EWBF's CUDA Zcash miner - page 212. | Bitcointalksearch.org

Streetlight9

newbie

Activity: 38

Merit: 0

Quote from: m1n1ngP4d4w4n on February 03, 2017, 10:54:06 AM

Quote from: Streetlight9 on February 03, 2017, 10:51:45 AM

My set of 1060 3GB...

Am sure I can lower the Memory for the same speed. need to try it tho...

pretty nice numbers, you at about 600w on wall ?

560w from the wall.

http://i608.photobucket.com/albums/tt167/TheFlame1/20170203_155636_zpswfpu701a.jpg

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: Streetlight9 on February 03, 2017, 10:51:45 AM

My set of 1060 3GB...

Am sure I can lower the Memory for the same speed. need to try it tho...

pretty nice numbers, you are at about 600w on wall ?

Streetlight9

newbie

Activity: 38

Merit: 0

My set of 1060 3GB...

http://i608.photobucket.com/albums/tt167/TheFlame1/2017-02-03_15-48_zpswivomzcp.jpg

Am sure I can lower the Memory for the same speed. need to try it tho...

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: Dr_Victor on February 03, 2017, 08:59:02 AM

Quote from: m1n1ngP4d4w4n on February 03, 2017, 04:24:55 AM

Equihash is more GPU core intensive, you should run OC@150-595, for me @ 60% tdp (110w per card / 825w @ wall) i get ~2640 sols/s with 6x gtx 1070 rigs

You are talking about memory speed?

No i said GPU core, so talking about the processor (gpu) of your graphic card, not the memory. Equihash is much less memory intensive than gpu intensive, hence why boosting overlock of the gpu give you better result.

sublimus

full member

Activity: 240

Merit: 100

Quote from: Kompik on February 03, 2017, 05:48:32 AM

Is it a good idea to keep the fans on auto?

http://imgur.com/a/R7ieb

It's a bad idea if you do not tweak the fan curve.

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: m1n1ngP4d4w4n on February 03, 2017, 04:24:55 AM

Equihash is more GPU core intensive, you should run OC@150-595, for me @ 60% tdp (110w per card / 825w @ wall) i get ~2640 sols/s with 6x gtx 1070 rigs

You are talking about memory speed?

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: Kompik on February 03, 2017, 05:48:32 AM

Is it a good idea to keep the fans on auto?

I prefer to set them on a fixed % because they'll wear a little less overtime, but it's a danger if your environment isn't properly controlled to have overheat.

Kompik

sr. member

Activity: 463

Merit: 250

Is it a good idea to keep the fans on auto?

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Equihash is more GPU core intensive, you should run OC@150-595, for me @ 60% tdp (110w per card / 825w @ wall) i get ~2640 sols/s with 6x gtx 1070 rigs

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: e9ez9ert on February 02, 2017, 07:26:53 PM

6x GTX 1070
only 860w at the wall and ~2530-2600 sol/s

There is no reason to increase GPU speed with TDP limit - we get the same.

red_x

newbie

Activity: 14

Merit: 0

Quote from: taylub on February 02, 2017, 06:50:36 PM

Quote from: ?? on ??

Quote from: Kompik on February 02, 2017, 05:23:18 PM

Quote from: red_x on February 02, 2017, 04:39:04 PM

Hi! Just got a Gigabyte 1060 6GB Gaming a few days ago, miner works fine

Maybe I've been away from Nvidia too much time but I can't figure out why boost clock won't jump to full when I start the miner, it jumps only to 1595 Mhz, mining only 265 sol, but if I start a web browser like Firefox it will jump to 2114, mining at 308-315 sol depending on memory oc

Is it a driver issue? I'm using the latest one

https://i.imgur.com/BCr9ooa.jpg

That is because some program is blocking it. Try to shut down everything ( even from your tray) and it will go back up. For me this happens when i have crhome on, or GOG console for example.

Yeah, usually this happens to my when I have chrome open.

open the nvidia control panel and in the "manage 3D settings", change power management mode to maximum performance (adaptive should work too). The default is power saving for some reason.

thank you that did the trick

e9ez9ert

newbie

Activity: 4

Merit: 0

http://up.picr.de/28205063cr.jpg

6x GTX 1070
only 860w at the wall and ~2530-2600 sol/s

http://up.picr.de/28205059hh.jpg

6x RX480
900w at the wall and ~1500 sol/s

taylub

newbie

Activity: 19

Merit: 0

Quote from: ?? on ??

Quote from: Kompik on February 02, 2017, 05:23:18 PM

Quote from: red_x on February 02, 2017, 04:39:04 PM

Hi! Just got a Gigabyte 1060 6GB Gaming a few days ago, miner works fine

Maybe I've been away from Nvidia too much time but I can't figure out why boost clock won't jump to full when I start the miner, it jumps only to 1595 Mhz, mining only 265 sol, but if I start a web browser like Firefox it will jump to 2114, mining at 308-315 sol depending on memory oc

Is it a driver issue? I'm using the latest one

https://i.imgur.com/BCr9ooa.jpg

That is because some program is blocking it. Try to shut down everything ( even from your tray) and it will go back up. For me this happens when i have crhome on, or GOG console for example.

Yeah, usually this happens to my when I have chrome open.

open the nvidia control panel and in the "manage 3D settings", change power management mode to maximum performance (adaptive should work too). The default is power saving for some reason.

Kompik

sr. member

Activity: 463

Merit: 250

Quote from: red_x on February 02, 2017, 04:39:04 PM

Hi! Just got a Gigabyte 1060 6GB Gaming a few days ago, miner works fine

Maybe I've been away from Nvidia too much time but I can't figure out why boost clock won't jump to full when I start the miner, it jumps only to 1595 Mhz, mining only 265 sol, but if I start a web browser like Firefox it will jump to 2114, mining at 308-315 sol depending on memory oc

Is it a driver issue? I'm using the latest one

That is because some program is blocking it. Try to shut down everything ( even from your tray) and it will go back up. For me this happens when i have crhome on, or GOG console for example.

induktor

hero member

Activity: 710

Merit: 502

Hello
Any ideas why i cannot connect to suprnova.cc with this miner?

mining LBRY with ccminer on suprnova (same rig) is fine, but this miner wont connect.

miner --server zec-us.suprnova.cc --port 2142

zec.suprnova.cc also doesn't work.

doesn't connect Sad

is suprnova supported?
thanks
indkt

red_x

newbie

Activity: 14

Merit: 0

Hi! Just got a Gigabyte 1060 6GB Gaming a few days ago, miner works fine

Maybe I've been away from Nvidia too much time but I can't figure out why boost clock won't jump to full when I start the miner, it jumps only to 1595 Mhz, mining only 265 sol, but if I start a web browser like Firefox it will jump to 2114, mining at 308-315 sol depending on memory oc

Is it a driver issue? I'm using the latest one

https://i.imgur.com/BCr9ooa.jpg

bughatti

full member

Activity: 154

Merit: 100

Quote from: TeamGreen on February 02, 2017, 12:02:45 AM

Quote from: bughatti on February 01, 2017, 11:50:11 PM

Quote from: TeamGreen on February 01, 2017, 11:01:43 PM

Can't do 7x 8gb nvidia cards on msi z97 - memory address / allocation issue that I think is hard coded to mobo. I went deep down that rabbit hole messing with IRQ settings, memory addresses and a bunch of other stuff before figuring this out. You can run 7x 4gb cards on that board - most people use 470s or 480s for this.

I have 7 3gb cards, 1060 but I only have a celeron 34$ proc in it

That should work just fine, with 3gb cards.

No it won't work, it's some thing different with nvidia, I get not enough resources, I must disable another if I want to use it.

Tomorrowman

member

Activity: 74

Merit: 10

Quote from: TeamGreen on February 01, 2017, 11:01:43 PM

Can't do 7x 8gb nvidia cards on msi z97 - memory address / allocation issue that I think is hard coded to mobo. I went deep down that rabbit hole messing with IRQ settings, memory addresses and a bunch of other stuff before figuring this out. You can run 7x 4gb cards on that board - most people use 470s or 480s for this.

I have 4 rigs with 7 x rx480 8g cards on msi z97 gaming 5 and they works fine, but in case with 1070 it's only 6 cards on this mobo ((

pintycar

newbie

Activity: 59

Merit: 0

Quote from: bughatti on February 01, 2017, 01:56:08 PM

Yea unfortunately its a no go for me to, tried everything I could think of, even took all out and installed 1 at a time, then reboot. Still did not work. I saw a thread by someone who had 7 working in windows but they had amd and are using 8.1 pro. I had a couple other computers in the house so I just threw the 7th in that one to mine. Really wish I could find someone that got 7 nvidia cards working in windows.

@pintycar, out of curiosity, have you tested pascalcoin on your rig yet, I tried sgminer pascal and it fails with 6 cards trying to use 2 threads each. I dont want to hyjack this thread so if you have it working, can you PM me your setup?

Hmmm that's a shame. Although it makes sense now that I've read TeamGreen's answers too. Meh, 6 is enough and they get more ventilation that way. Regarding PascalCoin, no I haven't tried it yet. If I do and get decent results I'll send you a PM.

TeamGreen

newbie

Activity: 51

Merit: 0

Quote from: bughatti on February 01, 2017, 11:50:11 PM

Quote from: TeamGreen on February 01, 2017, 11:01:43 PM

Can't do 7x 8gb nvidia cards on msi z97 - memory address / allocation issue that I think is hard coded to mobo. I went deep down that rabbit hole messing with IRQ settings, memory addresses and a bunch of other stuff before figuring this out. You can run 7x 4gb cards on that board - most people use 470s or 480s for this.

I have 7 3gb cards, 1060 but I only have a celeron 34$ proc in it

That should work just fine, with 3gb cards.

Topic: EWBF's CUDA Zcash miner - page 212. (Read 2164327 times)