[ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 17.

raidersan

newbie

Activity: 36

Merit: 0

Hi,

I have just started mining successfully through Sammy's proxy latest (v0.4.5), but it is complaining every few minutes with the following message:

Code:

2016/02/17 16:15:45 Upstream submission failure on height 1018548: json: cannot unmarshal string into Go value of type map[string]in

My efficiency seem to be less than 100% if that is related at all...
What could be happening?
Thanks!

mwgame1

sr. member

Activity: 263

Merit: 250

Quote

your -F pool is still configured wrong. Don't use your worker password in there, it's not used for anything. Yours should be /MWGame1.mwgame1/20

thx very much worked

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: melloyellow on February 16, 2016, 02:39:44 PM

Quote from: Pansyfaust on February 16, 2016, 02:32:40 PM

Quote from: melloyellow on February 16, 2016, 02:14:23 PM

Quote from: Pansyfaust on February 16, 2016, 02:12:59 PM

Quote from: melloyellow on February 16, 2016, 02:01:48 PM

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Also your bat needs to look like this
ethminer -G -F http://127.0.0.1:8546/miner/Hashrate/RigName --parameter --parameter

You're forgetting the stuff after the port

Yeah still not working. Might it be because I don't/cant have geth installed on my local machine?

No you don't need it

Check out my post here https://bitcointalk.org/index.php?topic=1163395.msg13839592#msg13839592

You rock dude, got it working. I've been mining so long without getting the maximum hashrate, so this is great. Thanks a bunch. BTC addy?

You're welcome. Don't worry about paying me anything, though I appreciate the sentiment [unless you have 1000 gpus

]

I wish XD. I have 4, so a small fish in a small pond Tongue

melloyellow

full member

Activity: 176

Merit: 100

Quote from: Pansyfaust on February 16, 2016, 02:32:40 PM

Quote from: melloyellow on February 16, 2016, 02:14:23 PM

Quote from: Pansyfaust on February 16, 2016, 02:12:59 PM

Quote from: melloyellow on February 16, 2016, 02:01:48 PM

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Also your bat needs to look like this
ethminer -G -F http://127.0.0.1:8546/miner/Hashrate/RigName --parameter --parameter

You're forgetting the stuff after the port

Yeah still not working. Might it be because I don't/cant have geth installed on my local machine?

No you don't need it

Check out my post here https://bitcointalk.org/index.php?topic=1163395.msg13839592#msg13839592

You rock dude, got it working. I've been mining so long without getting the maximum hashrate, so this is great. Thanks a bunch. BTC addy?

You're welcome. Don't worry about paying me anything, though I appreciate the sentiment [unless you have 1000 gpus

]

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: melloyellow on February 16, 2016, 02:14:23 PM

Quote from: Pansyfaust on February 16, 2016, 02:12:59 PM

Quote from: melloyellow on February 16, 2016, 02:01:48 PM

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Also your bat needs to look like this
ethminer -G -F http://127.0.0.1:8546/miner/Hashrate/RigName --parameter --parameter

You're forgetting the stuff after the port

Yeah still not working. Might it be because I don't/cant have geth installed on my local machine?

No you don't need it

Check out my post here https://bitcointalk.org/index.php?topic=1163395.msg13839592#msg13839592

You rock dude, got it working. I've been mining so long without getting the maximum hashrate, so this is great. Thanks a bunch. BTC addy?

melloyellow

full member

Activity: 176

Merit: 100

Quote from: Pansyfaust on February 16, 2016, 02:12:59 PM

Quote from: melloyellow on February 16, 2016, 02:01:48 PM

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Also your bat needs to look like this
ethminer -G -F http://127.0.0.1:8546/miner/Hashrate/RigName --parameter --parameter

You're forgetting the stuff after the port

Yeah still not working. Might it be because I don't/cant have geth installed on my local machine?

No you don't need it

Check out my post here https://bitcointalksearch.org/topic/m.13839592

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: melloyellow on February 16, 2016, 02:01:48 PM

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Also your bat needs to look like this
ethminer -G -F http://127.0.0.1:8546/miner/Hashrate/RigName --parameter --parameter

You're forgetting the stuff after the port

Yeah still not working. Might it be because I don't/cant have geth installed on my local machine? Also nothing happens (err connection etc) when I type that IP into my browser (at home and on my mining rig not at home)

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Sorry, I meant firewall. Trying again

melloyellow

full member

Activity: 176

Merit: 100

Quote from: melloyellow on February 16, 2016, 01:56:46 PM

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Also your bat needs to look like this
ethminer -G -F http://127.0.0.1:8546/miner/Hashrate/RigName --parameter --parameter

You're forgetting the stuff after the port

melloyellow

full member

Activity: 176

Merit: 100

Quote from: Pansyfaust on February 16, 2016, 01:36:33 PM

I'm mining behind a proxy,so might that be an issue?

Sorry what do you mean "mining behind a proxy"? What happens when you type 127.0.0.1:8080 into your browser? Try different browsers, some don't like that.

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: melloyellow on February 16, 2016, 12:26:22 PM

Quote from: Pansyfaust on February 16, 2016, 12:19:35 PM

Quote from: melloyellow on February 16, 2016, 11:07:08 AM

Quote from: Pansyfaust on February 16, 2016, 06:51:24 AM

I'm still getting horrible hashrate. Hashrate is bouncing all over the place on the dashboard, but in windows its around 92Mhs, but on the website graph shows my average is between 70Mhs and 83Mhs.

I am running the proxy as well, but I really don't know if it's working?

My earning for the last day was 2 Eth. Much lower than the 3 estimated for my hashrate.

https://i.imgur.com/vGN4wDI.png

We can't tell if you're using the proxy or not unless you post your ethminer bat.

According to this http://karldiab.com/EthereumMiningCalculator/ you're getting paid for 70-83 mh/s like the pool says. Maybe try another one of suprnova's pools. Ping them all to find the lowest latency.

This is my bat:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
SETX GPU_MAX_HEAP_SIZE 100
ethminer --cl-local-work 256 --cl-global-work 8192 -G --opencl-platform 1 -F http://80-eth.suprnova.cc:80/xxxxx.x/95 --farm-recheck 100

You're not using the proxy, you're going straight to the pool. Since your miner is located on the same machine as the proxy it should be

ethminer --cl-local-work 256 --cl-global-work 8192 -G --opencl-platform 1 -F http://127.0.0.1:8546

Don't use the farm recheck

I've tried that, and getting this:

I'm mining behind a proxy,so might that be an issue?

melloyellow

full member

Activity: 176

Merit: 100

Quote from: Pansyfaust on February 16, 2016, 12:19:35 PM

Quote from: melloyellow on February 16, 2016, 11:07:08 AM

Quote from: Pansyfaust on February 16, 2016, 06:51:24 AM

I'm still getting horrible hashrate. Hashrate is bouncing all over the place on the dashboard, but in windows its around 92Mhs, but on the website graph shows my average is between 70Mhs and 83Mhs.

I am running the proxy as well, but I really don't know if it's working?

My earning for the last day was 2 Eth. Much lower than the 3 estimated for my hashrate.

https://i.imgur.com/vGN4wDI.png

We can't tell if you're using the proxy or not unless you post your ethminer bat.

According to this http://karldiab.com/EthereumMiningCalculator/ you're getting paid for 70-83 mh/s like the pool says. Maybe try another one of suprnova's pools. Ping them all to find the lowest latency.

This is my bat:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
SETX GPU_MAX_HEAP_SIZE 100
ethminer --cl-local-work 256 --cl-global-work 8192 -G --opencl-platform 1 -F http://80-eth.suprnova.cc:80/xxxxx.x/95 --farm-recheck 100

You're not using the proxy, you're going straight to the pool. Since your miner is located on the same machine as the proxy it should be

ethminer --cl-local-work 256 --cl-global-work 8192 -G --opencl-platform 1 -F http://127.0.0.1:8546

Don't use the farm recheck

Pansyfaust

full member

Activity: 212

Merit: 100

Quote from: melloyellow on February 16, 2016, 11:07:08 AM

Quote from: Pansyfaust on February 16, 2016, 06:51:24 AM

I'm still getting horrible hashrate. Hashrate is bouncing all over the place on the dashboard, but in windows its around 92Mhs, but on the website graph shows my average is between 70Mhs and 83Mhs.

I am running the proxy as well, but I really don't know if it's working?

My earning for the last day was 2 Eth. Much lower than the 3 estimated for my hashrate.

https://i.imgur.com/vGN4wDI.png

We can't tell if you're using the proxy or not unless you post your ethminer bat.

According to this http://karldiab.com/EthereumMiningCalculator/ you're getting paid for 70-83 mh/s like the pool says. Maybe try another one of suprnova's pools. Ping them all to find the lowest latency.

This is my bat:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
SETX GPU_MAX_HEAP_SIZE 100
ethminer --cl-local-work 256 --cl-global-work 8192 -G --opencl-platform 1 -F http://80-eth.suprnova.cc:80/xxxxx.x/95 --farm-recheck 100

melloyellow

full member

Activity: 176

Merit: 100

Quote from: Pansyfaust on February 16, 2016, 06:51:24 AM

I'm still getting horrible hashrate. Hashrate is bouncing all over the place on the dashboard, but in windows its around 92Mhs, but on the website graph shows my average is between 70Mhs and 83Mhs.

I am running the proxy as well, but I really don't know if it's working?

My earning for the last day was 2 Eth. Much lower than the 3 estimated for my hashrate.

https://i.imgur.com/vGN4wDI.png

We can't tell if you're using the proxy or not unless you post your ethminer bat.

According to this http://karldiab.com/EthereumMiningCalculator/ you're getting paid for 70-83 mh/s like the pool says. Maybe try another one of suprnova's pools. Ping them all to find the lowest latency.

melloyellow

full member

Activity: 176

Merit: 100

Quote from: citronick on February 16, 2016, 04:30:59 AM

Quote from: citronick on February 15, 2016, 11:54:23 AM

Hi ocminer,
I am trying to get ethminer to work my GT740 on my PC but it always uses the onboard Intel HD4600 by default when attempting to create the DAG. Is there a way to force ethminer to use the GT740 instead. Sorry if this is a nebie question.... Thanks!

bump up!

for open cl there is something like --opencl-platform but I'm not sure what it is for cuda. Probably better to ask here https://forum.ethereum.org/categories/mining

melloyellow

full member

Activity: 176

Merit: 100

Quote from: mwgame1 on February 16, 2016, 08:20:10 AM

Quote

you're running 2 instances of ethminer. your bat file essentially starts ethminer with -G and -F parameters, thats all you need. So start your coinmine.cuda bat file and let it run for a few minutes to allow your hashrate to show up at suprnova. if it doesn't show up then you....wait a second...youre mining at coinmine and trying to look up your hashrate at suprnova. change the coinmine.pl to one of suprnova's pools like http://eth-us.suprnova.cc:3000/suprnova.5/50 depending where you live

am i missing something ?
cuz iam getting no hashrate on the dashboard

http://imgur.com/9omHtFw

i changed it from EU to US , but EU is closer waited couple mins and same thing

EDIT : after sometime i got 0.001eth on my balance but that mh\s is 0 , should i care ?

your -F pool is still configured wrong. Don't use your worker password in there, it's not used for anything. Yours should be /MWGame1.mwgame1/20

mwgame1

sr. member

Activity: 263

Merit: 250

Quote

you're running 2 instances of ethminer. your bat file essentially starts ethminer with -G and -F parameters, thats all you need. So start your coinmine.cuda bat file and let it run for a few minutes to allow your hashrate to show up at suprnova. if it doesn't show up then you....wait a second...youre mining at coinmine and trying to look up your hashrate at suprnova. change the coinmine.pl to one of suprnova's pools like http://eth-us.suprnova.cc:3000/suprnova.5/50 depending where you live

am i missing something ?
cuz iam getting no hashrate on the dashboard

http://imgur.com/9omHtFw

i changed it from EU to US , but EU is closer waited couple mins and same thing

EDIT : after sometime i got 0.001eth on my balance but that mh\s is 0 , should i care ?

Pansyfaust

full member

Activity: 212

Merit: 100

I'm still getting horrible hashrate. Hashrate is bouncing all over the place on the dashboard, but in windows its around 92Mhs, but on the website graph shows my average is between 70Mhs and 83Mhs.

I am running the proxy as well, but I really don't know if it's working?

My earning for the last day was 2 Eth. Much lower than the 3 estimated for my hashrate.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: citronick on February 15, 2016, 11:54:23 AM

Hi ocminer,
I am trying to get ethminer to work my GT740 on my PC but it always uses the onboard Intel HD4600 by default when attempting to create the DAG. Is there a way to force ethminer to use the GT740 instead. Sorry if this is a nebie question.... Thanks!

bump up!

tylerderden

copper member

Activity: 1162

Merit: 1025

Quote from: klondike_bar on February 15, 2016, 11:51:28 PM

Quote from: gold368 on February 13, 2016, 06:45:59 AM

Quote from: ocminer on February 13, 2016, 04:19:08 AM

Quote from: gold368 on February 13, 2016, 02:20:39 AM

I have a problem

Looks like you have too low memory. you need at least 2 GB RAM for the card in order to get the DAG loading

memory 6G
Creating one big buffer for the DAG
Allocating/mapping single buffer failed with: clCreateBuffer(-61). GPU can't allocate the DAG in a single chunk. Bailing.
clEnqueueWriteBuffer(-38)

go to %appdata%/local/ethashing and delete all the DAG files inside (~1.2GB each) and then rerun ethminer. I had that happen when i added a GPU and it took me all dy trying different batch file commands before simply deleting all the stored DAG files worked like a charm

I had to install new drivers and delete the DAG that fixed it for me

Topic: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 17. (Read 99527 times)