Topic: [DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 27. (Read 53283 times)

Ok so wait for more youtube videos, photos and pictures that i will be making soon

Hi, Yes exatly you will be able to reset any rig that is connected to my SimpleRigResetter while not beeing at place.
There is manual method: going to simple webinterface of my device and clicking "reset" near any rig you want.
Or by auto using my watcher program that will need to be installed on each rig. This program will send every few seconds "keepallive" packet to SimpleRigResetter.
If SimpleRigResetter wont receive packet from certain rig within 120 seconds then it will reset it automaticly.
You also will be able to disable watchdog and use only manual resetting ofcourse
One Main Board in deed can handle 2 ExtensionBoards for now.
If this will change then i will let everybody know.

For you 140 rigs you will need:

SimpleRigResetter (8 rigs) + Extension board (24 rigs) + Extension board (24 rigs) = 56 Rigs
SimpleRigResetter (8 rigs) + Extension board (24 rigs) + Extension board (24 rigs) = 56 Rigs
SimpleRigResetter (8 rigs) + Extension board (24 rigs) + (empty slot...................) = 32 Rigs
So in that case you will need to buy:
3x SimpleRigResetter and 5x Extension Boards.
10-100m Cable is free to each Extension Board and you would can select lenght.
Cables to rigs are paid as on website.
So in your case you will need 140 rig Cables (you will can select lenght of each cable)
Also for such bigger orders it will be good to use DHL instead of normal Postage package
It will give you Managing of total 144 rigs.
In that case you will need 3 LAN IP for SimpleRigResetters if you want web access.
For auto-script there will be no need of setting IP for SimpleRigResetter.

Also important to note fo you !!!

SimpleRigResetter
Pre-orders will be opened in this months - December 2016 and shipping of this batch will be 15-30 January.
Normal stock will be available after preorders are sent + about 15 days.

ExtensionBoards:
Preorders will be opened propably in January shipping most propably February.
Normal Stock Will be available after preorders are sent + about 15 days.

So in that Case Whole set you can have as soon as February when using preorders and March with normal stock.
Also note that preorders are cheaper.
Also There will be individual discounts for 5+ boards.
My advice is that you order 1 or 3 SimpleRigResetter for tests and the Extension Boards after i will be opening preorders.

We are on track on everything and we are ordering little upgraded PCB (with better organized Slots for each rig)

In next 15 days i will show more details. Demonstrate how it works. Also show webpanel etc
If you are interested you can write to [email protected]
I will add you mail to my special list ope interested people


All fresh info is always on
https://simplemining.net/page/simpleRigResetter

this means I can restart my rigs any time ? without the need to be at place ?
One main board supports only two 24 extenders ? What config will I need for 140 rigs ?

Always updated info is here:
https://simplemining.net/page/simpleRigResetter

Ok guys, new informations:

SimpleRigResetter will cost 70$ for preorder in December and 90$ as normal price.
It will support 8 rigs + ability to connect TWO extension packs which give +24 +24 rigs.
Extension packs will cost about 99$.
So in other words 90$+99$+99$ will give you managing of 54 rigs with average cost 5,4$ per rig + cost of cables which is 2,5-6 $.
Cable between Main Board and Extension pack is in 99$ price and you can choose 10-100m cable.
Cables for rigs will be sold separately becasue everyone have different needs. On website there is price list for each lenght.
Cable between main board to rig can be max 10m.
Cable between extension pack and rig can be max also 10m.
Ofcourse all rigs are still electrically isolated and safe.
Also there is no power wattage limit that you are using in those rigs becasue  our device dont manage electrisity but only manages motherboard pins
So this is big advantage over all devices. + Low cost per rig.

One person had idea of making wireless little nodes that are powered via motherboard pins.
I looked into it and this is totally doable but the cost of one wireless little board near each rig would be like 30-40$ so its make totally no economic sesne.
Better to use stable long cables and organise then nicely

Shipping is little tricky becasue DHL killed price here. They want like 80$ for small package.
Thats why we will be sending packages using normal post office for about 20-30$.
And as alternative there will be DHL with 80$ cost (but i suppose only big orders will make sens with that DHL)
Preorders still are closed so dont write mails regarding that.
Once i will most of software ready and could show you much more i will open Preorders and ofcourse inform you.
This should be in this month- December 2016.

Always updated info is here:
https://simplemining.net/page/simpleRigResetter

If you would I'd get one.
Plus some cables to make it worth wild

Ide is good but i cant do this.
It will work only for claymore, and not for the rest.
You can monitor your speed in pool stats.
This kind of speed in simplemining.net will be very hard to monitor.
Meaby , i say meaby in long future i will do claymore summing, but rest wont work so i think its no point of doing that.

AND its not this topic

Hello ,
Please add Total hashrate of Rigs on Dashboard
and , Hashrate of Each GPU in Each rig.
and Uptime rig , Total Rigs , Total GPU, and Custom Group like Rx series , R series [ 480 4Gb - 480 8GB ]

30 30 30 30 30
---
Total Hashrate : 3700 Mh / 3.7 Gh


thank you .

I will be shipping to USA and other countries too, but i need to check delivery ground becasue we never shipped to other countries than Europe
So dont worry

I'm still waiting for you project Nikola!!!!

I do like the concept of the idea too

ughh europe only shipping sigh....
nikola you are going to have to mail me one of these

nice concept, well done.

I'll keep an eye on it

With rig separation on optical transistors ?
For 8 for 30$ or 32 rigs for 60$ ? right
I dont think so
I advice not to connect each rig because if one rig will have power problem then it could burn out the rest.
Separation is really important !

For those interested in making this themselves.

Google picoip and check youtube as well. Will cost you around 30-40 bucks for the parts

And if you need the batch files (windows) to setup/reset rigs,  pm me, i can hook you up

Yes, cables will be customized.
We still dont know how we do it but there are two ways:
- separate order for device + speratate order for specific amount and lenght of cables.
or
- standard set with few different lenght of cables like 1,1,2,2,3,3m etc.
First is more logic and more custamisable i guess.
Anyway friend told me that 10m is a safe max for cable lenght. And we will sell cables with no out fee and profit.

Price will propobly be tweaked (be cheaper than now) but as now all info are on website
https://simplemining.net/page/simpleRigResetter
Right now we have 4 testing units with support of 8 rigs and the cost will be cost of 90-120$ + shipping. (most propably less)
Also little later we will be selling Extension pack which will give you support of another 24 rigs for also 90-120$.
But you will need to have RigResetter to connect this Extension pack via RS port that is already placed on board.
So 8 rigs = 90-120$
and 32 rigs = 180-240$
Those prices are MORE-LESS to give idea but fur sure it will be little cheaper.
Also we think that making "beautifull box" for this device is really pointless as all rigs have many cables and are open.
So we will most propably wont make plastic box for this board which will make price of it cheaper ! - you agree with me guys ?

Again all info are on website https://simplemining.net/page/simpleRigResetter
Yes there will be BTC as it is easiest to implement for customers from multiple countries, meaby paypal also.
Warranty as on website 24 months.
Instruction yes ! . We will make it at the very end of project. Propably right before shipping of first batch.
It will be really simple steps to do (in windows or linux) + connecting device will also be very simple.
Hardest from all if it will be locating power switch and power led PINS on motherboard - but i guess it isnt hard right ?
Availiabilty, we will be shipping 15-30 January 2017 OR SOONER. Its better to tell later than sooner and telling that we have delay right ?

Anyway, right now we have raw commands to reset rigs.
Simple web interface with status.
I dont want to show it to you yet becasue it is really simple and when we will make it little nicer + make more complete software i will show you more videos and photos

This is a nice project... do you have a sample screen of the GUI or interface to reset a particular rig?

When available?

Pay in BTC?

Warranty?

Instruction manual?

It could be very usefull thing.
How much exactly it will cost for 6rigs?

i have 20 rigs , some with individual watchdogs, most unwatched.  Ill probbaly try one of you units , but i'm done with preorders and with yours are you providing long wires to reach a whole rack of motherboards ?

Even IF the resetter will hang itself, then it wont do anything becasue it is hangt
It doesnt not manage power outlets 240V but it manages only pins on motherboard.
Also that is the pro of this solution, we dont interfere with power itself but nice "power button"

look that also this device will reset AUTOMATIC the  pc when freeze... just need to write a script for it and say to interface to run the script at freeze event )

you should stay in a 10 /13 usd  per watched rig to be competitive... and 9 to be aggressive  on price.

Agree, but mine will reset automatically rig when it will freeze/crash.
AUTOMATICALLY , not manually. but ofcourse manual also works.
More interested people = less price in production.
I will propobly correct price becasue i didnt want to tell less price and then grow it ...
Will see in next 1-2 weeks.

Anyway if you will count this then 300$ is cost of managing 32 rigs so one rig = 10$ which is pretty nice.