Topic: [DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 24. (Read 53273 times)

Have to open up and see the mobo in detail - perhaps philip or eliovp can comment since they deep dive on the Pandaminers guts and insides.

Are Panda miners hanging itself ?
I assume pandaminer has normal motherboard ? or not ?
If you have Power button and Power led then propably there are those pins
Anyway  opening pandaminer could result in warranty loose ?

Well this project is well worth it for you and also the mining community.
Overtime, I hope you can continue to improve it so that it's as easy and point and click to manage multiple GPU rigs.... and maybe others too.

I am wondering how to make use of SRR on the Pandaminers.... anyone has opened the Panda and checked if the pins are available for SRR?

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

Ofcourse SimpleMining OS will have installed utility and options in web interface to manage SRR
It will be implemented  in next 2 weeks
5 min cooldown, yes. Some rigs wont turn on after problem right away and there are need to be turned off for few minutes.
This option is already programmes and its called LONG REBOOT

No problem, All windows and linux are supported !



Also:

SimpleRigResetter (SRR) pros over other solutions:
- propably cheaper when using more than 3-8 rigs. Even more cheaper it wil be with SRR + Extension Board for addonitional 24 Rigs . (then cost per rig will be about 10$ in 32 rigs enviroment)
- auto rebooting - programmed tools and scripts which will auto reboot hanged rigs VS manual clicking in PDU/APC (or scripting but someone must have skills and time)
- no power limitation like in PDU/APC which can give average max of ~3000 W - so max 3-4 rigs connected to one APC - thats becasue SRR doesnt transfer any 120/240V power.
- rigs isolation - if ther will be something with rig, rest rigs wont suffer from it via my device due to opti transistors (there is no phisical connection between rigs)
- turning ON feature which accually can tun ON rig obiously But is you dont have set "turn ON on power restore" or sometimes when you shutdown rig or simply bug in motherboard firmware - then rig wont turn ON automatically in other solutions.
In mine, SRR can read POWER LED is it ON or OFF and can Power ON and OFF rig via normal traditional "Power button behavior"
- you can check status of all rigs (is it turned ON/OFF) on one page.
- for big farms like 100+ rigs there is fewer devices to be managed. SRR+2 Extenstion boards can manage 56 rigs while other solutions can manage up to 4-10 max

This is great i already did a preorder so.. lets see.

I am using ethos and i would love to conect them and work like  one device and auto reboot when a gpu crashed

Thanks!

Hi Tytanick,

Just curious, will your SMos have the watchdog agent installed and polling the SRR by default? Or do we need to install it separately?

I am assuming from the GUI, that you can set values in seconds to initiate reboot at rig if no heartbeat after x seconds/minutes.

Since the SRR basically takes over the on/off switch -- can I issue a command to power off the rig, and power on after 5 minutes?

Thanks

Looks promising, already preordered.
Dobry pomysł :>

I can give it a full review once it comes in

Honestly ? As now it looks like blank page
I will be writing this in next week but it is not complicated :p
There will be instruction
- how to connect rigs to SRR
- how to install and configure SRR Agent on windows/linux
- how to use SRR Tool

Nothing complicated. Alyway there wont be Paper instruction but PDF one with as many pictures as i can

How does the "Instruction manual" look like?

I am using the SRR in conjunction with your Simple Mining OS.

Boards will be fully ready on Monday.
Only we are still making cables with diffrent lenghts.

Many guys asks about cheaper shipping.
I will add economic long 15-30 days shippings but in 1-3 weeks depending on free time.

Anyway three photos for you guys
How looks Board when its night.
Also i added termo elastic to cables to look more nice.
And also Application screenshot.

First of oll, congrats for making and figuring this out
Yeah. Mine project first was just "my need" for not driving every few days to different locations
And then i saw that there is no such device after all
5 years of mining, 5 years of wasting time and still no device? Thats odd right ?

Honestly I prefer your devise because it's smaller and professionally made rather than mine.
But Also in my case there actually is nothing to burn. I'll find the topic and PM it, your opinion would be much appreciated.

I will start sending 1-20 February, so nobody beside me have it
When you weld, remember that electric isolation of each rig is important. Mine device have opto transistors in it. So no way to burn rigs.

Does any one bought one yet ? Can't wait for a review.
Actually until I was waiting for this I came up with my own idea how to manage it remotely with much less cost and some welding skills and this is the reason why I didn't took a part in pre orders.

SHIPPING RATES are configured for World Wide.
Atleast most of them

PRE ORDERS ARE NOW OPEN for all.

But renember that shipping rates are still configured only for Europe, and Rest of world i will be adding in 3-14 days.
Right now i also have big deployment going on in my company - not related to SimpleMining.
Still dont worry, there is plenty of devices available for cheaper preorder price so all interested should get it on time.


https://shop.simplemining.net/

Yes sure.
It must be in range of 12v to 24v and it must be at least 24watt. So it can be 5Ampere.
12v * 5A = 60 watt.
More important is if the connector is 5.5 mm x 2.5 mm
Anyway if it wont fir, you can always go to local RTV store.