15, 2018, 11:21:02 AM

Quote from: mininghosting.eu on November 15, 2018, 04:55:31 AM

Dear Zigminer,

You posted screenshots you secretly took during a teamviewer session.

Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.

In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.

Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.

Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.

In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.

I hope you will enable SSH again, so we can use the newest firmware you provide.

Quote from: zigminer on November 14, 2018, 03:03:07 PM

Quote from: OmerSari on November 13, 2018, 10:28:39 AM

@zigminer,

I have 40 zig z1 miners.

In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.

Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.

Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.

The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.

I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.

I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.

https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2

After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79

We are not dayun！
The stable frequency of z1 is 900Mhz
The stable frequency of z1+ is 925Mhz

Mordred80

jr. member

Activity: 70

Merit: 1

New firmware is out for Z1/Z1+, Version 20181116

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

Now i really hope that this option was added so that i can resume mining.

Quote from: zigminer on November 13, 2018, 09:46:47 AM

2018/11/16 will release new firmware , add fan check option.

iwouldifiwereyou

newbie

Activity: 7

Merit: 0

Quote from: alexey14 on November 14, 2018, 11:17:47 AM

Should I buy Z?

Helll no, i hate it. Dropped from 50 a day to 18 the day I bought it. But I hate using it too, tweaking it and updating firmware has been a joke, then this locking out of SSH with later firmware.

OmerSari

newbie

Activity: 3

Merit: 0

You are talking about the fact that I can increase the clock speed to 1000. That's right, but if you see it, it's at 950 Wink

So we can overclock him up to 1000 but we didn't do it.

Ori, As you check all the machines from my laptop and took the screenshots you didn't saw any machine was overclocked to 1000 Wink

Beyond that you have it yourself on the google drive an image of 900_stable.
https://drive.google.com/drive/folders/1Z5vPZfQCwFsvYJwzzQ2kK_GUIMCA-YxS
Before you talk to me make sure you remove the overclock_900. Of those 50, I did not see Z1 get broken by overclock to 950!
https://imgur.com/a/qkyDzDk

Apart from that, Me and my colleagues have taken all care of what you all have not done: deliver a good software to a Dayun!

Quote from: zigminer on November 15, 2018, 11:21:02 AM

Quote from: mininghosting.eu on November 15, 2018, 04:55:31 AM

Dear Zigminer,

You posted screenshots you secretly took during a teamviewer session.

Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.

In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.

Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.

Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.

In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.

I hope you will enable SSH again, so we can use the newest firmware you provide.

Quote from: zigminer on November 14, 2018, 03:03:07 PM

Quote from: OmerSari on November 13, 2018, 10:28:39 AM

@zigminer,

I have 40 zig z1 miners.

In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.

Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.

Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.

The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.

I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.

I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.

https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2

After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79

Yezzzuurrr

newbie

Activity: 37

Merit: 0

Does a higher freq really gives you a better result anyway?
Are you gonna make a place where we can buy spare parts for this miner when things go wrong?

Quote from: zigminer on November 15, 2018, 11:21:02 AM

Quote from: mininghosting.eu on November 15, 2018, 04:55:31 AM

Dear Zigminer,

You posted screenshots you secretly took during a teamviewer session.

Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.

In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.

Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.

Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.

In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.

I hope you will enable SSH again, so we can use the newest firmware you provide.

Quote from: zigminer on November 14, 2018, 03:03:07 PM

Quote from: OmerSari on November 13, 2018, 10:28:39 AM

@zigminer,

I have 40 zig z1 miners.

In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.

Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.

Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.

The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.

I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.

I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.

https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2

After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 22. (Read 42511 times)