Dear Dev. When your plans include a release EthControl with support for SGminer ? Thank you.
Hi,
I will take a look into it in few days.
Hi. Dear Developer. Please tell me, when You enable sgminer.
thanks
Topic: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS) - page 12. (Read 25547 times)
December 18, 2017, 04:03:40 AM
Hi,
I will take a look into it in few days.
Hi. Dear Developer. Please tell me, when You enable sgminer.
thanks
December 17, 2017, 11:58:16 PM
Good to see how far along you've progressed Nokia - great job here. Congrats
Thank you, i'l keep updating as i can
No worries - I used this when you first started out - it's is a huge difference now. Really like what you've done. Thank you for supporting and updating and your hard work.
December 17, 2017, 11:48:55 PM
Good to see how far along you've progressed Nokia - great job here. Congrats
Thank you, i'l keep updating as i can
December 17, 2017, 11:48:06 PM
Good to see how far along you've progressed Nokia - great job here. Congrats
December 17, 2017, 11:46:43 PM
Added new pools:
Code:
added GBX Altminer.net
added TZC altminer.net
added electroneum.fr
added electroneum.vip
added ETP + DCR / ETP + SC
added ETN - Miningpoolhub
December 16, 2017, 01:06:26 PM
Hi,
Seems to be active now.
Seems to be active now.
Thanks, still shows red via web interface. Will check on rig itself.
ok it picks up fan speeds and watt but not hashrate is reported so show as offline....any idea why that could be
ccminer.exe -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:17012 -u wizmanza.digger -p x --api-bind=127.0.0.1:4068 - this is my commandline
I see this ccminer is a fork from KlausT...does that not work with monitoring..?
Hi,
KlausT works with it, mby you have some other issue, can you come to discord for chat? https://discord.gg/xaSwKTt
December 14, 2017, 09:29:00 AM
Hi,
Seems to be active now.
Seems to be active now.
Thanks, still shows red via web interface. Will check on rig itself.
ok it picks up fan speeds and watt but not hashrate is reported so show as offline....any idea why that could be
ccminer.exe -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:17012 -u wizmanza.digger -p x --api-bind=127.0.0.1:4068 - this is my commandline
I see this ccminer is a fork from KlausT...does that not work with monitoring..?
December 14, 2017, 09:25:23 AM
Hi,
Seems to be active now.
Seems to be active now.
December 14, 2017, 09:17:27 AM
hi, is it $2 per each miner software on a RIG that i use?
or $2 for the RIG? as only one at a time can run
or $2 for the RIG? as only one at a time can run
Hi,
2$ per slot basically, if you run two instances like 8+8 GPU-s amd/nvidia different software same rig, then it takes 2 slots to monitor their data.
Hi i have made my payment and got confirmation from Coinpayments...please advise when it will be active as it shows offline on site
Thanks
Hi, send me your username to private message, i can activate faster it.
Hi i send you private message. Thanks
December 14, 2017, 08:40:10 AM
Like it and donated.
Any plans outlook to support additional miners, like CPUminer opt?
Any plans outlook to support additional miners, like CPUminer opt?
Hi yes, for cpu miners there's coming some other packages extra.
December 14, 2017, 08:31:50 AM
Like it and donated.
Any plans outlook to support additional miners, like CPUminer opt?
Any plans outlook to support additional miners, like CPUminer opt?
December 14, 2017, 08:25:17 AM
hi, is it $2 per each miner software on a RIG that i use?
or $2 for the RIG? as only one at a time can run
or $2 for the RIG? as only one at a time can run
Hi,
2$ per slot basically, if you run two instances like 8+8 GPU-s amd/nvidia different software same rig, then it takes 2 slots to monitor their data.
Hi i have made my payment and got confirmation from Coinpayments...please advise when it will be active as it shows offline on site
Thanks
Hi, send me your username to private message, i can activate faster it.
December 14, 2017, 08:22:39 AM
hi, is it $2 per each miner software on a RIG that i use?
or $2 for the RIG? as only one at a time can run
or $2 for the RIG? as only one at a time can run
Hi,
2$ per slot basically, if you run two instances like 8+8 GPU-s amd/nvidia different software same rig, then it takes 2 slots to monitor their data.
Hi i have made my payment and got confirmation from Coinpayments...please advise when it will be active as it shows offline on site
Thanks
December 14, 2017, 08:13:37 AM
Thanks, bit diff then if you use multiminer which chooses what miner to use . Only runs 1 at a time
December 14, 2017, 07:56:42 AM
hi, is it $2 per each miner software on a RIG that i use?
or $2 for the RIG? as only one at a time can run
or $2 for the RIG? as only one at a time can run
Hi,
2$ per slot basically, if you run two instances like 8+8 GPU-s amd/nvidia different software same rig, then it takes 2 slots to monitor their data.
December 14, 2017, 07:53:07 AM
hi, is it $2 per each miner software on a RIG that i use?
or $2 for the RIG? as only one at a time can run
or $2 for the RIG? as only one at a time can run
December 14, 2017, 12:24:56 AM
Well done, 
thanks !!
thanks !!I'm sure you already know this but since email notifications are now available you can get them sent as a text message to your cell phone using small gateway.
December 12, 2017, 08:22:45 AM
Well done, thanks !!
thanks !! December 12, 2017, 08:20:08 AM
OK but it's easier for users to have list of notifications rather than to wait for the condition to receive the notification.
For example, I have to wait for my miner get offline for more than x minutes to get the notification.
Or does the text sent is what you display in the combo box :
For example, I have to wait for my miner get offline for more than x minutes to get the notification.
Or does the text sent is what you display in the combo box :
Hi,
Messages:
Code:
1) Minername Offline more than X minutes!
2) Minername GPU temp too high: 56.0C/50C for GPU0
3) Minername GPU temp too low: 25C/50C for GPU0
4) Minername Fan speed too high for GPU0 Value: X%
5) Minername Fan speed too low for GPU0 Value: X%
6) Minername Hashrate below X for GPU0
7) Minername total hashrate below X
8) Minername is back online
// I will add these also soon
9) Minername total hashrate is too high X
10) Minername hashrate for GPU0 is too high GOT/LIMIT
11) Minername has lost a GPU current/total
2) Minername GPU temp too high: 56.0C/50C for GPU0
3) Minername GPU temp too low: 25C/50C for GPU0
4) Minername Fan speed too high for GPU0 Value: X%
5) Minername Fan speed too low for GPU0 Value: X%
6) Minername Hashrate below X for GPU0
7) Minername total hashrate below X
8) Minername is back online
// I will add these also soon
9) Minername total hashrate is too high X
10) Minername hashrate for GPU0 is too high GOT/LIMIT
11) Minername has lost a GPU current/total
December 12, 2017, 08:10:37 AM
OK but it's easier for users to have list of notifications rather than to wait for the condition to receive the notification.
For example, I have to wait for my miner get offline for more than x minutes to get the notification.
Or does the text sent is what you display in the combo box :
https://i.imgur.com/5Mdp4tB.png
For example, I have to wait for my miner get offline for more than x minutes to get the notification.
Or does the text sent is what you display in the combo box :
https://i.imgur.com/5Mdp4tB.png
Jump to: