Topic: DragonMint T1 16TH/S halongmining.com - page 6. (Read 87857 times)
Doubtful, in fact it better NOT work without a fan signal! Just search Amazon etc for a 'fan speed simulator' or 'miner fan simulator' for devices to provide a fake fan speed signal.
There's not an option to change hostname AFAIK, although you may be able to set it in your router's DHCP lease settings based on the MAC address, there shouldn't be a fan check, only a temperature check.
Dont like hardware that cant change hostname.
So, i can throw out fans and it work?
As far as disabling fan check, you may want to check out BraiinsOS over in the mining software sub. Open-source, free fw for the T1 and S9 from the team behind slush pool. I know the S9 version has the ability to disable fan check.
I wouldn't recommend using that for the T1, I don't think it properly supports all hardware variants.
As far as disabling fan check, you may want to check out BraiinsOS over in the mining software sub. Open-source, free fw for the T1 and S9 from the team behind slush pool. I know the S9 version has the ability to disable fan check.
Someone know how to change hostname in T1? Rightnow it just "dragonmint"
And is there any option to disable fan check? (i need it for immersion cooling)
And is there any option to disable fan check? (i need it for immersion cooling)
There's not an option to change hostname AFAIK, although you may be able to set it in your router's DHCP lease settings based on the MAC address, there shouldn't be a fan check, only a temperature check.
Someone know how to change hostname in T1? Rightnow it just "dragonmint"
And is there any option to disable fan check? (i need it for immersion cooling)
And is there any option to disable fan check? (i need it for immersion cooling)
My miner mined for about 10 minutes when I first plugged it in and now I just get spinning circles in the Miner Status page. THe Miner log looks like is trying to log in. Im not sure what is wrong. I thought the slushpool password might be wrong but I guess that's just arbitrary. Does anyone know what is wrong?
Have you tried another pool? Are you mining behind a proxy/vpn? Which addresses have you tried for slushpool? Do you have different addresses filled in for the Pool 0, 1, 2?
For slush I use these addresses in case a node goes down:
stratum+tcp://us-east.stratum.slushpool.com:3333
stratum+tcp://ca.stratum.slushpool.com:3333
stratum+tcp://eu.stratum.slushpool.com:3333
My miner mined for about 10 minutes when I first plugged it in and now I just get spinning circles in the Miner Status page. THe Miner log looks like is trying to log in. Im not sure what is wrong. I thought the slushpool password might be wrong but I guess that's just arbitrary. Does anyone know what is wrong?
Code:
Mar 07 21:08:09 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:09.549] cow vid vid
Mar 07 21:08:09 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:09.549] cow vid vid
Mar 07 21:08:12 dragonMint nginx[1310]: 192.168.42.118 - - [07/Mar/2019:21:08:12 +0000] "POST /api/summary HTTP/1.1" 200 28 "http://192.168.42.119/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_14_2) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/72.0.3626.119 Safari/537.36"
Mar 07 21:08:14 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:14.549] b9 pin:957,a10 pin:943
Mar 07 21:08:14 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:14.549] b9:1,a10:1,val:0x00000003
Mar 07 21:08:14 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:14.549] b9 pin:957,a10 pin:943
Mar 07 21:08:14 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:14.549] b9:1,a10:1,val:0x00000003
Mar 07 21:08:14 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:14.550] cow vid vid
Mar 07 21:08:14 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:14.550] cow vid vid
Mar 07 21:08:16 dragonMint nginx[1310]: 192.168.42.118 - - [07/Mar/2019:21:08:16 +0000] "POST /api/getHashRates HTTP/1.1" 200 147 "http://192.168.42.119/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_14_2) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/72.0.3626.119 Safari/537.36"
Mar 07 21:08:19 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:19.550] b9 pin:957,a10 pin:943
Mar 07 21:08:19 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:19.550] b9:1,a10:1,val:0x00000003
Mar 07 21:08:19 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:19.550] b9 pin:957,a10 pin:943
Mar 07 21:08:19 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:19.550] b9:1,a10:1,val:0x00000003
Mar 07 21:08:19 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:19.550] cow vid vid
Mar 07 21:08:19 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:19.550] cow vid vid
Mar 07 21:08:21 dragonMint cgminer[1625]: Pool 0 difficulty changed to 10000
Mar 07 21:08:22 dragonMint cgminer[1625]: Pool 0 message: Failed authorisation :(
Mar 07 21:08:24 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:24.551] b9 pin:957,a10 pin:943
Mar 07 21:08:24 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:24.551] b9 pin:957,a10 pin:943
Mar 07 21:08:24 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:24.551] b9:1,a10:1,val:0x00000003
Mar 07 21:08:24 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:24.551] cow vid vid
Mar 07 21:08:24 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:24.551] b9:1,a10:1,val:0x00000003
Mar 07 21:08:24 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:24.551] cow vid vid
Mar 07 21:08:29 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:29.551] b9 pin:957,a10 pin:943
Mar 07 21:08:29 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:29.551] b9 pin:957,a10 pin:943
Mar 07 21:08:29 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:29.551] b9:1,a10:1,val:0x00000003
Mar 07 21:08:29 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:29.552] cow vid vid
Mar 07 21:08:29 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:29.551] b9:1,a10:1,val:0x00000003
Mar 07 21:08:29 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:29.552] cow vid vid
Mar 07 21:08:29 dragonMint cgminer[1625]: Pool 0 difficulty changed to 10000
Mar 07 21:08:30 dragonMint cgminer[1625]: Pool 0 message: Failed authorisation :(
Mar 07 21:08:34 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:34.552] b9 pin:957,a10 pin:943
Mar 07 21:08:34 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:34.552] b9:1,a10:1,val:0x00000003
Mar 07 21:08:34 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:34.552] b9 pin:957,a10 pin:943
Mar 07 21:08:34 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:34.552] b9:1,a10:1,val:0x00000003
Mar 07 21:08:34 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:34.552] cow vid vid
Mar 07 21:08:34 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:34.552] cow vid vid
Mar 07 21:08:38 dragonMint cgminer[1625]: Pool 0 difficulty changed to 10000
Mar 07 21:08:39 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:39.553] b9 pin:957,a10 pin:943
Mar 07 21:08:39 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:39.553] b9 pin:957,a10 pin:943
Mar 07 21:08:39 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:39.553] b9:1,a10:1,val:0x00000003
Mar 07 21:08:39 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:39.553] cow vid vid
Mar 07 21:08:39 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:39.553] b9:1,a10:1,val:0x00000003
Mar 07 21:08:39 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:39.553] cow vid vid
Mar 07 21:08:39 dragonMint cgminer[1625]: Pool 0 message: Failed authorisation :(
Mar 07 21:08:44 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:44.553] b9 pin:957,a10 pin:943
Mar 07 21:08:44 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:44.553] b9:1,a10:1,val:0x00000003
Mar 07 21:08:44 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:44.553] b9 pin:957,a10 pin:943
Mar 07 21:08:44 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:44.553] b9:1,a10:1,val:0x00000003
Mar 07 21:08:44 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:44.554] cow vid vid
Mar 07 21:08:44 dragonMint dm-monitor[1275]: [INFO:2019-03-07 21:08:44.554] cow vid vid
@fanatic
Totally agreed!
It was funny to watch them struggle while I pointed similar design details between their and Inno's miners
Totally agreed!
It was funny to watch them struggle while I pointed similar design details between their and Inno's miners
similar?
more like 100% identical
@fanatic
Totally agreed!
It was funny to watch them struggle while I pointed similar design details between their and Inno's miners
Totally agreed!
It was funny to watch them struggle while I pointed similar design details between their and Inno's miners
Been interesting to watch. Halong might still be around If Inno didn't pull the carpet on their t2. Then Halong struggled in a number of areas like you mention.
I didn't realize Halong was operating this way, skimping and lying about the quality of their chips and components.
They were a fly by night con job in the end. All this talk about bringing power back to the mines hands and all this other garbage about how they were going to be the better choice for equipment.
The reality is, they did nothing more than sell a rebranded innosilicon designed miner.
TLDR their business practices were incredibly shady from the get go, despite MANY of us repeatedly calling them out over it people somehow still decided to buy from them. You should not be surprised about a lack of quality when it comes to their single product they made before folding.
Most likely they won’t burn up .
Many issues where caused by running them at top speed vs balanced.
The myrig psus are not good engouh to run at top speed setting.
Of the five I had I ended up like you four good one with two boards.
I ran them at balanced and never really felt they would burn.
Many issues where caused by running them at top speed vs balanced.
The myrig psus are not good engouh to run at top speed setting.
Of the five I had I ended up like you four good one with two boards.
I ran them at balanced and never really felt they would burn.
Thanks for the reply.
Yeah I keep my T1's running in balanced mode so I'm hoping they will be ok. I've tried to up them to performance mode in the past but the power supply would fail almost immediately. I'm going to let them run but keep a closer eye on them. Hearing about that guy having $250K worth of equipment burn up and the possiblity of a fire hazard because of a bad PCB design and components makes me nervous though. I didn't realize Halong was operating this way, skimping and lying about the quality of their chips and components.
I haven't had many other issues with them other than the dead board and one PSU going bad. I actually sent the board and PSU off for warranty replacement back in August. They seemed pretty responsive back then and sent me a replacement board and PSU within a few days. Everything was running well until I had another board fail a few months later. I never got around to trying to replace it until now. I guess I'll just run it with the 2 boards and keep an eye out for anyone selling T1 boards on eBay.
Its been months since I’ve checked this thread but I am a little concerned about the recent posts. I’m running 5 Dragonmint T1s at the moment and have 1 with a dead board that I was hoping to get repaired but it looks like I’m out of luck with that considering MyRig is no longer doing those repairs.
Do the T1s present a legitimate fire hazard? Have there been other incidents of them catching fire? I’d like to know if they are safe to still run. If not I will be shutting them down.
Thanks
Do the T1s present a legitimate fire hazard? Have there been other incidents of them catching fire? I’d like to know if they are safe to still run. If not I will be shutting them down.
Thanks
Most likely they won’t burn up .
Many issues where caused by running them at top speed vs balanced.
The myrig psus are not good engouh to run at top speed setting.
Of the five I had I ended up like you four good one with two boards.
I ran them at balanced and never really felt they would burn.
Its been months since I’ve checked this thread but I am a little concerned about the recent posts. I’m running 5 Dragonmint T1s at the moment and have 1 with a dead board that I was hoping to get repaired but it looks like I’m out of luck with that considering MyRig is no longer doing those repairs.
Do the T1s present a legitimate fire hazard? Have there been other incidents of them catching fire? I’d like to know if they are safe to still run. If not I will be shutting them down.
Thanks
Do the T1s present a legitimate fire hazard? Have there been other incidents of them catching fire? I’d like to know if they are safe to still run. If not I will be shutting them down.
Thanks
Thanks Steamtyme. I will have a look. Any trick for repairing on my own ?
Sorry missed this.
Actual board repair is outside my skillset. What you can do is snap some photos of the problem board and see if anyone notices the problem and has any advice.
Good luck
Thanks Steamtyme. I will have a look. Any trick for repairing on my own ?
Could try removing the board and reflowing it (heating the solder to melting point again) - ovens are quite expensive but most decent IT repair places will have one. Absolute worst case you could try in your oven... last ditch hail mary but might work (Google Reflowing Home Oven or something like that)
Thanks Steamtyme. I will have a look. Any trick for repairing on my own ?
Thanks for the reply Biffa.
Phoenix sorry to say you are out of luck. Halong is essentially dead and there is no line on replacement parts for repair. Not sure of all the details, but I dont think MyRig was supplied with parts to continue offering a repair service.
You can always try posting in the marketplace that you are looking for parts, maybe someone has a near dead miner to offload.
Phoenix sorry to say you are out of luck. Halong is essentially dead and there is no line on replacement parts for repair. Not sure of all the details, but I dont think MyRig was supplied with parts to continue offering a repair service.
You can always try posting in the marketplace that you are looking for parts, maybe someone has a near dead miner to offload.
I've a defect hasing board on one of my miner. I wrote to Halong but since i'm out of warranty, they sent me to myrig but they didnt want to repair, they dont have equipement from halong.
please help!
please help!
Jump to: