but does not run on win7 ..
Is there a driver for win7?
Topic: Ethash DAG epoch RX470/480/570/580 FIX !! - page 21. (Read 151564 times)
I've tried to win 10 running smoothly..
but does not run on win7 ..
Is there a driver for win7?
but does not run on win7 ..
Is there a driver for win7?
There's definitely something wrong with your setup. You should be getting about 24 at stock. EDIT: or maybe 22 since they are 4gb
I really do not think so, I have 6 Asus Rog Rx 470 4G hynix, 1 Gygabyte Rx 470 4Gb gaming 1 hynix, and 2 XFX Rx 470 4Gb samsung dual BIOS.
Except for the XFX (Which seemed to be already overclocked), all of them hits 20 at stock, I tried claymore 9.5, 9.7 and windows and linux.
Overclocked all cards gets 24,5 in windows (linux stays 20)
This is what a 470 can do.
http://imgur.com/a/8ajS4
You can say there's nothing wrong when you achieve this.
Do you know anything about the official amd drivers? At the moment they work very well theirs, but would be fine if they improve something, there is difference of gpu from 4 Gb to 8GB?
Thanks Genius!
Thanks Genius!
you will just have to wait for the official nix driver
This is great - Thank you for sharing!
I see the question asked several times without answer though.
What about Linux version for those folks using EthOS or plain ol' Linux?
I see the question asked several times without answer though.
What about Linux version for those folks using EthOS or plain ol' Linux?
I have a rig with 6 Asus Rx470 4Gb, and my hashrate was unaltered for the DAG epoch, every card is doing ~24,5mh sinces June which I started. How can I see the modifications?
Have you modded the bios of your cards? With modded bios and before the decrease in hashrate, modded cards were doing 29+ MH/s.
I modded bios, on June, they mine ~20mh/s stock, with modded bios they mine ~24,5 and they continue at that value. How can I get 29?
Hi, you need to OC your gpus to reach 27 - 28MHs
Take your mem clock to 1900 - 2100 on msi afterburner - use the new beta, as it works with this dag fix driver.
Take your core clock to 1000 - 1100 on msi AB
find what is stable, then start under volting, I under volt to -96v
you need to find what works with your gpus.
link to AB beta 15
http://www.overclock.net/t/1635685/g3d-msi-afterburner-4-4-0-beta-15
Hope this helps.
Gonna try it, I used Polaris BIOS Editor with the atiflash tool, I have read that overclock memory above 1750 is not recommended.
I have a rig with 6 Asus Rx470 4Gb, and my hashrate was unaltered for the DAG epoch, every card is doing ~24,5mh sinces June which I started. How can I see the modifications?
Have you modded the bios of your cards? With modded bios and before the decrease in hashrate, modded cards were doing 29+ MH/s.
I modded bios, on June, they mine ~20mh/s stock, with modded bios they mine ~24,5 and they continue at that value. How can I get 29?
Hi, you need to OC your gpus to reach 27 - 28MHs
Take your mem clock to 1900 - 2100 on msi afterburner - use the new beta, as it works with this dag fix driver.
Take your core clock to 1000 - 1100 on msi AB
find what is stable, then start under volting, I under volt to -96v
you need to find what works with your gpus.
link to AB beta 15
http://www.overclock.net/t/1635685/g3d-msi-afterburner-4-4-0-beta-15
Hope this helps.
There's definitely something wrong with your setup. You should be getting about 24 at stock. EDIT: or maybe 22 since they are 4gb
I really do not think so, I have 6 Asus Rog Rx 470 4G hynix, 1 Gygabyte Rx 470 4Gb gaming 1 hynix, and 2 XFX Rx 470 4Gb samsung dual BIOS.
Except for the XFX (Which seemed to be already overclocked), all of them hits 20 at stock, I tried claymore 9.5, 9.7 and windows and linux.
Overclocked all cards gets 24,5 in windows (linux stays 20)
Can someone please verify that this is not VIR. I do not know how it's done? So that we do not get Mh/s
Finally decided not to wait for the official release anymore and try this out.
I'm surprised to say that no other driver until now was as efficient as this one.
Hashrates are back to what they used to be + effective hashrate is above reported.
Hope it's not just luck, only been running for a few hours.
No problems at install apart from a code 43 error easily fixed with the pixelpatcher.
I have Sapphires. Using -mclock and Trixx for undervolt and fan curve.
So far so good...
Have you modded the bios of your cards? With modded bios and before the decrease in hashrate, modded cards were doing 29+ MH/s.
I modded bios, on June, they mine ~20mh/s stock, with modded bios they mine ~24,5 and they continue at that value. How can I get 29?
There's definitely something wrong with your setup. You should be getting about 24 at stock. EDIT: or maybe 22 since they are 4gb
I'm surprised to say that no other driver until now was as efficient as this one.
Hashrates are back to what they used to be + effective hashrate is above reported.
Hope it's not just luck, only been running for a few hours.
No problems at install apart from a code 43 error easily fixed with the pixelpatcher.
I have Sapphires. Using -mclock and Trixx for undervolt and fan curve.
So far so good...
I have a rig with 6 Asus Rx470 4Gb, and my hashrate was unaltered for the DAG epoch, every card is doing ~24,5mh sinces June which I started. How can I see the modifications?
Have you modded the bios of your cards? With modded bios and before the decrease in hashrate, modded cards were doing 29+ MH/s.
I modded bios, on June, they mine ~20mh/s stock, with modded bios they mine ~24,5 and they continue at that value. How can I get 29?
There's definitely something wrong with your setup. You should be getting about 24 at stock. EDIT: or maybe 22 since they are 4gb
I have a rig with 6 Asus Rx470 4Gb, and my hashrate was unaltered for the DAG epoch, every card is doing ~24,5mh sinces June which I started. How can I see the modifications?
Have you modded the bios of your cards? With modded bios and before the decrease in hashrate, modded cards were doing 29+ MH/s.
I modded bios, on June, they mine ~20mh/s stock, with modded bios they mine ~24,5 and they continue at that value. How can I get 29?
Hello,
I have a problem with Sapphire RX 570 8GB (MICRON)
I had a 7GPU 195 Mh / s and when I loaded the driver the performance went down to around 180 Mhs / s
Everything in the manual I did exactly, but on the MSI RX 470 8GB there performance on the RIG jumped back by 5 Mhs more. I just have a problem at 570.
Do you have any advice?
I have a problem with Sapphire RX 570 8GB (MICRON)
I had a 7GPU 195 Mh / s and when I loaded the driver the performance went down to around 180 Mhs / s
Everything in the manual I did exactly, but on the MSI RX 470 8GB there performance on the RIG jumped back by 5 Mhs more. I just have a problem at 570.
Do you have any advice?
I have a rig with 6 Asus Rx470 4Gb, and my hashrate was unaltered for the DAG epoch, every card is doing ~24,5mh sinces June which I started. How can I see the modifications?
Have you modded the bios of your cards? With modded bios and before the decrease in hashrate, modded cards were doing 29+ MH/s.
I have a rig with 6 Asus Rx470 4Gb, and my hashrate was unaltered for the DAG epoch, every card is doing ~24,5mh sinces June which I started. How can I see the modifications?
It's getting a little bit confusing, does anybody have any idea when the official release of the DAG fixing driver will be out?
Best regards
Harry
Best regards
Harry
Can someone with more knowledge do a complete scan of this to be 100% sure this is virus free?
I just want to mention, this driver is used for more then a week, I personally use it and my friend with huge pool, with more then 600 gpu's, all of them 470/480, working like a charm.
Just to be clear:
1. You must use Clymore v9.8
2. Use -cclock / -mclock in Clymore, to control clocks of your gpu's
3. For voltage use AB, it is working well. I personally test, voltage control working fine via AB, fan control to, just gpu/mem clocks need to be used via Clymore commands.
There is some minor bugs with RX570 cards and new Clymore, but it is also something what can be solved easy.
robin, i have rig with 8 gpus rx 580 gigabyte and test the driver. i use claymore v9.8 with clock and vddc settings without AB. after i update with fixed driver my hashrate drop down to 15 - 20 hash per cards. what would be the reason for this problem? Just to be clear:
1. You must use Clymore v9.8
2. Use -cclock / -mclock in Clymore, to control clocks of your gpu's
3. For voltage use AB, it is working well. I personally test, voltage control working fine via AB, fan control to, just gpu/mem clocks need to be used via Clymore commands.
There is some minor bugs with RX570 cards and new Clymore, but it is also something what can be solved easy.
I do not have any interest in hack someones computer, I just want to help you guys.
Once again, this is 100% safe to download and install. I don't care if someone don't want to install it and get higher hash rate, it is your choice, of course.
At least all of you can do it on one PC, test for a couple of days, later you will realize that this is working, as all around peoples confirm.
@Cypher-
I understand your fear, but if you try it maybe you will consider some donation to me.
Let me be clear, if I want, first I can contact someone from here, try to sell this(undercover), but I did not do it, so.... I choose to put this on the web totally free. Everyone can try and see that this is working, literally I put an extra money in their pocket. The end.
If someone are will to donate, please be my guest.
Once again, this is 100% safe to download and install. I don't care if someone don't want to install it and get higher hash rate, it is your choice, of course.
At least all of you can do it on one PC, test for a couple of days, later you will realize that this is working, as all around peoples confirm.
@Cypher-
I understand your fear, but if you try it maybe you will consider some donation to me.
Let me be clear, if I want, first I can contact someone from here, try to sell this(undercover), but I did not do it, so.... I choose to put this on the web totally free. Everyone can try and see that this is working, literally I put an extra money in their pocket. The end.
If someone are will to donate, please be my guest.
All good and I will revamp my opinion when that time comes. Its not that you would hack someones computer but why was it was person not well known release this? Also after claymore stated the dag driver fix on the 29th should your latest modified file be the 27th? Robin... Join me on IRC if this is legit then you sir are a 0day provider like me.
I do not have any interest in hack someones computer, I just want to help you guys.
Once again, this is 100% safe to download and install. I don't care if someone don't want to install it and get higher hash rate, it is your choice, of course.
At least all of you can do it on one PC, test for a couple of days, later you will realize that this is working, as all around peoples confirm.
@Cypher-
I understand your fear, but if you try it maybe you will consider some donation to me.
Let me be clear, if I want, first I can contact someone from here, try to sell this(undercover), but I did not do it, so.... I choose to put this on the web totally free. Everyone can try and see that this is working, literally I put an extra money in their pocket. The end.
If someone are will to donate, please be my guest.
Once again, this is 100% safe to download and install. I don't care if someone don't want to install it and get higher hash rate, it is your choice, of course.
At least all of you can do it on one PC, test for a couple of days, later you will realize that this is working, as all around peoples confirm.
@Cypher-
I understand your fear, but if you try it maybe you will consider some donation to me.
Let me be clear, if I want, first I can contact someone from here, try to sell this(undercover), but I did not do it, so.... I choose to put this on the web totally free. Everyone can try and see that this is working, literally I put an extra money in their pocket. The end.
If someone are will to donate, please be my guest.
To be found one must be detected. I dont need proof, all I am saying is look at dates. If Claymore stated on the 29th a new driver is underway via AMD then why are the files included in this fix from the 27th.
I am just giving my opinion... However, who the hell trusts someone with 7 posts I guess its the way it works...
No need for proof. I am not a programmer but common sense is common sense.
I am behind the times on scanning/rooting/injection etc. I just seen red flags..
That is all.
I am just giving my opinion... However, who the hell trusts someone with 7 posts I guess its the way it works...
No need for proof. I am not a programmer but common sense is common sense.
I am behind the times on scanning/rooting/injection etc. I just seen red flags..
That is all.
AMD already had the fix, they gave to claymore on set date for him to test and who knows else amd gave the fix to or probably somebody sold to somebody. I myself did not find any malicious file or behavior. Feel free anybody to search it and show to us here. However I would not use this on may main computer and if you are sane then you should do the same, never use this driver on your main computer.
Jump to: