Topic: EUROPECOIN [ERC] 🌟 FINANCECLOUD 🌟 CRYPTOCURRENY & FINANCE API + SMARTHUB 🌟 - page 178. (Read 543135 times)

Reporting back now (after 13 hours) running still stuck on 902273.

It connects for a moment (showing 1 connection) and then immediately goes offl.

I`m stuck on block 902621 with this Matthias steps.

Hi Matthias,

I i'll try the above steps.

You mention its normal that  3 hours stopping for our chain (history) might occur.

Currently is has stopped at 902273. I leave it on and report back after 12 hours or so.

Jerry

O.K. everybody who used THIS this upgrade process succeeded
please try again following this guidelines AND please don't wast you time reloading the chain,
it simply has to work without resync, if it does not, it my turn again to investigate.
Please be aware that a up to three hours of stopping are normal (for a chain with our history)

But anyway i am optimistic this time:


1) delete europecoin.config and peers.dat
2)the new europecoin conf looks like that:


3) please no additional noded or i.p.s
reason: Marcetin from Bitnodes is somehow out of reach (unusual from him, lets hope, he is O.K.) and his nodes are  not upgaded and also forked.
with my provided conf we manage to first get a Networkwide equal chain and the we will switch back to the classical approach.

here is a working explorer:  http://stratum.infernopool.com:3004/

and here is the right repo:
https://github.com/EuropecoinEUORG/EuropecoinV2

here trhe windows wallet:
http://www.europecoin.eu.org/europecoin-wallet-download/category/1-europecoin-wallet?download=30:v2-0-windows-noinstall-28-01-2016


have fun
Matthias

Stuck at 850,241

nope, mine still stuck at 902229

It's running an hour now and nearly 6%. So i have to be patient just like you.

Yeah, me too. But i got only 30% in 12 hours.

Tried a few times with new wallet version and the dat file. But syncing didn't work.

So cleared up everything and rebuild the chain from scratch. Probably take a day or so to sync. Hope it helps.

My box is finally fully synced and waiting for connections
People, update your clients, it's not rocket science! I see a lot of "using obsolete version 60014; disconnecting" in my debug.log!

Jep agree i will give it a review tomorrow and update everything, same for our website.
Given· that i still meet people who are around Europecoin all the time, but didn't know about the relaunch, the cause and so on,
proves, there i still plenty of space for getting better.

thanks for helping
Matthias


.

Try this europecoin.conf:

So whats nodes is up to date? im only using connect= to main nodes on first page just to be sure im using relaiabile source and dont end up on wrong  ones, but since all of them are on old wallet, what offcial nodes is on the right chain ? update first page please! and even thou the links isnt outdated per see, the info is! and thats whats causing problems and misunderstanding. ( kinda hope you know that already and just wanted to play " answer marked words only" )   

Let`s get back to the game, show me the money Jerry

BABIIIIIIE thats what i hoped to read this morning,
AND i love the new performance, infernos last cleanup made it lightening fast and responsive.
I am beginning to  love this wallet again ....


have fun
Matthias



.

Yes my wallet is syncing slowly but now i have 3 connection.

We are moving again http://stratum.infernopool.com:3004/

With the drop in replacement you SHOULDNT need to sync at all. But sometimes it doesnt always work definitely worth a shot though before checking out the bootstrap. since the bootstrap will still take a while to sync all of the blocks

ROKOS v5 Flavors Released!

Support thread: ROKOS Flavors

Visit the New ROKOS website at: http://rokos.space


ROKOS v5 "Flavors" Released. Full OS with Cryptocurrency Clients, full nodes and much more. Faster, Easier, Stronger.



We've seen new services selling "stake miners" for different currencies, we support the new technology and uses for cryptocurrencies in the Raspberry Pi environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with BTC, OK and more cryptocurrencies, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin + 11 Cryptocurrencies Clients and nodes as well to provide the users with the best and easier Out of the Box experience.


The First OS image release that merges the full power of Raspberry Pi 2, Banana Pi PRO & IoT Devices with Bitcoin and Cryptocurrencies:
- ROKOS v5 "Flavors" comes with integrated Cryptocurrencies Clients / nodes .


Specs:

v5 "flavors" Release (Pi2) March 07 2016
- Full burnable OS Compatible with the Raspberry Pi systems.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Iceweasel browser.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Updated Out of the box Firewall ready for use (gui) (start in terminal: gufw)
- Includes Qt and complete set of Dev tools (For developers)
- Includes Qt 3.2.1 Native / Qt 5.5.1 for Cross compile !
- Works with other cryptocurrencies.
- 1024mb swap mod.
- Updated Cryptocurrencies Included:
Bitcoin, OKCash, Blackcoin, Gamecredits, Digitalcoin, Diamondcoin,
Energycoin, Europecoin, Soil, Metalcoin, Transfercoin, Mojocoin. (Readme.txt)
- Custom Login and Wallpapers.
- Cryptocurrencies nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Direct access to the Clients Via: Task bar and Menu > Internet.
- ZIP file - Compression: 2.2Gb image to download, 6.1GB uncompressed to burn.


Requirements:
ROKOS v5 "flavors":
- Raspberry Pi 2 (Pi2 full power use by debian jessie base)

- Min 8gb SD card and an External device (usb / hdd / ssd). To sync the Cryptocurrencies chains on the external device instead of the SD card.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies will be integrated for an Out of the Box experience and adoption.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.






*Raspberry Pi 2:
User: pi / Password: raspberry , follow normal setup.

a) Type: sudo raspi-config
b) Set your Time Zone, change your pi user password and Expand the file system, restart.
After restart the system you can type:  "startx"   to start the user desktop.
c) System ready for use.



a) Go to Menu > Internet and Click on your favorite Cryptocurrency Wallet

This will open the Cryptocurrency wallet and start sync.

*For some Cryptocurrencies the initial sync might take some days, wallets are fully usable after being fully Synchronized.



b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your wallets in ROKOS to plug HW and mine, Send/Receive, Stake, Share,
become a full node and support your favorite Cryptocurrency network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Raspberry Pi Hardware, Raspbian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, I do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chains.


You can start testing and developing new integration with ROKOS and your favorite cryptocurrencies for your IoT projects.







(I did this on a Windows computer, and I dont know what tool to use for Mac to install the iso file Image burner, for this guide you will have to figure out that yourself, if you use Mac)

1. Download and install SD Formatter 4.0 (This is the tool to format the SD card) from:
Windows: https://www.sdcard.org/downloads/formatter_4/eula_windows/SDFormatterv4.zip
Mac: https://www.sdcard.org/downloads/formatter_4/eula_mac/SDFormatter_4.00B.pkg
(or find it yourself at: https://sdcard.org/downloads)

2. Insert the MicroSD/MicroSDHC card into your PC/Mac. (You will probably need an MicroSD to SD adapter for this).

3. Start SD Formatter 4.0 and click the [Option] button. In there you change from "FORMAT TYPE: QUICK" to "FORMAT TYPE: (FULL)Erase", just leave the "FORMAT SIZE ADJUSTMENT" in OFF and click the [OK] button so start the format. When the card is completely formatted click the [Exit] button to close SD Formatter.

4. Download and install Win32 Disk Imager (This is the iso file Image burner) from:
Windows: http://sourceforge.net/projects/win32diskimager/files/latest/download

5. Download ROKOS Core (rokos5.img.zip) and unzip the ISO file (This is the awesome ROKOS Core "Operating System" that we are going to install on the SD card) from:
Download: http://bit.ly/rokos5flavors
(or find it yourself at: http://rokos.space

6. Start Win32 Disk Imager, press the "little blue folder" and select the "rokos5.img" file that you did extract. Make sure your SD card is selected in the list to the right and press the [Write] button. It will tell you that it can corrupt the SD card, just press [Yes] to continue the installation, when the installation to the SD card is done press the [Exit] button to close Win32 Disk Imager.

7. Now "Safely remove" your SD card from the computer.

8. Put the MicroSD/MicroSDHC card in your Raspberry Pi 2, and make sure you got an USB Keyboard, Monitor (via HDMI), and and Internet cable connected to the Raspberry Pi 2 before you connect the power cable to your Raspberry Pi 2.




1. Type:
(and press enter)

2. Select:
(and press enter) press enter again on the button.

3. Select:

Code:

2. Change user password

(and press enter) press enter again on the button. Type a new password (you will not see the letters) and press enter, type your new password again, and press enter. Then press the button.

4. Select:

Code:

5. Internationalization Options

(and press enter) Then select:

Code:

I2. Change Timezone

(Choose your timezone)

5. Press the "TAB" button on your keyboard two times to get to the button, and press enter. Then choose to restart your system.

6. Type:

Code:

startx

(and press enter) your system will now start up and you are DONE!

ENJOY THIS AWESOME OPERATING SYSTEM!