ethminer-0.9.41-genoil-1.1 - page 14.

felixbrucker

hero member

Activity: 700

Merit: 500

Quote from: Genoil on November 14, 2016, 05:23:33 PM

Quote from: felixbrucker on November 14, 2016, 05:10:47 PM

ethminer still has no api? :/

I'm no longer maintaining this fork. After the great Claymore-exodus and Hardforks, the motivation to work on it dropped to the level of the amount of donations I was still getting in. It's been great fun though, wouldn't have wanted to miss it for the world. Grin

.

So, no API. I doubt anyone else, other than @nerdralph perhaps, will fork on and pick up feature development.

ok thanks for clarifying!

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: felixbrucker on November 14, 2016, 05:10:47 PM

ethminer still has no api? :/

I'm no longer maintaining this fork. After the great Claymore-exodus and Hardforks, the motivation to work on it dropped to the level of the amount of donations I was still getting in. It's been great fun though, wouldn't have wanted to miss it for the world. Grin

.

So, no API. I doubt anyone else, other than @nerdralph perhaps, will fork on and pick up feature development.

felixbrucker

hero member

Activity: 700

Merit: 500

ethminer still has no api? :/

bitstomake

member

Activity: 111

Merit: 10

thanks guys. its because if I go full force it overheats and crashes my system Sad

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: bitstomake on November 10, 2016, 12:19:14 PM

Hello,

Is there a command to set the miner to perform at 80% power rather than automatically 100%?

No, but you can create that effect by using a local-work value less than 64. I'd try 48 first and go from there.

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: bitstomake on November 10, 2016, 12:19:14 PM

Hello,

Is there a command to set the miner to perform at 80% power rather than automatically 100%?

Why do you need this?
I am afraid not but check ethminer -h for available commands.

bitstomake

member

Activity: 111

Merit: 10

Hello,

Is there a command to set the miner to perform at 80% power rather than automatically 100%?

cryptohunter

legendary

Activity: 2100

Merit: 1167

MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG

how to engage pool swap into bat?
for when 1 pool dies and need to shif to another?

any example bat for say swap

coinotron to dwarfpool?

buny

full member

Activity: 237

Merit: 100

Quote from: manotroll on October 19, 2016, 07:28:48 PM

setx GPU_MAX_ALLOC_PERCENT 95
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer -G -S eth.pool.minergate.com:45791 -O you_email --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8192

?

dudee

member

Activity: 99

Merit: 10

made video of speed 6x RX470 on win10, driver 16.10.2 clock 1050/1900
conf --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8190
https://youtu.be/L-I_ZTUfXOk

nerdralph

sr. member

Activity: 588

Merit: 251

I just did a Linux build including a bug fix of the unauthorized worker disconnect.
https://github.com/nerdralph/ethminer-nr/tree/110/releases
grab version 1.2.0nr

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: jsanzsp on October 21, 2016, 02:12:33 PM

I have a 6 rx 470 rig, when I start Genoil, the text of the console is slow, very slow, someone knows how to fix it? always use claymore and run perfect

i have the same on celeron G1840 dualcore, it s very slow, use the hole 2 cpu (it hang also, unless i put the cpu miner to idle in task manager) than it s run bit faster but still very slow, it take between 5 and 12 minutes to create dag with 5 r9380
the page file is big

and other computer mono core athlon 2 160u with 6 r9380 and make the dag in less than 1 minute
have same memory & pagefiles

on the celeron version 1.1.9 does make the dag faster

LeChuckDE

sr. member

Activity: 420

Merit: 252

Quote from: jsanzsp on October 21, 2016, 02:12:33 PM

I have a 6 rx 470 rig, when I start Genoil, the text of the console is slow, very slow, someone knows how to fix it? always use claymore and run perfect

virtual memory must be set when you use multigpu (swap on linux, pagefile on windows)

jsanzsp

newbie

Activity: 72

Merit: 0

I have a 6 rx 470 rig, when I start Genoil, the text of the console is slow, very slow, someone knows how to fix it? always use claymore and run perfect

Cryptozillah

hero member

Activity: 687

Merit: 502

Quote from: manotroll on October 20, 2016, 03:21:31 PM

Quote from: Cryptozillah on October 20, 2016, 01:02:10 PM

Quote from: manotroll on October 19, 2016, 07:28:48 PM

setx GPU_MAX_ALLOC_PERCENT 95
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer -G -S eth.pool.minergate.com:45791 -O you_email --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8192

Thanks, will try it out

then tells you how much your RX480 render with this command

Will do.
I will mess around with the rigs tomorrow, i post some numbers here then

manotroll

sr. member

Activity: 305

Merit: 250

Quote from: Cryptozillah on October 20, 2016, 01:02:10 PM

Quote from: manotroll on October 19, 2016, 07:28:48 PM

setx GPU_MAX_ALLOC_PERCENT 95
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer -G -S eth.pool.minergate.com:45791 -O you_email --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8192

Thanks, will try it out

then tells you how much your RX480 render with this command

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: Cryptozillah on October 20, 2016, 01:02:10 PM

Quote from: manotroll on October 19, 2016, 07:28:48 PM

setx GPU_MAX_ALLOC_PERCENT 95
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer -G -S eth.pool.minergate.com:45791 -O you_email --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8192

Thanks, will try it out

Would be real interested in the results.

Cryptozillah

hero member

Activity: 687

Merit: 502

Quote from: manotroll on October 19, 2016, 07:28:48 PM

setx GPU_MAX_ALLOC_PERCENT 95
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer -G -S eth.pool.minergate.com:45791 -O you_email --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8192

Thanks, will try it out

manotroll

sr. member

Activity: 305

Merit: 250

setx GPU_MAX_ALLOC_PERCENT 95
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer -G -S eth.pool.minergate.com:45791 -O you_email --farm-recheck 200 -G --cl-local-work 256 --cl-global-work 8192

Cryptozillah

hero member

Activity: 687

Merit: 502

I am doing some tests with one of my RX480 8GB rigs.
I am 10Mhs slower with this miner then Claymores miner right now out of the box.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eu1.ethpool.org:3333 -FS us1.ethpool.org:3333 -O adress.miner

Anyone have a good bat file for RX480s laying around ?

Topic: ethminer-0.9.41-genoil-1.1 - page 14. (Read 397378 times)