Devcoin - page 117. | Bitcointalksearch.org

Icoin

hero member

Activity: 585

Merit: 501

Quote from: Unthinkingbit on January 03, 2013, 02:31:38 PM

Quote from: jasinlee on December 07, 2012, 12:27:44 AM

Tested Devda.ch It does function to receive dvc and send. Waiting on final confirmation for the send. Please send the generation share for the review there below also to ensure that the gen shares can be sent to this web wallet.

1K3kn5xoQfyCnzgaFNTLLpVQBdRVpwwgNx

The account was lost, so the coins sent there were lost. Another test will be made in round 19.

The coins arnt lost at all! The first wallet is D6 compatible. Since devda.ch had to made an upgrade to D7 cause of the opensimulator integration the needed modules had to be made first! The "D6 Wallet" is stil present, and the funds will be loaded to jasinlee's account on devda.ch (I wrote him some days ago to create a new Account). By now there are 56250 DVC present http://www.devda.ch:2750/address/1K3kn5xoQfyCnzgaFNTLLpVQBdRVpwwgNx. It would be great to inform me that you plan of a lontherm test. As far i understand it the test started with the D6 Wallet Module originaly coded by M0ray and adjusted to Devcoin (published). today devda.ch runs with the new D7 module coded by SSM2017 on the basis of bitcoin-php coded by Mike Gogulski.

Unthinkingbit

hero member

Activity: 935

Merit: 1015

Quote from: AmDD on January 03, 2013, 02:21:57 PM

Is this something I'll need to do every so often? Or is it a one time thing?

The problem might be because this page is down:
http://devcoinblockexplorer.info/receiver/receiver_18.csv

and indeed the entire site is down. However, devcoin should time out in about 30 seconds and reload the other two receiver pages, so I don't really know why it's not working. In any case, if:
http://devcoinblockexplorer.info

is not up within four days, I'll ask Jasinlee to take over the third receiver file, and everything should eventually work.

jasinlee

hero member

Activity: 742

Merit: 500

Its as easy as 0, 1, 1, 2, 3

Quote from: Unthinkingbit on January 03, 2013, 02:31:38 PM

Quote from: jasinlee on December 07, 2012, 12:27:44 AM

Tested Devda.ch It does function to receive dvc and send. Waiting on final confirmation for the send. Please send the generation share for the review there below also to ensure that the gen shares can be sent to this web wallet.

1K3kn5xoQfyCnzgaFNTLLpVQBdRVpwwgNx

The account was lost, so the coins sent there were lost. Another test will be made in round 19.

I setup a new account and awaiting the next test to confirm devda.ch.

K1773R

legendary

Activity: 1792

Merit: 1008

/dev/null

Quote from: AmDD on January 03, 2013, 02:21:57 PM

Is this something I'll need to do every so often? Or is it a one time thing?

if it wont fetch the new ones automatically u have to do this every 4k blocks.

Unthinkingbit

hero member

Activity: 935

Merit: 1015

Quote from: jasinlee on December 07, 2012, 12:27:44 AM

Tested Devda.ch It does function to receive dvc and send. Waiting on final confirmation for the send. Please send the generation share for the review there below also to ensure that the gen shares can be sent to this web wallet.

1K3kn5xoQfyCnzgaFNTLLpVQBdRVpwwgNx

The account was lost, so the coins sent there were lost. Another test will be made in round 19.

AmDD

legendary

Activity: 1027

Merit: 1005

Is this something I'll need to do every so often? Or is it a one time thing?

Icoin

hero member

Activity: 585

Merit: 501

Quote

I have tried to install the windows version of the Devcoin wallet and have failed at some point. It will open and start downloading blocks but stops at 71999 even tho I still have connections. Ive deleted everything and tried again but it still stops at the same 71999 block. What did I do wrong?

You didnt do nothing wrong you simply forgot to add the cvs files to ./devcoin/receiver - get all cvs files here : http://92.105.105.155/devcoin/ and copy them to your ./devcoin/receiver folder and restart the daemon

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Try grabbing from http://sourceforge.net/projects/galacticmilieu/files/DeVCoin/

AmDD

legendary

Activity: 1027

Merit: 1005

Quote from: Atruk on January 03, 2013, 12:03:47 PM

Quote from: AmDD on January 03, 2013, 06:55:22 AM

I have tried to install the windows version of the Devcoin wallet and have failed at some point. It will open and start downloading blocks but stops at 71999 even tho I still have connections. Ive deleted everything and tried again but it still stops at the same 71999 block. What did I do wrong?

Try putting the Round 18 reciever file in your directory. There's a link on a post in page 58 of this thread.

Will try it. Im still trying to figure out how exactly this works...

Atruk

hero member

Activity: 700

Merit: 500

Quote from: AmDD on January 03, 2013, 06:55:22 AM

I have tried to install the windows version of the Devcoin wallet and have failed at some point. It will open and start downloading blocks but stops at 71999 even tho I still have connections. Ive deleted everything and tried again but it still stops at the same 71999 block. What did I do wrong?

Try putting the Round 18 reciever file in your directory. There's a link on a post in page 58 of this thread.

AmDD

legendary

Activity: 1027

Merit: 1005

I have tried to install the windows version of the Devcoin wallet and have failed at some point. It will open and start downloading blocks but stops at 71999 even tho I still have connections. Ive deleted everything and tried again but it still stops at the same 71999 block. What did I do wrong?

Icoin

hero member

Activity: 585

Merit: 501

Drupal 7 Devcoin Wallet module used by devda.ch published by ssm2017

https://drupal.org/project/coins_wallet

Quote

This drupal module is a wallet system to be used with a devcoin daemon or whatever daemon system compatible with bitcoin.

The original Drupal 6 module made by m0Ray was not relased.
Here is the link to the discussion : http://drupal.org/node/1030762

This module is a complete rewrite for drupal 7 using bitcoin-php library.

Here is the link to the library used inside this code : https://github.com/mikegogulski/bitcoin-php

This code was made with the help of http://devda.ch that gave me the idea to make it and debug it.

http://www.glari.ch:3000/attachments/download/46/coins-walletadmin.png

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Quote from: markm on December 24, 2012, 02:23:13 AM

Depends on version of Mini UPNP, its old code so wants old version.

If you've installed newer version the newer bitcoin versions use then yeah turn it off or figure out how to have two versions on your machine at once. (Or maybe make a virtual machine with old stuff to compile old stuff on and compile it statically, or whatever).

-MarkM-

Disabled UPNP and it works. I not need it, easier to manage open ports via router

markm

legendary

Activity: 2940

Merit: 1090

Depends on version of Mini UPNP, its old code so wants old version.

If you've installed newer version the newer bitcoin versions use then yeah turn it off or figure out how to have two versions on your machine at once. (Or maybe make a virtual machine with old stuff to compile old stuff on and compile it statically, or whatever).

-MarkM-

K1773R

legendary

Activity: 1792

Merit: 1008

/dev/null

Quote from: rav3n_pl on December 24, 2012, 01:39:52 AM

git version is not compiling:

Code:

rav3n@rav3n:~/old-devcoind/src$ make -f makefile.unix bitcoind
g++ -c -O3 -mtune=generic -march=native -Wno-invalid-offsetof -Wformat  -DNOPCH -DFOURWAYSSE2 -DUSE_SSL -DUSE_UPNP=0 -o obj/nogui/net.o net.cpp
In file included from headers.h:93:0,
                 from net.cpp:5:
util.h: In function ‘void ExitThread(unsigned int)’:
util.h:653:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
net.cpp: In function ‘void ThreadMapPort2(void*)’:
net.cpp:1076:63: error: too few arguments to function ‘UPNPDev* upnpDiscover(int, const char*, const char*, int, int, int*)’
In file included from net.cpp:23:0:
/usr/include/miniupnpc/miniupnpc.h:57:1: note: declared here
net.cpp:1090:58: error: too few arguments to function ‘int UPNP_AddPortMapping(const char*, const char*, const char*, const char*, const char*, const char*, const char*, const char*, const char*)’
In file included from net.cpp:24:0:
/usr/include/miniupnpc/upnpcommands.h:117:1: note: declared here
make: *** [obj/nogui/net.o] Error 1
rav3n@rav3n:~/old-devcoind/src$

append USE_UPNP= after make

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

git version is not compiling:

Code:

rav3n@rav3n:~/old-devcoind/src$ make -f makefile.unix bitcoind
g++ -c -O3 -mtune=generic -march=native -Wno-invalid-offsetof -Wformat  -DNOPCH -DFOURWAYSSE2 -DUSE_SSL -DUSE_UPNP=0 -o obj/nogui/net.o net.cpp
In file included from headers.h:93:0,
                 from net.cpp:5:
util.h: In function ‘void ExitThread(unsigned int)’:
util.h:653:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
net.cpp: In function ‘void ThreadMapPort2(void*)’:
net.cpp:1076:63: error: too few arguments to function ‘UPNPDev* upnpDiscover(int, const char*, const char*, int, int, int*)’
In file included from net.cpp:23:0:
/usr/include/miniupnpc/miniupnpc.h:57:1: note: declared here
net.cpp:1090:58: error: too few arguments to function ‘int UPNP_AddPortMapping(const char*, const char*, const char*, const char*, const char*, const char*, const char*, const char*, const char*)’
In file included from net.cpp:24:0:
/usr/include/miniupnpc/upnpcommands.h:117:1: note: declared here
make: *** [obj/nogui/net.o] Error 1
rav3n@rav3n:~/old-devcoind/src$

edit:
# use_upnp=
and it works ;]

markm

legendary

Activity: 2940

Merit: 1090

It is on GitHub: https://github.com/knotwork/old-devcoind

So is the devcoin-qt: https://github.com/knotwork/old-devcoin-qt

I called them "old" because I wanted to take a newer bitcoin version as base to start making "new" versions of them.

Also, you do not have to put the receiver files into ~/.devcoin/receiver directory, they can actually be anywhere at all if you simply change directory to wherever they are before you run the program (the devcoind or devcoin-qt program). It will notice them and copy them over itself into the "receiver" subdir of the datadir.

Another way of saying the same thing is to say if they are not in the devcoin data dir's "receiver" subdir then they must be in the so called "present working directory" of the program when you run the program.

Thus putting them in ~/devcoin should have worked fine IF you had been "sitting in" ~/devcoin when you ran the program.

-MarkM-

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Yes, i make ~./devcoin/receiver folder and put files in there.
I do it after I saw error message that tells me that file/s are missing there.
Deleted blk* __db* and database folder and it start downloading blocks

I also accept incomming connections now

I see in log

Code:

version message: version 32501

is there updated version somewhere?
And why it is not on github? It would be much easier than search for tar/gzips.

K1773R

legendary

Activity: 1792

Merit: 1008

/dev/null

Quote from: rav3n_pl on December 24, 2012, 12:20:31 AM

I have compiled DVC from
http://sourceforge.net/projects/galacticmilieu/files/DeVCoin/
I copied all receiver files from source directory.
I started daemon and get:

Code:

rav3n@rav3n:~$ devcoind getinfo
{
    "version" : 32400,
    "balance" : 0.00000000,
    "blocks" : 0,
    "connections" : 8,
    "proxy" : "",
    "generate" : false,
    "genproclimit" : -1,
    "difficulty" : 1.00000000,
    "hashespersec" : 0,
    "testnet" : false,
    "keypoololdest" : 1356278518,
    "paytxfee" : 0.00000000,
    "errors" : "WARNING: Displayed transactions may not be correct!  You may need to upgrade, or other nodes may need to  upgrade."
}

Blocks are not downloading?
In log I see

Code:

got inventory: block 00000000b8a349531336  have

so looks like I have some chunk of chain.
I have wrong version or what?

u have to create a folder receiver and put the csv files in there, not into ~/.devcoin

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

I have compiled DVC from
http://sourceforge.net/projects/galacticmilieu/files/DeVCoin/
I copied all receiver files from source directory.
I started daemon and get:

Code:

rav3n@rav3n:~$ devcoind getinfo
{
    "version" : 32400,
    "balance" : 0.00000000,
    "blocks" : 0,
    "connections" : 8,
    "proxy" : "",
    "generate" : false,
    "genproclimit" : -1,
    "difficulty" : 1.00000000,
    "hashespersec" : 0,
    "testnet" : false,
    "keypoololdest" : 1356278518,
    "paytxfee" : 0.00000000,
    "errors" : "WARNING: Displayed transactions may not be correct!  You may need to upgrade, or other nodes may need to  upgrade."
}

Blocks are not downloading?
In log I see

Code:

got inventory: block 00000000b8a349531336  have

so looks like I have some chunk of chain.
I have wrong version or what?

Topic: Devcoin - page 117. (Read 412954 times)