Author

Topic: [ESHOP launched] Trezor: Bitcoin hardware wallet - page 114. (Read 966173 times)

sr. member
Activity: 392
Merit: 250
...
Also, the MyTrezor app only supports USD. Would be nice to see all currencies from bitcoinaverage.com implemented...



What do you mean it only supports USD, I have only seen the balances in BTC every time I have used it

App as in the "myTrezor Lite" Android app.
r
i installed the app, do not work. when i scan the qrcode givse me error
"trouble deserialzing"

ridicolous
sr. member
Activity: 392
Merit: 250
i got two accounts in my trezor
one now is desappeared, i do not know why
how to recovery it?? Huh

hero member
Activity: 778
Merit: 531
...
Also, the MyTrezor app only supports USD. Would be nice to see all currencies from bitcoinaverage.com implemented...



What do you mean it only supports USD, I have only seen the balances in BTC every time I have used it

App as in the "myTrezor Lite" Android app.
donator
Activity: 2772
Merit: 1019
Hey guys, do you plan to have an android app with full support (spending).

It would be very nice since I travel lot and do not want  to take my workstation.

Kind regards.

I think I read mycelium guys are considering trezor support. After they implemented the necessary BIPs for HD and mnemonic, integrating https://github.com/trezor/trezor-android doesn't seem far-fetched.

Don't expect satoshilabs to come up with more wallet software... they've done their part, I'd say (and pretty well, too). Division of labor!
legendary
Activity: 1456
Merit: 1001
This is the land of wolves now & you're not a wolf
Hey guys, do you plan to have an android app with full support (spending).

It would be very nice since I travel lot and do not want  to take my workstation.

Kind regards.

i read somewhee in this topic that there is an trezor-android github or sopething. Would be nice indeed.
Also, the MyTrezor app only supports USD. Would be nice to see all currencies from bitcoinaverage.com implemented...



What do you mean it only supports USD, I have only seen the balances in BTC every time I have used it
legendary
Activity: 1470
Merit: 1000
Want privacy? Use Monero!
Hey guys, do you plan to have an android app with full support (spending).

It would be very nice since I travel lot and do not want  to take my workstation.

Kind regards.

i read somewhee in this topic that there is an trezor-android github or sopething. Would be nice indeed.
Also, the MyTrezor app only supports USD. Would be nice to see all currencies from bitcoinaverage.com implemented...

newbie
Activity: 56
Merit: 0
Hey guys, do you plan to have an android app with full support (spending).

It would be very nice since I travel lot and do not want  to take my workstation.

Kind regards.
full member
Activity: 162
Merit: 109
sr. member
Activity: 392
Merit: 250
But I think, that it should be wise to drop "Bits Of Proof" if that's the "so called backend" and replace it with something more decent, perhaps "chain.com" can be a contender?

Unfortunately no other blockchain explorers understand BIP32 ...

Is that necessary or even desirable? Is the root xpub uploaded to mytrezor.com servers for balance check? That's pretty bad for privacy, no?

Yes horrible privacy, trezor has many mistakes like this that harms the product privacy. The faster electrum can get out of beta the better!

is trezor an NSA trojan?
donator
Activity: 2772
Merit: 1019
For what it's worth, I got the trezor working with electrum by following the instructions posted earlier.

I had to install a half dozen python packages before it would actually start, but each time it would tell me what was missing.  Then it recognized my trezor right away, and showed all the right addresses and balances.

I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.

You probably also need to install the python-trezor module.

I think a way to somewhat bypass the dependency hell is to use the installer:

Code:
python setup.py install

When I do that, it downloads all the necessary python packages (except python-trezor, which is only needed at run time).

Not for me.  It was electrum that was missing dependencies, not python-trezor.  And it's electrum's issue where signing messages doesn't work.  I am guessing it is some library version incompatibility or something.  I don't really have time to investigate right now, but the issue is I'd click sign and it would just hang.  The console would show a traceback, something to do with QR codes (which is odd because there is no QR code involved).

I think he meant to do "python(2) setup.py install" in electrum directory. Did you do it there or only in python-trezor?
hero member
Activity: 496
Merit: 500
For what it's worth, I got the trezor working with electrum by following the instructions posted earlier.

I had to install a half dozen python packages before it would actually start, but each time it would tell me what was missing.  Then it recognized my trezor right away, and showed all the right addresses and balances.

I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.

You probably also need to install the python-trezor module.

I think a way to somewhat bypass the dependency hell is to use the installer:

Code:
python setup.py install

When I do that, it downloads all the necessary python packages (except python-trezor, which is only needed at run time).

Not for me.  It was electrum that was missing dependencies, not python-trezor.  And it's electrum's issue where signing messages doesn't work.  I am guessing it is some library version incompatibility or something.  I don't really have time to investigate right now, but the issue is I'd click sign and it would just hang.  The console would show a traceback, something to do with QR codes (which is odd because there is no QR code involved).

Did you install python-trezor? It is a dependency for the Electrum Trezor plugin. Also, I was suggesting that you use the installer for Electrum, not just python-trezor.
full member
Activity: 236
Merit: 100
For what it's worth, I got the trezor working with electrum by following the instructions posted earlier.

I had to install a half dozen python packages before it would actually start, but each time it would tell me what was missing.  Then it recognized my trezor right away, and showed all the right addresses and balances.

I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.

You probably also need to install the python-trezor module.

I think a way to somewhat bypass the dependency hell is to use the installer:

Code:
python setup.py install

When I do that, it downloads all the necessary python packages (except python-trezor, which is only needed at run time).

Not for me.  It was electrum that was missing dependencies, not python-trezor.  And it's electrum's issue where signing messages doesn't work.  I am guessing it is some library version incompatibility or something.  I don't really have time to investigate right now, but the issue is I'd click sign and it would just hang.  The console would show a traceback, something to do with QR codes (which is odd because there is no QR code involved).
hero member
Activity: 836
Merit: 1030
bits of proof
I have not received a bug report from TREZOR that would imply a downtime of the magnitude claimed in this thread, therefore would be fair if it was not represented as a BoP issue.

Are you implying that all reported bugs to you have already been fixed and fixes delivered to us?

I imply what I said. No known issues that would lead to significant downtime if the server is operated as suggested.
hero member
Activity: 496
Merit: 500
For what it's worth, I got the trezor working with electrum by following the instructions posted earlier.

I had to install a half dozen python packages before it would actually start, but each time it would tell me what was missing.  Then it recognized my trezor right away, and showed all the right addresses and balances.

I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.

You probably also need to install the python-trezor module.

I think a way to somewhat bypass the dependency hell is to use the installer:

Code:
python setup.py install

When I do that, it downloads all the necessary python packages (except python-trezor, which is only needed at run time).
donator
Activity: 2772
Merit: 1019
For what it's worth, I got the trezor working with electrum by following the instructions posted earlier.

I had to install a half dozen python packages before it would actually start, but each time it would tell me what was missing.  Then it recognized my trezor right away, and showed all the right addresses and balances.

I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.

It's good to know my crude howto worked. I was hoping the installation of dependencies would be self-explanatory. Seems it is.
hero member
Activity: 692
Merit: 500
I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.

To sign a message :
-> Addresses Tab -> Right click on the address your want to sign from -> Sign/verify Message
full member
Activity: 236
Merit: 100
For what it's worth, I got the trezor working with electrum by following the instructions posted earlier.

I had to install a half dozen python packages before it would actually start, but each time it would tell me what was missing.  Then it recognized my trezor right away, and showed all the right addresses and balances.

I wanted to try to sign a message (since mytrezor.com doesn't have that functionality) but I couldn't get that part to work.  Some error came from the QR code part of the app.
hero member
Activity: 692
Merit: 500
Loading... Loading... Loading... Needs another reboot boys.

Working for me
sr. member
Activity: 475
Merit: 250
Loading... Loading... Loading... Needs another reboot boys.
Jump to: