Topic: Don't pay! Ultimate Crypto-Server Installer Script setup your pool in minutes! - page 2. (Read 5202 times)
February 19, 2020, 11:15:01 PM
I need to retract my previous statements. This SCRIPT will do it all. It was my selection of OS on my machine that made it so difficult. After some reading on Discord that you have to use Ubuntu Server Edition. Once, I got that correct he help me get it all fine-tuned. Totally enjoy it now. Thanks for all you Hard Work.
February 17, 2020, 05:05:31 AM
I have reloaded Ubuntu 16.04 and this 6 times and still haven't got it load a website.
user is in the sudo group
don't install Https
letting it control the firewall
And still don't have a site up.
I had Xavatar on the third try.
What gives.....
user is in the sudo group
don't install Https
letting it control the firewall
And still don't have a site up.
I had Xavatar on the third try.
What gives.....
February 09, 2020, 05:09:41 PM
Hello,
There is a problem installing coins.
First, let's say that the installer works very well.
I'm trying with the blake2s algorithm
With the help of the installer and Berkeley 4.x I installed "VERGE",
I opened ports, I created currency, I created .conf
i can't start it. I get an error: "Error reading configuration file: Invalid configuration value gen".
...
I tried installing the new currency "NEVAcoin",
there I installed with Install Coin with makefile.unix file as described in github. The installation was successful. I reopened the ports, created the currency, .conf.
This is where the demon starts and everything looks normal, but the miner can't join.
Cannot connect to xxx.xxx.xxx.xxx:5767
Can you give me a hand. Where is my mistake?
Greetings
There is a problem installing coins.
First, let's say that the installer works very well.
I'm trying with the blake2s algorithm
With the help of the installer and Berkeley 4.x I installed "VERGE",
I opened ports, I created currency, I created .conf
i can't start it. I get an error: "Error reading configuration file: Invalid configuration value gen".
...
I tried installing the new currency "NEVAcoin",
there I installed with Install Coin with makefile.unix file as described in github. The installation was successful. I reopened the ports, created the currency, .conf.
This is where the demon starts and everything looks normal, but the miner can't join.
Cannot connect to xxx.xxx.xxx.xxx:5767
Can you give me a hand. Where is my mistake?
Greetings
So the example config that is generated in yiimp is kind of a generic across the board config. In this case you will need to remove the gen=0 line for the verge config. You may need to make other edits to the file as well depending on the coin.
is this a single server install? if so the only ports you need to open are the stratum ports. If you arent using dedicated ports for example sha would be 3333 if you are using dedicated ports and using the "addport" command that will automatically open the port it creates for you.
And also if you are not using dedicated ports you need to make sure you start the stratum, so again for sha you would run stratum start sha256 on the cli.
You can also check out https://github.com/cryptopool-builders/Multi-Pool-Installer/wiki for more information or jump in on our discord.
February 09, 2020, 04:12:24 AM
Hello,
There is a problem installing coins.
First, let's say that the installer works very well.
I'm trying with the blake2s algorithm
With the help of the installer and Berkeley 4.x I installed "VERGE",
I opened ports, I created currency, I created .conf
i can't start it. I get an error: "Error reading configuration file: Invalid configuration value gen".
...
I tried installing the new currency "NEVAcoin",
there I installed with Install Coin with makefile.unix file as described in github. The installation was successful. I reopened the ports, created the currency, .conf.
This is where the demon starts and everything looks normal, but the miner can't join.
Cannot connect to xxx.xxx.xxx.xxx:5767
Can you give me a hand. Where is my mistake?
Greetings
There is a problem installing coins.
First, let's say that the installer works very well.
I'm trying with the blake2s algorithm
With the help of the installer and Berkeley 4.x I installed "VERGE",
I opened ports, I created currency, I created .conf
i can't start it. I get an error: "Error reading configuration file: Invalid configuration value gen".
...
I tried installing the new currency "NEVAcoin",
there I installed with Install Coin with makefile.unix file as described in github. The installation was successful. I reopened the ports, created the currency, .conf.
This is where the demon starts and everything looks normal, but the miner can't join.
Cannot connect to xxx.xxx.xxx.xxx:5767
Can you give me a hand. Where is my mistake?
Greetings
January 06, 2020, 11:22:34 AM
lots of new updates and features added!
November 20, 2019, 12:21:39 AM
New updated installation video - using daemonbuilder on Ubuntu 18.04 with dedicated ports using addport
http://youtu.be/uPcqty-s5Ss?hd=1
http://youtu.be/uPcqty-s5Ss?hd=1
November 18, 2019, 09:53:46 PM
Updated install video made for Ubuntu 18.04 and SSH key login.
https://www.youtube.com/watch?v=0vutxBSdIcQ&feature=youtu.be&hd=1
https://www.youtube.com/watch?v=0vutxBSdIcQ&feature=youtu.be&hd=1
November 12, 2019, 11:29:08 PM
So, is this pool software capable of anonymous solo merged mining, or is a major software re-coding needed?
You can just create an pool with your setup and just dont share the pool adress or ip or the stratum port with others and point your miners there !
So only you are mining on the pool but you need a lot of hash power if want to find some blocks , for sure it depends on what coin and algo you want to mine.
Solo mining i would advice that you are doing this straight from the wallet you want to mine.
Point your miner to the wallet and start.
Other wise yeb it needs a lot of recoding on the pool software.
November 12, 2019, 06:27:47 PM
Total noob question: What's next? I'm totally new to this and really have no clue on what do do next to get the pool configured or setup. I would appreciate ANY help from anyone on this.
I guess what I'm asking, is for a step-by-step (setting up a cryptopool-builders yiimp pool for Dummies) guide to get the server up and running for testing, and then production for the public.
My long term goal is to have a public anonymous solo merged mining pool for LTC and DOGE, to start, with addition of new coins in the future.
The current solo mm pool I am using, the pool OP has been missing-in-action, meaning, no communications what-so-ever with users of his/her pool, in over a year.
The pool I am referring to is TBDice.org, and as far as I can tell, no updates to the pool software, and sometimes the pool gets "stuck" for a while with nothing updating, and it does not mine ALL weights of blocks.
So, is this pool software capable of anonymous solo merged mining, or is a major software re-coding needed? If so, I can make some LTC "donations" to the coder/s to get this pool setup/modified, up and running.
Thanks in advance.....
I guess what I'm asking, is for a step-by-step (setting up a cryptopool-builders yiimp pool for Dummies) guide to get the server up and running for testing, and then production for the public.
My long term goal is to have a public anonymous solo merged mining pool for LTC and DOGE, to start, with addition of new coins in the future.
The current solo mm pool I am using, the pool OP has been missing-in-action, meaning, no communications what-so-ever with users of his/her pool, in over a year.
The pool I am referring to is TBDice.org, and as far as I can tell, no updates to the pool software, and sometimes the pool gets "stuck" for a while with nothing updating, and it does not mine ALL weights of blocks.
So, is this pool software capable of anonymous solo merged mining, or is a major software re-coding needed? If so, I can make some LTC "donations" to the coder/s to get this pool setup/modified, up and running.
Thanks in advance.....
you can always join us on our discord channel, we have a pretty good community there. Also there is https://github.com/cryptopool-builders/Multi-Pool-Installer/wiki
Out of the box you can not do solo mining. It does require some heavy coding and DB changes to add that feature.
November 12, 2019, 05:13:06 PM
Total noob question: What's next? I'm totally new to this and really have no clue on what do do next to get the pool configured or setup. I would appreciate ANY help from anyone on this.
I guess what I'm asking, is for a step-by-step (setting up a cryptopool-builders yiimp pool for Dummies) guide to get the server up and running for testing, and then production for the public.
My long term goal is to have a public anonymous solo merged mining pool for LTC and DOGE, to start, with addition of new coins in the future.
The current solo mm pool I am using, the pool OP has been missing-in-action, meaning, no communications what-so-ever with users of his/her pool, in over a year.
The pool I am referring to is TBDice.org, and as far as I can tell, no updates to the pool software, and sometimes the pool gets "stuck" for a while with nothing updating, and it does not mine ALL weights of blocks.
So, is this pool software capable of anonymous solo merged mining, or is a major software re-coding needed? If so, I can make some LTC "donations" to the coder/s to get this pool setup/modified, up and running.
Thanks in advance.....
I guess what I'm asking, is for a step-by-step (setting up a cryptopool-builders yiimp pool for Dummies) guide to get the server up and running for testing, and then production for the public.
My long term goal is to have a public anonymous solo merged mining pool for LTC and DOGE, to start, with addition of new coins in the future.
The current solo mm pool I am using, the pool OP has been missing-in-action, meaning, no communications what-so-ever with users of his/her pool, in over a year.
The pool I am referring to is TBDice.org, and as far as I can tell, no updates to the pool software, and sometimes the pool gets "stuck" for a while with nothing updating, and it does not mine ALL weights of blocks.
So, is this pool software capable of anonymous solo merged mining, or is a major software re-coding needed? If so, I can make some LTC "donations" to the coder/s to get this pool setup/modified, up and running.
Thanks in advance.....
November 12, 2019, 02:13:31 PM
interesting. so on a fresh install you are logging in as root user, and are you running the curl command to download the installer from github? If so when it launches its not prompting you to create a user?
i ran the curl command as root user once more to upgrade the script!
and it was not asking me again for the user to run on ..
biggest problem was the ip yiimp binds to .. (external ip)
i dont want to use it for external connections - therefore i'm not setting any portforwarding from my router.
accessing the internal ip only gives me a blank page (on main pool address and on admin address).
i can't interrupt my gateway connection while installing cause it can't download then
i'm ready to reinstall my ubuntu 18 to start from scratch again if neccesary!
Just wanted to know if this should work or not
greetings - Astrali
November 12, 2019, 11:20:51 AM
Ok i pushed a new updated for you guys that are trying to install this locally. The new check will either add your public IP if you are logged in through SSH or it will just put in some dummy IP if you are logging in locally that you will need to change to whatever correct IP you need.
started the setup again with root - as stated in the initial post - it went over the "local ip issue" and is now installing ...
but it looks like it's doing that with the root user now.
i only run it local behind my router - so it's not a big deal - anyway i was wondering
Thanks for your great work!
Greetings - Astrali
[Edit]
Install completed successfully - tried 2 installs -
first one the ip to admin the system from lan on main computer or localhost .. both just open an empty site.
i guess thats cause yiimp will bind to my external ip (and script wont let me change that) ...
tried to edit this in the settings after complete setup but it didnt change the behaviour.
interesting. so on a fresh install you are logging in as root user, and are you running the curl command to download the installer from github? If so when it launches its not prompting you to create a user?
November 12, 2019, 04:12:39 AM
Ok i pushed a new updated for you guys that are trying to install this locally. The new check will either add your public IP if you are logged in through SSH or it will just put in some dummy IP if you are logging in locally that you will need to change to whatever correct IP you need.
started the setup again with root - as stated in the initial post - it went over the "local ip issue" and is now installing ...
but it looks like it's doing that with the root user now.
i only run it local behind my router - so it's not a big deal - anyway i was wondering
Thanks for your great work!
Greetings - Astrali
[Edit]
Install completed successfully - tried 2 installs -
first one the ip to admin the system from lan on main computer or localhost .. both just open an empty site.
i guess thats cause yiimp will bind to my external ip (and script wont let me change that) ...
tried to edit this in the settings after complete setup but it didnt change the behaviour.
November 12, 2019, 01:03:50 AM
so with the daemonbuilder script i wrote, there is actually an option that you can select after a coin build fails that has some of the more common fail reasons, and it will apply the fixes and build the coin.
Is there also an option that you can edit the faild file on the compile process ?
Or does your script give an detailed information on what file the compile was faild and what line on the code in the file is the problem that the compile has faild?
Im just asking because there are some wallets that have a few old codes in the file and when you compile them you have a few fails .
And if you dont know how to fix it the code it will take ages to solve it or maybe you dont get it working .
But i guess i dont have to tell you about .
the script does it all. So for example old ass error thats a pain, invalid application of sizeof error. So if the build fails and gives you that error, you rerun daemonbuilder select the Daemon Build Failed - Help! option and then there you will see Fix invalid application of sizeof error option, select that and it makes the edits and then continues to build the coin.
Like I said most of the common ones are there so coin building is a bit easier and faster for both new folks and old timers.
November 12, 2019, 12:18:51 AM
so with the daemonbuilder script i wrote, there is actually an option that you can select after a coin build fails that has some of the more common fail reasons, and it will apply the fixes and build the coin.
Is there also an option that you can edit the faild file on the compile process ?
Or does your script give an detailed information on what file the compile was faild and what line on the code in the file is the problem that the compile has faild?
Im just asking because there are some wallets that have a few old codes in the file and when you compile them you have a few fails .
And if you dont know how to fix it the code it will take ages to solve it or maybe you dont get it working .
But i guess i dont have to tell you about .
November 12, 2019, 12:05:37 AM
Hows about your script working when there are a few errors when the wallet is compiling ?
There are so many old wallets and other wallets that have some problems when you compile them because the maybe the dev. team dont have updated or worked on them anymore !
I run my one pool now for over an year with yiimp and i got a few wallets in the past that was realy painful for compile them because of errors in the code or opj folder wasnt empty and more.
Can your script handle that ? just asking .
And by the way nice work , its helpful for new users that want to try them on a mining pool .
There are so many old wallets and other wallets that have some problems when you compile them because the maybe the dev. team dont have updated or worked on them anymore !
I run my one pool now for over an year with yiimp and i got a few wallets in the past that was realy painful for compile them because of errors in the code or opj folder wasnt empty and more.
Can your script handle that ? just asking .
And by the way nice work , its helpful for new users that want to try them on a mining pool .
so with the daemonbuilder script i wrote, there is actually an option that you can select after a coin build fails that has some of the more common fail reasons, and it will apply the fixes and build the coin.
November 11, 2019, 10:56:52 PM
Hows about your script working when there are a few errors when the wallet is compiling ?
There are so many old wallets and other wallets that have some problems when you compile them because the maybe the dev. team dont have updated or worked on them anymore !
I run my one pool now for over an year with yiimp and i got a few wallets in the past that was realy painful for compile them because of errors in the code or opj folder wasnt empty and more.
Can your script handle that ? just asking .
And by the way nice work , its helpful for new users that want to try them on a mining pool .
There are so many old wallets and other wallets that have some problems when you compile them because the maybe the dev. team dont have updated or worked on them anymore !
I run my one pool now for over an year with yiimp and i got a few wallets in the past that was realy painful for compile them because of errors in the code or opj folder wasnt empty and more.
Can your script handle that ? just asking .
And by the way nice work , its helpful for new users that want to try them on a mining pool .
November 11, 2019, 10:27:52 PM
Hey....your latest update seems to have fixed the issue I was having. It's installing, and I'll update this post when it's finished installing. Thanks for taking the time to issue a new update.
glad to hear! TBH i never even really thought when i was writing this about folks trying to install locally lol.
November 11, 2019, 10:04:43 PM
Hey....your latest update seems to have fixed the issue I was having. It's installing, and I'll update this post when it's finished installing. Thanks for taking the time to issue a new update.
November 11, 2019, 07:54:27 PM
Hi,
Still having the same issue at the last of the questions.
It shows this text "PublicIP" instead of the actual IP address the server has been issued by my routers DHCP.
Tried multiple time with entering in my actual IP address, with the same results.
How do I set "AdminPanel". The IP address that it shows me is my ISP's main address for my router. I want to use my private network IP address to access the AdminPanel.
What is the correct syntax.
Thanks
Still having the same issue at the last of the questions.
It shows this text "PublicIP" instead of the actual IP address the server has been issued by my routers DHCP.
Tried multiple time with entering in my actual IP address, with the same results.
How do I set "AdminPanel". The IP address that it shows me is my ISP's main address for my router. I want to use my private network IP address to access the AdminPanel.
What is the correct syntax.
Thanks
Ok i pushed a new updated for you guys that are trying to install this locally. The new check will either add your public IP if you are logged in through SSH or it will just put in some dummy IP if you are logging in locally that you will need to change to whatever correct IP you need.
Jump to: