Ethash DAG epoch RX470/480/570/580 FIX !! - page 23.

manotroll

sr. member

Activity: 305

Merit: 250

Quote from: vanlong on August 07, 2017, 11:14:15 PM

Quote from: manotroll on August 07, 2017, 07:45:17 PM

RX 480 29mh/s

same me. msi 480 gaming x 4Gb hynix Vram
Can up to ~31mhs but miner can't work long time and to use total 580W . 3 vga+main... . In the CPUZ is 120~130W

I adjusted speed down to 29mhs and to use total 465W . CPUZ use 83W/Vga

Your consumption is very high
And had to go back to the previous driver
Because of the error it crashes with code 52 because it is not signed: \

Gunna01

sr. member

Activity: 306

Merit: 251

Quote from: Jbodz83 on August 08, 2017, 03:50:59 PM

How was the effective hashrate using this driver? is the reported hashrate in your rigs the same at the pool sites? Embarrassed

Hash rate reported by the pool and the miner are the same.

cidman

full member

Activity: 162

Merit: 102

wonder if nvidia is gonna fix the TLB thrashing too
might be able to dust off the 750tis for 10Mh at 75 watts

Jbodz83

newbie

Activity: 124

Merit: 0

How was the effective hashrate using this driver? is the reported hashrate in your rigs the same at the pool sites? Embarrassed

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: P00P135 on August 08, 2017, 04:27:28 AM

Quote from: adaseb on August 08, 2017, 04:21:43 AM

So nobody tried this out with their R9 280X yet?

Why would they?

Because if they fixed it on the 280X it would hash at 28MH/s like the Epoch #1

karoolis

newbie

Activity: 3

Merit: 0

Quote from: gleidsonrpm on August 08, 2017, 12:41:52 PM

Quote from: karoolis on August 08, 2017, 11:36:27 AM

Quote from: gleidsonrpm on August 08, 2017, 11:33:37 AM

Can someone help me please
http://i.picasion.com/resize86/464ac2bfe7c899d03dab9290df126e68.png

I already used ddu

patch your previouse drivers first.

Thank you all RX 470 and 480 running

http://i.picasion.com/resize86/595fe39b0a1944c491e4086d078af75a.png

what about power consumption from wall?

gleidsonrpm

newbie

Activity: 12

Merit: 0

Quote from: karoolis on August 08, 2017, 11:36:27 AM

Quote from: gleidsonrpm on August 08, 2017, 11:33:37 AM

Can someone help me please
http://i.picasion.com/resize86/464ac2bfe7c899d03dab9290df126e68.png

I already used ddu

patch your previouse drivers first.

Thank you all RX 470 and 480 running

http://i.picasion.com/resize86/595fe39b0a1944c491e4086d078af75a.png

karoolis

newbie

Activity: 3

Merit: 0

Quote from: gleidsonrpm on August 08, 2017, 11:33:37 AM

Can someone help me please
http://i.picasion.com/resize86/464ac2bfe7c899d03dab9290df126e68.png

I already used ddu

patch your previouse drivers first.

gleidsonrpm

newbie

Activity: 12

Merit: 0

Can someone help me please
http://i.picasion.com/resize86/464ac2bfe7c899d03dab9290df126e68.png

I already used ddu

karoolis

newbie

Activity: 3

Merit: 0

So update went fine.

from 217 Mh/s UP to 230 Mh/s for my 8 GPU rig.

but all the good news ended then checked the watmeter and it was 1460w from wall instead of 1200w.

AB 4.4.0 beta 15 has no changes on wattmeter from wall while adjusting core voltage...

cdrx

full member

Activity: 441

Merit: 109

I am first timer. I have latest official update from AMD, modded bios with changed timings. and used atikmdag-patcher

To update, do I need to use again atikmdag-patcher to UNPATCH and restart.

Then update the driver with BETA ? and then use again atikmdag-patcher. Am I right ? Or else ? Thx. If I would have used also Afterburner, would I need to reset all to original, before updating, or will be saved?

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: bijac666 on August 08, 2017, 08:45:27 AM

The driver gives a nice update to my Rx 570 cards,
but I noticed that the power usage pulling from the wall goes crazy.

Before I had five rx 570 at 1105/2200 850mV cpu/mem voltage and it pulled 730W from wall.

After the driver update with the same settings I get 2.2MH/s more but the voltage from the wall is going crazy. Jumping from 530W up to 980W, does someone know the reason and how to fix it?
Did anyone else notice this?

Yes, voltage control does not work from Watttool or Claymore with this driver update. You need to use afterburner or trixx to downvolt your cards for the moment, or mod it in the bios.

papi92

jr. member

Activity: 59

Merit: 1

gleidsonrpm, you don't have to flash original bios. Just update the driver.

gleidsonrpm

newbie

Activity: 12

Merit: 0

My 4 rx 470 is with bios mod,
To upgrade do I have that back to the original bios?
Or can I upgrade with mod bios?

bijac666

newbie

Activity: 11

Merit: 0

The driver gives a nice update to my Rx 570 cards,
but I noticed that the power usage pulling from the wall goes crazy.

Before I had five rx 570 at 1105/2200 850mV cpu/mem voltage and it pulled 730W from wall.

After the driver update with the same settings I get 2.2MH/s more but the voltage from the wall is going crazy. Jumping from 530W up to 980W, does someone know the reason and how to fix it?
Did anyone else notice this?

LoneRangir

hero member

Activity: 615

Merit: 500

Quote from: Marvell1 on August 07, 2017, 02:44:03 PM

I dont know if its bug with the drivers or the 9.8 version of claymore but on about half my machines

the hash rate goes from 28ms or so to 8 and stays there till i have to reboot the rigs

I find that if I go into WattMan and toggle 'Voltage Control' and hit apply, the card will go back to hashing at full rate. You don't have to actually change any voltage settings, but just flip the mode it unsticks the card.

I've been having to do this to my RX480 cards for months. Not so much for the RX470s.

deevilknight

jr. member

Activity: 37

Merit: 10

For which Windows are this drivers? How to install them, when i click on update display driver from device manager and try to navigate in folder where i unpack this drivers he doesn't see that folder.

gog1984

newbie

Activity: 7

Merit: 0

Quote from: adaseb on August 08, 2017, 04:21:43 AM

So nobody tried this out with their R9 280X yet?

just tried, no effect on 7950 and 280x.

BUT! IT WOKS ON 380!!! Grin

h311m4n

sr. member

Activity: 487

Merit: 266

Quote from: adaseb on August 08, 2017, 04:21:43 AM

So nobody tried this out with their R9 280X yet?

I believe this is specifically targeted at polaris cards. Why don't you try yourself as you seem to own some?...

Quote from: pornluver on August 08, 2017, 06:09:12 AM

What problems is this?

My rigs are still running fine.

The problem is the hashrate drop for Polaris based cards mining ether because of the DAG.

pornluver

hero member

Activity: 960

Merit: 514

What problems is this?

My rigs are still running fine.

Topic: Ethash DAG epoch RX470/480/570/580 FIX !! - page 23. (Read 151594 times)