Topic: DragonMint T1 16TH/S halongmining.com - page 29. (Read 87857 times)

That still doesnt excuse the fact that this is a Bitcoin Classic miner only. It cannot mine ANY other sha256d algo. They also didnt mention that until months after pre-order. After all the defensive shills talking about how great this company is, it brings me a small perverse pleasure to see all of these problems with the company popping up already. Shipping delays, hardware cancellation after a preorder, trying to force authorized distributors to sell machines that are out of spec. Man this company sure seems like they are gonna save us from the 'evil' bitmain and their as advertised on time products lmao

Again, this isn't technical problem. The changes to any pool software to support ASICboost are nearly trivial and don't infringe on any patents. Just ask any pool manager, the same way philima1957 did.

https://en.wikipedia.org/wiki/Tempest_in_a_teapot
https://en.wikipedia.org/wiki/Storm_in_a_Teacup

Going by the spec of the stratum extensions it's possible to fall back to reduced version-rolling or no version-rolling. I didn't know the DragonMint won't do that. So they just refuse to mine then?

so ur sayin they "insist" u ship miners that are running multiple TH/s slower than the factory spec and they claim the hashrate is as advertised??



u mean "at all"?? because they wont run at all without asicboost. They only mine 1 coin on select pools. folks cant miner ne other coins when they use these things.

Order #18XX placed the second week of December is still "processing." Sigh...

I'm assuming/hoping that the order will ship next week.

A 24 hours open support ticket with Halong without any answer.
That is an answer, too.

They messed up the delivery for the April batches.
That is not too bad, mistakes can happen all the time and everywhere.

But the informations to the customers are lies since 3 weeks and if something went wrong, then you have to inform the customers with honest informations.

That is the main problem I see right now. Wrong or no informations.

April 24 Update.

No T1 delivered from Halong Mining Limited as of today.  

Halong Mining also offered to deliver 640 units from factory on April 25th in late afternoon separate from the below issues. (late afternoon delivery means, ship-out be the following business day)

Halong Mining is insisting that we ship 1000 miners starting this Friday that performs anywhere from 0TH-16.2TH while majority are 13-14TH/s units.  They insists these were tested in-spec miners as advertised.  The below photo comes from QA system screenshot in China as of the 24th in the evening.

Yoshi requested Halong Mining to provide unit that meets the specification for the customers and waiting on reply.  Hopefully, this is just a factory and halong mining's miscommunications within their organization rather than the reality.

I let my 10 T-1's do their performance tuning and I was averaging ~16.5TH/s/unit; however, my PDU was reading 17,000 watts and within a few days I blew a power supply. I decided it was better to run them on balanced and not risk the PSU's blowing out. Performance mode definitely runs on the edge.

Good to finally have some information. I've also been pestering them a lot about a couple April Batch 2 orders without any information.

It's a hard life being a bitcoin miner. Having to plan the rest of my life schedule around unknown deliveries from China.

Bitminter now has version-rolling ASICBoost support on all mining servers.

This means your DragonMint miners, and other future ASICBoost miners, will run full speed on Bitminter.

A big thanks to philipma1957 for helping with testing - it is much appreciated!

I believe we are the fourth pool to add this - is there a list of pools that support asicboost?
(Slushpool, ckpool, Bitcoin India is what I saw so far)

AHh, I misread it then. Ive adjusted my post as needed.

https://bitcointalksearch.org/topic/faq-everything-you-need-to-know-about-forum-activity-account-ranks-and-merit-2766177

There you go  . Don't mean to put you down or anything, I believe you made an honest mistake, but if I open the meta forum it is just a sh*t show of merit topics and that is why I reacted 

^{offtopic: just like the trust system I think the merit system is a piece of garbage}

REPOST from other post...

PSA: If DragonMint T1 having problem with the hash PCB, please try updating to the newest firmware, if this does not work, then hash PCB will more than likely need to be replaced if you are an original purchaser.  http://ck.kolivas.org/temp/t1_20180421_081246.swu


Let me update this a bit more clear....

We have not received T1 for shipping out yet.  It is very disappointing, however, we had message from Halong Mining that it is looking good for later this week delivery.  Shipping for Myrig Customers are all prepared and ready to go as soon as units are delivered.  For all sales from Myrig.com do have +-10 days buffer on sales agreement just in case.  March, all T1 were sent out by end of March, except we did not receive shipment within china for mainland china customers, so that were missed. (B29/B52 included)

B29/B52 customers, initial group went out with a few days of delayed delivery to us but within +-10 zone, however, there were hiccup on other half where recall (stop ship order from Halong Mining) took place for firmware update and retesting of the unit and factory staffs and Halong staffs were at the warehouse working on the unit and some shipping labels were removed/lost from the already prepared package.  (had a slight dhl hiccup where they collected pallets of shipment but forgot 3 pallets behind...)

Halong's X1 and X2 wise, it is canceled and processing refund or substitute exchange based on what was offered from Halong Mining.  Please contact same email address where you received the purchase invoice from for refund/substitute request.  BTC is faster than wire (wink wink!)

If you have sales contract with shipping date expired, please contact us as soon as possible so we can fix the situation.

Regarding Repair/Replacement, We finally received a very small quantity of B29 and B52 and T1 for warranty exchange use.  

Localized Warranty Exchange via Myrig.com is available in the following status

T1: USA, Spain, Russia, Ukraine (local exchange available for original Halongmining.com purchaser or Myrig.com customers)

B29 & B52: very small quantity of spare parts received and currently all located in Hong Kong only (received as of April 23)  These be allocated for localized exchange use by end of next week.

Innosilicon model miners, we were requested to provide their warranty services, however, delivery of parts and equipment is extremely delayed and very little service can be provided at the moment.  Dash and LTC miner may be repaired or replaced if under warranty while parts quantity last.  (If you are affected with defective Dash Miner with over heating problems, the repair can be performed at Myrig's local service centers around the world as long as you obtain authorization from InnoSilicon prior to being serviced. (serviced item will retain original manufacture's warranty duration after our service)

Bitmain product, we are good to go on all S9 models and T1 models as well as L3 & L3+.  D3 parts is limited and A3, parts are out of stock at the moment.

Limited PAID services for Bitfury related miner will be available in the near future to public customers.


Here is what the ip set button does:

When using the ip set button to set to static it should set the miner to the following IP settings:


*MYRIG STAFFS WILL NOT ASK YOUR PASSWORD or LOGIN INFORMATION TO ANY SERVICES (teamviewer may be an exception while providing a live support)  ALSO, crypto payment will not be asked via chat or messaging applications.  

*There is no other MYRIG staffs on BitcoinTalk to reply under any other account at the moment.  Please DO NOT send any order information or payments to anyone claiming to be Myrig Representative via PM on this forum.  *This account is the only official communication account*

I'm having trouble finding it. If somebody could lead me to the merit rules it would be appreciated. If I remember correctly it said asking for merit was fine as long as it wasn't done excessively. (paraphrasing but I thought that was the just of it.) If people think its in bad taste ill happily remove that part, don't mean any offense by it.

---

Moderator's note: This post was edited by frodocooper to remove nested quotes.

Yeah, I see no point asking for merit.

Don't worry, you will get some merit points from other members if you post some nice and useful content here at the forum.

i guess that is your answer Haggsfin 

@userghost: although I appreciate the info you're providing I think it is bad taste asking for merit. The post either deserves it or not but asking for it is just plain wrong.

Because I have seen several threads with people complaining about shipping times. By making a new thread, everyone sees it, instead of people that just see this thread. Its great news, I figured it deserves to be widely spread.

Why did you have to create a new thread for one small announcement?   It doesn't make any sense,  it only clogs the forum.

Here is a quote,

I was just told April 30th. Heres the relevant thread. [Link removed]

---

Moderator's note: This post was edited by frodocooper to remove an unnecessary quote and a link to a deleted post.

BATCH 2 (order 3xxx)

I asked them since 3 weeks, every week, what is about the shipping date. Its not that we have no time, but we need a date for our organization.
First answer: End of week
Second answer: End of week (but it was next week)
Third answer (again a week later): We are starting to ship batch one next week (last week!) and then we are sending Batch2 etc.

A pitty - nothing sent out yet.
Well the problem of the delay is on the one hand money, the money of customers getting the machines late.
But it would be not a big deal if they would just give out fair and honest informations and dont put the customers off all the time with next week promising.

Maybe they really believed in it "next week" and there are problems with a part, a chip whatever supplier is not in their own range.

A fair and official news would be the right deal.
To master this in a good way its 3 weeks late, but to show they understand how to communicate problems with the customers they should NOW give us reliable and honest informations and change for the future.

Maybe they cannot send the machines, because the calculation for own mining has changed.
The machines they produced maybe did not mined enough coins for themself.

Or maybe its just a supplier or handling problem.
Whatever it is, without reliable news the conspiracy fans are getting new oil for the fire

Start to write them every 12-48 hours when the machines will be shipped and why there is a delay.
.. until we all have a honest answer. Its our right to use the ticket support until our claim is solved in a good way.

Best way to teach them never holding back informations again, which is an unwritten right of a customer, owner or investor