Topic: ethOS - Ethereum Mining Platform - page 13. (Read 94540 times)
Anybody knows if Nicehash Cryptonight is possible with Nvidia on Ethos?
Ehy ETHOS team,
any new Release in the pipline?
possible to add this miner on the next release: dstm
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765
Thank you in advance
any new Release in the pipline?
possible to add this miner on the next release: dstm
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765
Thank you in advance
Support amd mining driver please
http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx
http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx
when will be increased the 16 gpu limit? right now the asus b250 motherboard is working only with 16 from 19 gpu
Hello,
I am looking to switch from Win10 to Ethos.
Just wondering how to set core/mem voltage ?
I saw 2 parameters :
What is powertune and how can I know what value to put in ? (I have Sapphire RX580 Nitro+ 8GB GPU's)
Vlt is the same that in MSI Afterburner ?
Thx
I am looking to switch from Win10 to Ethos.
Just wondering how to set core/mem voltage ?
I saw 2 parameters :
Quote
pwr [worker]: set the powertune of individual GPUs on a single rig
vlt [worker]: set the voltage of individual GPUs on a single rig, in millivolts (mv) i.e. 1080mv = 1.08v
vlt [worker]: set the voltage of individual GPUs on a single rig, in millivolts (mv) i.e. 1080mv = 1.08v
What is powertune and how can I know what value to put in ? (I have Sapphire RX580 Nitro+ 8GB GPU's)
Vlt is the same that in MSI Afterburner ?
Thx
you can set mem core clocks globally or manual set for each rig.
for each rig,
cor RIGID 1250 1250 1250 1250 1250 1250 // (x times for each gpu)
mem RIGID 4650 4650 4650 4650 4650 4650
or global for all rigs
globalcore 1000
globalmem 1250
sample config:
http://ethosdistro.com/pool.txt
Hello,
I am looking to switch from Win10 to Ethos.
Just wondering how to set core/mem voltage ?
I saw 2 parameters :
What is powertune and how can I know what value to put in ? (I have Sapphire RX580 Nitro+ 8GB GPU's)
Vlt is the same that in MSI Afterburner ?
Thx
I am looking to switch from Win10 to Ethos.
Just wondering how to set core/mem voltage ?
I saw 2 parameters :
Quote
pwr [worker]: set the powertune of individual GPUs on a single rig
vlt [worker]: set the voltage of individual GPUs on a single rig, in millivolts (mv) i.e. 1080mv = 1.08v
vlt [worker]: set the voltage of individual GPUs on a single rig, in millivolts (mv) i.e. 1080mv = 1.08v
What is powertune and how can I know what value to put in ? (I have Sapphire RX580 Nitro+ 8GB GPU's)
Vlt is the same that in MSI Afterburner ?
Thx
Hi,
We've just updated graphics cards to Radeon RX Vega64 8G HBM2 and I use ethos on PCs when they're not in use during the day. Ethos doesn't recognise this card - does anyone have any hints/tips?
Thanks,
Adyb
We've just updated graphics cards to Radeon RX Vega64 8G HBM2 and I use ethos on PCs when they're not in use during the day. Ethos doesn't recognise this card - does anyone have any hints/tips?
Thanks,
Adyb
EthOS does not support AMD Vega at this point of time (due to the lack of decent Linux drivers for these cards right now).
Hello guys stopped running the miner (sgminer) writes "to many autoreboots" in local.conf the auto-reload is not registered, how am I supposed to win?
autoreboot 3
in local.conf
Hi,
We've just updated graphics cards to Radeon RX Vega64 8G HBM2 and I use ethos on PCs when they're not in use during the day. Ethos doesn't recognise this card - does anyone have any hints/tips?
Thanks,
Adyb
We've just updated graphics cards to Radeon RX Vega64 8G HBM2 and I use ethos on PCs when they're not in use during the day. Ethos doesn't recognise this card - does anyone have any hints/tips?
Thanks,
Adyb
Anyone got sgminer-gm working???
I work on the mining of monero
sgminer-gm-xmr
very good OS but no lets you add your own miner. For example to do with mining the claymore cryptonight v10 must wait for the next update.
Does anybody have used ethOS? Is it good ?
very easy to use. It will save you a lot of time
It is NOT that easy to start with. But the FAQ is awesome. Everything could be accomplished by reading and understating it.
Anyone got sgminer-gm working???
Is there a way to set the core clock in nvidia-smi? I now use globalcore 1556 in local.conf but it's doing nothing with my MSI GeForce GTX Gaming 1060 X 3G cards.
I like ethOS very much, but unfortunately the power usage of my ethOS rigs is 75 watt higher compared to my similar nvOC rigs.
I tried do to some changes in custom.sh but it's still not working. The core clock stays about 1750 MHz which results in this higher usage.
Why is this code not working? Do I need to change more?
[EDIT] I think I fixed this problem for the biggest part by myself. The globalpowertune was set to 72 because of the 60% of TDP 120W. But it seems like the MSI GeForce GTX Gaming 1060 X 3G has a minimum of 100W. So now I use globalpowertune 100 and the power usage from the wall is about 690W at this moment.
Still not perfect but acceptable. I'd like to experiment a little more with the core clock to get this at 675W. In nvOS I'm able to set the core with nvidia-smi to -800 but in ethOS it's only working till -200
Is there a way to overrule this setting?
I like ethOS very much, but unfortunately the power usage of my ethOS rigs is 75 watt higher compared to my similar nvOC rigs.
I tried do to some changes in custom.sh but it's still not working. The core clock stays about 1750 MHz which results in this higher usage.
Code:
nvidia-settings -c :0 -a '[gpu:0]/GPUMemoryTransferRateOffset[3]=1500'
nvidia-settings -c :0 -a '[gpu:0]/GPUGraphicsClockOffset[3]=-800'
Why is this code not working? Do I need to change more?
[EDIT] I think I fixed this problem for the biggest part by myself. The globalpowertune was set to 72 because of the 60% of TDP 120W. But it seems like the MSI GeForce GTX Gaming 1060 X 3G has a minimum of 100W. So now I use globalpowertune 100 and the power usage from the wall is about 690W at this moment.
Still not perfect but acceptable. I'd like to experiment a little more with the core clock to get this at 675W. In nvOS I'm able to set the core with nvidia-smi to -800 but in ethOS it's only working till -200
Is there a way to overrule this setting?There is no need to set the clock speeds directly like this, just specify your configuration settings correctly within your configuration file and it will work fine..
BBT did a review on the Manli nVidia P106-090 3GB mining cards. In the live stream he did, he could only get the cards working with the Windows driver and overclocking tool downloaded from Manli website.
https://www.youtube.com/watch?v=TzuSwO6I_oA&feature=youtu.be&t=61
None of the Linux based OS detected the cards. Including ethOS, smOS and PIMP.
https://www.youtube.com/watch?v=TzuSwO6I_oA&feature=youtu.be&t=61
None of the Linux based OS detected the cards. Including ethOS, smOS and PIMP.
Well, I know for a fact their P106-100 6G GPU's work fine under EthOS. The should work P106-090's fine as well.
is ethos limited to 16 gpu?
At this point of time, yes.
I would like to know if anybody is mining with GPU from Pradeon (http://www.pradeon.com/ both AMD and Nvidia GPU) or Manli (http://www.manli.com/en/products/Mining_Series/Mining_Cards/products/111) on EthOS ? If yes are these GPU stable with these OS or is it more stable on Win10 pro ?
Thanks for your feedbacks !
Thanks for your feedbacks !
Yes, the Manli GPU's are stable under EthOS.
Hi everybody,
I’m brand new in mining stuff.
I'm running ethOS with nvidia gtx 1080 ti cards. Easy to use with standard configuration
but can someone suggest me a good OC configuration?
What should I put for the globalcore, globalmem and globalpowertune parameters?
Thank you in advance
I’m brand new in mining stuff.
I'm running ethOS with nvidia gtx 1080 ti cards. Easy to use with standard configuration
but can someone suggest me a good OC configuration?
What should I put for the globalcore, globalmem and globalpowertune parameters?
Thank you in advance
This is for 1060:
maxgputemp 85
globalfan 75
globalmem 4700
globalpowertune 81
Does anybody have used ethOS? Is it good ?
very easy to use. It will save you a lot of time
is ethos limited to 16 gpu?
Jump to: