Etarminer - New cuda miner for ethereum

Ryoga1980

newbie

Activity: 4

Merit: 0

Try disable SLI in Nvidia COntrol Panel, I could not get it to work with SLI Enabled

Getting 40 Mh/s on 2xGTX970 intensity 18,20

my bat:
Etarminer -url http://eth-eu1.nanopool.org:9999 -wlt walletaddress -wrk workername -eml email -intg g0 18 g1 20 -wsz 128 -exp 0 -ess 0 -toffg g0 87

Quote from: izeban on June 18, 2017, 07:31:30 PM

Hmm
I just call
Etarminer -url http://eu2.ethermine.org:4444 -wlt "mywalletadress.worker -wrk workername -eml x -int 21 -wsz 128 -ess 1
but ther eis no reported hashrate shown in ethermine.
any advice to that?

I have two gtx970 in sli mode at 35.2 mh/s rate (gpu@1499 mhz watercooled)

Ot on:
Maybe one has an advice, too to my watercooling stuff.
An other question is that my cooling water exits the second gpu at 60 °C (after the first it''s 41°C), so I plan to put a radiator in between the two gpus. Is that a good idea?
The System is cooled with aquaduct 720 xt mark iv at the moment.
ot off

izeban

newbie

Activity: 5

Merit: 0

Hmm
I just call
Etarminer -url http://eu2.ethermine.org:4444 -wlt "mywalletadress.worker -wrk workername -eml x -int 21 -wsz 128 -ess 1
but ther eis no reported hashrate shown in ethermine.
any advice to that?

I have two gtx970 in sli mode at 35.2 mh/s rate (gpu@1499 mhz watercooled)

Ot on:
Maybe one has an advice, too to my watercooling stuff.
An other question is that my cooling water exits the second gpu at 60 °C (after the first it''s 41°C), so I plan to put a radiator in between the two gpus. Is that a good idea?
The System is cooled with aquaduct 720 xt mark iv at the moment.
ot off

Etar

sr. member

Activity: 642

Merit: 316

Quote from: jk_14 on November 29, 2016, 05:48:56 PM

Quote from: Etar on November 29, 2016, 12:34:23 PM

LINUX version Etarminer 1_8 available
https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms
Tested on Ubuntu 16.04

Code:

root@kopiemtu:~/ETAR# ./Etarminer -url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass
[START launcher]
[START EtarminerSecondary]

(EtarminerSecondary:10657): Gtk-WARNING **: cannot open display:
[restart miner]-url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass

(EtarminerSecondary:10685): Gtk-WARNING **: cannot open display:
[restart miner]-url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass

(EtarminerSecondary:10722): Gtk-WARNING **: cannot open display:
[restart miner]-url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass

And is it possible to run it without GUI ?
i.e. after:
service lightdm stop

RELOAD Archive . I Fix this problem. Use -GUIDIS in comandline (example in START.sh)

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: Etar on November 29, 2016, 12:34:23 PM

LINUX version Etarminer 1_8 available
https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms
Tested on Ubuntu 16.04

Code:

root@kopiemtu:~/ETAR# ./Etarminer -url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass
[START launcher]
[START EtarminerSecondary]

(EtarminerSecondary:10657): Gtk-WARNING **: cannot open display:
[restart miner]-url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass

(EtarminerSecondary:10685): Gtk-WARNING **: cannot open display:
[restart miner]-url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass

(EtarminerSecondary:10722): Gtk-WARNING **: cannot open display:
[restart miner]-url http://coinotron.com:3344 -wlt jk_14.w015 -eml pass

And is it possible to run it without GUI ?
i.e. after:
service lightdm stop

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: giagge on November 27, 2016, 02:45:48 PM

Claymore 7.4 with gtx 1070 27mhs for card in my system On Windows 10 .

claymore 6.3 with gtx 1070 33mhs for card in my system On Windows 7 )) 65%tdp

Etar

sr. member

Activity: 642

Merit: 316

LINUX version Etarminer 1_8 available
https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms
Tested on Ubuntu 16.04

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: giagge on November 27, 2016, 06:46:06 AM

Win 10 is more fast to win 7 .

Claymore 7.4 with gtx 1070 , and windows 10 last update and last nvidia driver have 27mhs for card in my system .

That's not as fast as I'm seeing under Win 7 as I previously posted, much less "more fast".

Win 10 is widely reported to have issues with some of the NVidia driver versions - seems to be VERY picky there - but with the "correct" driver version(s) is about the same as Win 7.

giagge

legendary

Activity: 1134

Merit: 1001

Claymore 7.4 with gtx 1070 27mhs for card in my system On Windows 10 .

.

.

Etar

sr. member

Activity: 642

Merit: 316

Quote from: tc61 on November 27, 2016, 02:02:53 PM

Etar,

Im using win 10

Oh,, at win 10 i have 3Mh/s on GTX1060

)) I am not fix slow execution at win10 yet...
At WIN7, Linux, Vista64 work fine!
What driver you are used? And what version and build WIN10?

tc61

hero member

Activity: 494

Merit: 500

Etar,

Im using win 10

Etar

sr. member

Activity: 642

Merit: 316

Quote from: lethax on November 04, 2016, 05:58:19 PM

linux support?

Soon.. Today i am launch etarminer at Ubuntu 16.04

Etar

sr. member

Activity: 642

Merit: 316

Quote from: tc61 on November 27, 2016, 11:09:30 AM

What is your launch config look like, im only getting 20 on my 1070

thx

what os?

-exp 0 -wsz 64

tc61

hero member

Activity: 494

Merit: 500

What is your launch config look like, im only getting 20 on my 1070

thx

giagge

legendary

Activity: 1134

Merit: 1001

Win 10 is more fast to win 7 .

Claymore 7.4 with gtx 1070 , and windows 10 last update and last nvidia driver have 27mhs for card in my system .

Etar

sr. member

Activity: 642

Merit: 316

Quote from: reb0rn21 on November 27, 2016, 02:51:58 AM

Quote from: Etar on November 27, 2016, 02:11:26 AM

Quote from: reb0rn21 on November 26, 2016, 07:04:09 PM

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

Are you using Windows 10 anniversary version 1607?

after they fixed TLB on nvidia with wddm 2.1, I can say win7 is faster with claymore and genoil under win7 at all

Win10 version 1607 build 14393.447
Strange things:
Random access to memory slows down execution..
But if access only to one memory adress - all work fine.
I think, something nvidia is not fixed..

reb0rn21

legendary

Activity: 1901

Merit: 1024

Quote from: Etar on November 27, 2016, 02:11:26 AM

Quote from: reb0rn21 on November 26, 2016, 07:04:09 PM

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

Are you using Windows 10 anniversary version 1607?

after they fixed TLB on nvidia with wddm 2.1, I can say win7 is faster with claymore and genoil under win7 at all

Etar

sr. member

Activity: 642

Merit: 316

Quote from: reb0rn21 on November 26, 2016, 07:04:09 PM

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: kyne on November 25, 2016, 01:28:56 AM

Quote from: Etar on November 24, 2016, 01:07:07 PM

Quote from: kyne on November 24, 2016, 02:16:58 AM

Hello Etar, I got an error can't run. I'm using GTX660

Code:

24/11/13:44:47:Start miner

24/11/13:44:50:Gpu0 error cuMemAlloc(Dag)-2
1479995090GPU0 error in dagfunction

your gtx 660 maybe have only 2Gb memory?

Yes, 2G Memory is not enough to mine ETH right ?

It's getting very marginal at best - I just realised a couple of nights back I didn't have ant of my rigs with 2GB cards back online yet - turns out my pair of 2GB HD 7870s can still run ETH but they're 60-80% more profitable on ZEC right now, so I'll probably just leave them pointed that way even when the profitability drops back to parity ballpark.
Moving over to ETC might also be an option, it's generally very close on profitability to ETH.

For comparison - Genoil 1.1.13 on my 1070 rigs with Afterburner set for +550 memory, -200 core, 75% power limit pull 28-29 Mh/s under Windows 7 with the 372.70 drivers. I've had nothing but ISSUES out of any of the 375 series, and NVidia has stated in at least one of their "known issues" on one of the 375 series drivers that they had problems with Folding@home - I suspect that issue likely ALSO affects mining.

reb0rn21

legendary

Activity: 1901

Merit: 1024

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

Nikolaj

sr. member

Activity: 445

Merit: 255

28/29 (+600 ram) on 8.1 64 bit, 1070 stock Wink

Topic: Etarminer - New cuda miner for ethereum (Read 17973 times)