@zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 26. (Read 42511 times)
If you look back through this post you will see previous versions didn't update the temps shown. So it was reaching 58 but wasn't showing it.
I am really interested in this ASIC as it will be my first and it really does seem legit but after this thread, I am not so sure.
Other than Amazon is there anywhere else I could buy it? I want to buy at least 5 or more to make a decent profit.
I visited the so-called official site of the machine. It cost a lot less there because they claim that they buy straight from the manufacturer
http://www.dayunmining.com/product/zig-z1/
It is a lot cheaper there and sometimes I see the Zig on sale and cost even less. They claim they only take BITCOIN because it is more secure that way. Do not get me wrong I am all for wanting to use Bitcoin as currency but honestly, it seems like a way to make sure they do not get caught scamming.
Does anyone have any opinion of this site or can tell me where to legit get a Zig to try for myself?
Other than Amazon is there anywhere else I could buy it? I want to buy at least 5 or more to make a decent profit.
I visited the so-called official site of the machine. It cost a lot less there because they claim that they buy straight from the manufacturer
http://www.dayunmining.com/product/zig-z1/
It is a lot cheaper there and sometimes I see the Zig on sale and cost even less. They claim they only take BITCOIN because it is more secure that way. Do not get me wrong I am all for wanting to use Bitcoin as currency but honestly, it seems like a way to make sure they do not get caught scamming.
Does anyone have any opinion of this site or can tell me where to legit get a Zig to try for myself?
If you are keen to get one or more of these machines, try AKMiner.com as got mine from them. The owner Joyson is very friendly and accommodating and will help you with the price, shipping and customs. I don’t have any vested interest in this company , just trying to help those looking for a reliable supplier. I got my delivery 3 days after my order was finalized.
@zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
Quote from: link=topic=5038441.msg47639287#msg47639287 date=1541503365
Hi,
I'm confused .. which is the right webpage to order the Miner direct from china / manufacturer ?
http://www.dayunmining.com/
Looks like scam - price too low, no ssl - bad appearance
https://www.zigminer.com/
Looks better but no option to order something (I mailed them ... no answer till now)
https://dayun.company/
Looks best, complete order / account system, price looks legit
Anyone could help here ... ?
Thanks
I'm confused .. which is the right webpage to order the Miner direct from china / manufacturer ?
http://www.dayunmining.com/
Looks like scam - price too low, no ssl - bad appearance
https://www.zigminer.com/
Looks better but no option to order something (I mailed them ... no answer till now)
https://dayun.company/
Looks best, complete order / account system, price looks legit
Anyone could help here ... ?
Thanks
OK - my personal opinion here is , stay away from https://dayun.company a quick reverse lookup shows:
Host Name for 94.130.219.239
Host Name: davs.2sz.ru
Dayunmining.com is located in USA !?
107.180.50.231
Scottsdale, Arizona, United States
Price is too low compared to most offers - looks also like scam
I hat some emails with ZIGMiner - they answer short but I can't tell if they are legit. They offer to sell miner for ¥30000 including shipping. Looks like they don'T do this often - there is no shop system nor do they have any contract for international shipment. But If I dare I could offer there. Right now I don't - too often I burned in the crypto flames ...
but ... they also use a rented VPS ?! :
Host Name for 149.28.91.238
Host Name: 149.28.91.238.vultr.com
no luck here ?
Regards
Hi, I bought my Z1+ from AKMiner.com. Very good service and price
@zigminer
Could you please add fan speed control? I dont need them to run at 100%. Make it possible to scale it down to 50%.
And please do something about the stale shares...
Could you please add fan speed control? I dont need them to run at 100%. Make it possible to scale it down to 50%.
And please do something about the stale shares...
how to overclock. we are seeing sometimes incredible gigahash rate for example 50 gh.
zigminer said here that it can't overclock https://askmona.org/3738#res_245why do you put phpbash file in image. this hacking tool.
do you know it. would you please make it secure.
I'd expect you should be able to mount the drive and remove it yourself anyway instead of waiting for them to?do you know it. would you please make it secure.
i can make it. i did it. but others... i hear everyday two or more people hacked who have zig. is it normal?
@zigminer
Can u give us the max temp and the average of core and chip
thanks
Can u give us the max temp and the average of core and chip
thanks
how to overclock. we are seeing sometimes incredible gigahash rate for example 50 gh.
zigminer said here that it can't overclock https://askmona.org/3738#res_245why do you put phpbash file in image. this hacking tool.
do you know it. would you please make it secure.
I'd expect you should be able to mount the drive and remove it yourself anyway instead of waiting for them to? do you know it. would you please make it secure.
I am considering to sale my Zig Z1+. I have it running pretty smooth with no errors at full 925MHZ. It runs for days non stop and I don't have to reboot it. If anyone is interested message me your direct contact details. USA residents only. No international shipping.
Zig Z1+ FOR SALE 2.5K (USD or BTC) plus shipping.
View pictures here:
https://ibb.co/bOjHxq
https://ibb.co/iBJD3V
https://ibb.co/nhN6OV
Zig Z1+ FOR SALE 2.5K (USD or BTC) plus shipping.
View pictures here:
https://ibb.co/bOjHxq
https://ibb.co/iBJD3V
https://ibb.co/nhN6OV
to zigminer founder @zigminer
why do you put phpbash file in image. this hacking tool.
most of zig machine hacked everyday. somebodies enter the machine and change pool and/or wallet address.
do you know it. would you please make it secure.
why do you release too much new images. where is changelog file of them.
we would like to know what changes.
why do you put phpbash file in image. this hacking tool.
most of zig machine hacked everyday. somebodies enter the machine and change pool and/or wallet address.
do you know it. would you please make it secure.
why do you release too much new images. where is changelog file of them.
we would like to know what changes.
I am the founder of zigminer, dayun is just one of our sellers (Z1), and now has no contact with zigminer.
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
if you are the founder would please give us about zigminer cgminer.conf details for example how to arrange fan speed,
how to overclock. we are seeing sometimes incredible gigahash rate for example 50 gh.
give us help. because we paid 5-6000 usd around for 40-60 usd profit. after one week profit fell 20 usd/daily in one day.
roi is now 250-300 days. do you care about customer who bought your machines.
We found some fake z1+ products.
If updating to the latest firmware can't be tapped, it's fake.
Simple and quick way to judge.
If updating to the latest firmware can't be tapped, it's fake.
Simple and quick way to judge.
And why is the FAN OUT showing 0 RPM and the miner stops working even if the fan is still running?
If the fan fails to detect the speed, it is decided to be a fan fault.
And why can't we disable the FAN CHECK so that we can continue mining?
Fan failure, high temperature will damage hashboard
And why don't you release a firmware where we can disable the FAN CHECK?
Next version, we are considering adding this feature.
And why is the hashrate to low and so unstable?
Try to reduce frequency. Some businesses have modified the firmware of Z1, counterfeiting z1+.
And why can't we find/buy hashboards?
We are trying to improve the official website pages as far as possible, and will sell spare parts later.
And why is there so much junk in the firmware?
specific?
If the fan fails to detect the speed, it is decided to be a fan fault.
And why can't we disable the FAN CHECK so that we can continue mining?
Fan failure, high temperature will damage hashboard
And why don't you release a firmware where we can disable the FAN CHECK?
Next version, we are considering adding this feature.
And why is the hashrate to low and so unstable?
Try to reduce frequency. Some businesses have modified the firmware of Z1, counterfeiting z1+.
And why can't we find/buy hashboards?
We are trying to improve the official website pages as far as possible, and will sell spare parts later.
And why is there so much junk in the firmware?
specific?
And why is the FAN OUT showing 0 RPM and the miner stops working even if the fan is still running?
And why can't we disable the FAN CHECK so that we can continue mining?
And why don't you release a firmware where we can disable the FAN CHECK?
And why is the hashrate to low and so unstable?
And why can't we find/buy hashboards?
And why is there so much junk in the firmware?
And so on...
And why can't we disable the FAN CHECK so that we can continue mining?
And why don't you release a firmware where we can disable the FAN CHECK?
And why is the hashrate to low and so unstable?
And why can't we find/buy hashboards?
And why is there so much junk in the firmware?
And so on...
If you are the founder of Zigminer then perhaps you can shine some light onto why it seems most people on this forum struggle to get the hash rate the miners is sold as being able to achieve? And also why the miners are so up and down in their hash rate?
I am the founder of zigminer, dayun is just one of our sellers (Z1), and now has no contact with zigminer.
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
If you are the founder of Zigminer then perhaps you can shine some light onto why it seems most people on this forum struggle to get the hash rate the miners is sold as being able to achieve? And also why the miners are so up and down in their hash rate?
I am the founder of zigminer, dayun is just one of our sellers (Z1), and now has no contact with zigminer.
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
I am the founder of zigminer, dayun is just one of our sellers (Z1), and now has no contact with zigminer.
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
Is there a way to change the ip to the .0 range instead of the .1 range before i put a new usb firmware in it? My miner is in a .0 homenetwork and when i write new firmware to the usb its default back in the .1 . So maybe i can change it on the usb in some file before i plug it in
Or should i copy my original usb into my new usb and then update via the dashboard? I want to keep my original usb as backup and use a new one..
Or should i copy my original usb into my new usb and then update via the dashboard? I want to keep my original usb as backup and use a new one..
Is there any way to tone down the fan a bit?
Otherwise, with the new firmware, I still get stall shares on nicehash. In general 6.8GH hashrate on average.
Otherwise, with the new firmware, I still get stall shares on nicehash. In general 6.8GH hashrate on average.
I take that back. Suddenly stales all over the place and dropping hashrates... How often do you restart the miner? Every x hours? I can set my smartplug to do that.
Alibaba vendors do not sell hushboars of Zig Z1.
They all respond: Sorry,we don't sell hashboards.
I would very happy, is somebody help me where I can get hashboards.
They all respond: Sorry,we don't sell hashboards.
I would very happy, is somebody help me where I can get hashboards.
the "no problem / sorry" pattern is the most typical Chinese traders behavior!
The point is that manufacturer under no circumstances sell spare hash-boards without returning the full defective unit;
they only manage replacements as they DO NOT own an equipped lab for repairs;
So, the only option is claiming warranty to your vendor by sending back the full unit;
Upon receive from you, the vendor ship the miner to DaYun that should replace the faulty boards, provided that have not been burned out by overclocking, surge or else... but as they are definitely unable to understand the failure cause, the decision in totally arbitrary!
Looks to be big challenge even for Chinese customers, good luck mate!
FYI, my CN partner investigated and explained the whole workflow:
1) the ASIC chips and PCBs (main / hash boards) are produced by a well known high-tech factory in Shenzhen area;
2) the DaYun manufacturer (most likely based in NingBo) is a very small company just managed to buy and assemble the raw material, develop firmware (maybe...) and distribute the end product to the myriad of vendors mostly located (again) in Shenzhen...
3) the vendors are the only "official" distribution channel and they all signed an agreement with DaYun to not unveil their identity!
/E
Interesting, that would explain why the vendors are hosting the firmware updates.
Any idea about the Nov 1 story?
this mostly explains why DaYun don't have any direct contact with their customers.
Simply they lack of staff and resources to manage anything else then assemble pre-built parts, pile packs on pallets and handle domestic shippings to their vendors net.
This commercial decentralization also facilitates the proliferation of confusion, scammers and fake info...
Nov 1 story? Halloween joke of course, a CN version of April Fool :-)
Alibaba vendors do not sell hushboars of Zig Z1.
They all respond: Sorry,we don't sell hashboards.
I would very happy, is somebody help me where I can get hashboards.
They all respond: Sorry,we don't sell hashboards.
I would very happy, is somebody help me where I can get hashboards.
the "no problem / sorry" pattern is the most typical Chinese traders behavior!
The point is that manufacturer under no circumstances sell spare hash-boards without returning the full defective unit;
they only manage replacements as they DO NOT own an equipped lab for repairs;
So, the only option is claiming warranty to your vendor by sending back the full unit;
Upon receive from you, the vendor ship the miner to DaYun that should replace the faulty boards, provided that have not been burned out by overclocking, surge or else... but as they are definitely unable to understand the failure cause, the decision in totally arbitrary!
Looks to be big challenge even for Chinese customers, good luck mate!
FYI, my CN partner investigated and explained the whole workflow:
1) the ASIC chips and PCBs (main / hash boards) are produced by a well known high-tech factory in Shenzhen area;
2) the DaYun manufacturer (most likely based in NingBo) is a very small company just managed to buy and assemble the raw material, develop firmware (maybe...) and distribute the end product to the myriad of vendors mostly located (again) in Shenzhen...
3) the vendors are the only "official" distribution channel and they all signed an agreement with DaYun to not unveil their identity!
/E
Interesting, that would explain why the vendors are hosting the firmware updates.
Any idea about the Nov 1 story?
Jump to: