Anyone knows what that yellow light "unit err" means on the front of the machine?
check it zig 1 getting ip or not.if not solve it that get ip first. if you can not solve any how you can reset it with toothpick
Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 24. (Read 42511 times)
if not solve it that get ip first. if you can not solve any how you can reset it with toothpick
Anyone knows what that yellow light "unit err" means on the front of the machine?
We have now discontinued z1 and z1+.
ensure mining difficult not grow.
2018/11/16 will release new firmware , add fan check option.
ensure mining difficult not grow.
2018/11/16 will release new firmware , add fan check option.
these are two good news. thanks a lot. @zigminer founder
@zigminer,
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
@OmerSari
Hi
on the Z1/Z1+ you can try to enable SSH by doing this :
mount the usb and access the filesystem :
edit
/etc/ssh/sshd_config
remove # from
#PasswordAuthentication yes
then save the file.
then boot up and try SSH login.
please let us know your results.
Yes we tried, even listen=0.0.0.0 was #listen=0.0.0.0 didn't solve. I think its in the encypted partition of the USB drive
@zigminer,
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
@OmerSari
Hi
on the Z1/Z1+ you can try to enable SSH by doing this :
mount the usb and access the filesystem :
edit
/etc/ssh/sshd_config
remove # from
#PasswordAuthentication yes
then save the file.
then boot up and try SSH login.
please let us know your results.
It will be interesting to see if they hold true to their word on not selling more Z1/+. If they do, good for them for being a responsible manufacturer - more vendors should take this path.
Good practice to not oversell miners @zigminer!
Hi every one!
Can some one introduce a good pool for lyra2ver2 algorithm ?
and also can you help me about https://miningpoolstats.stream/
what is it ? how can it help me out to find out pool state ?!
thanks
Can some one introduce a good pool for lyra2ver2 algorithm ?
and also can you help me about https://miningpoolstats.stream/
what is it ? how can it help me out to find out pool state ?!
thanks
@zigminer,
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
We have now discontinued z1 and z1+.
ensure mining difficult not grow.
2018/11/16 will release new firmware , add fan check option.
ensure mining difficult not grow.
2018/11/16 will release new firmware , add fan check option.
Z1+ 2180$
Ready ship from alibaba
Mine was 5300 EUR
Ready ship from alibaba
Mine was 5300 EUR
Be careful who you deal with through Alibaba...I was offered a new Z1+, PSU with shipping to South Africa for $1000. This business is from Turkey. When I went through their advertising pages in Alibaba it showed a granite business. I played along and asked the guy to send me a purchase invoice(PI). When I received it I checked the address on on google maps and it took me to a cellphone shop in Istanbul. As that old saying goes, ‘If something is too good to be true, it probably is’
Deal with suppliers someone on this chat group has dealt with else don’t take a chance cos you are good as gambling, with all the odds stacked against you
I live in Turkey and I bought dayun from here. The lowest 2nd hand price is now 3100 USD. If anyone says 1000 usd. DO NOT BUY. Thats it. Because you will not be able to get your dayun.
Hey
Yes i did that.
If i switch the fans it still shows that the out fan has 0 RPM.
So im sure it's the controller board and not the fan.
Yes i did that.
If i switch the fans it still shows that the out fan has 0 RPM.
So im sure it's the controller board and not the fan.
Did you switched the 2 fans and checked if the fan in shows 0 rpm then? I see zigminer says its the fan that is the problem? I think its the controler unit but you could easily check it on this way
You have a date for this?
My miner stoped working 10 days ago bcuz of this problem.
It shows 0 RPM for the out fan but the fan if turning at full speed.
Regarding fan detection, the next version will be added to fan speed check
You have a date for this?
My miner stoped working 10 days ago bcuz of this problem.
It shows 0 RPM for the out fan but the fan if turning at full speed.
Did you switched the 2 fans and checked if the fan in shows 0 rpm then? I see zigminer says its the fan that is the problem? I think its the controler unit but you could easily check it on this way
You have a date for this?
My miner stoped working 10 days ago bcuz of this problem.
It shows 0 RPM for the out fan but the fan if turning at full speed.
Regarding fan detection, the next version will be added to fan speed check
You have a date for this?
My miner stoped working 10 days ago bcuz of this problem.
It shows 0 RPM for the out fan but the fan if turning at full speed.
Z1+ 2180$
Ready ship from alibaba
Mine was 5300 EUR
Ready ship from alibaba
Mine was 5300 EUR
Be careful who you deal with through Alibaba...I was offered a new Z1+, PSU with shipping to South Africa for $1000. This business is from Turkey. When I went through their advertising pages in Alibaba it showed a granite business. I played along and asked the guy to send me a purchase invoice(PI). When I received it I checked the address on on google maps and it took me to a cellphone shop in Istanbul. As that old saying goes, ‘If something is too good to be true, it probably is’
Deal with suppliers someone on this chat group has dealt with else don’t take a chance cos you are good as gambling, with all the odds stacked against you
Z1+ 2180$
Ready ship from alibaba
Mine was 5300 EUR
Ready ship from alibaba
Mine was 5300 EUR
Regarding fan detection, the next version will be added to fan speed check
You have a date for this?
My miner stoped working 10 days ago bcuz of this problem.
It shows 0 RPM for the out fan but the fan if turning at full speed.
I am the founder of zigminer, dayun is just one of our sellers (Z1), and now has no contact with zigminer.
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
Are you planning to do some arrange for Z1 profits soon?
New algo adding? or new coins? etc.
Dear founder of zigminer, @zigminer
nice to see you here.
would you please help us.
we need overclock. because i think z1 has a oc potential to make it higher.
i saw 50 gh hashrate but it is for one minute.
we need if possible to mine different algo.
would you please when you publish new image, put a release notes as a infomation file.
thanks in advance.
nice to see you here.
would you please help us.
we need overclock. because i think z1 has a oc potential to make it higher.
i saw 50 gh hashrate but it is for one minute.
we need if possible to mine different algo.
would you please when you publish new image, put a release notes as a infomation file.
thanks in advance.
What is better pool? prohash or nicehash? or no differance 
@zigminer Is the new algorithm possible for Z1 in the future?
very good question otherwise we are in trouble. Jump to: