excavator by NiceHash - multi-algorithm NVIDIA GPU miner [1.5.6a] - page 2.

MiningTaken

newbie

Activity: 28

Merit: 0

Quote from: dropky on June 07, 2018, 07:44:21 AM

Quote from: MiningTaken on June 07, 2018, 02:59:26 AM

@Dropky,
Thank you very much for your help.

I would like to confirm : for the BTC address, should I add ":x" behind my BTC address (like the one with Excavator 1.4.4a), or, no need to add those ":x" (just my BTC address) with v1.5.4a now ?

FYI, I did have 6 GPUs. I don't know why Awesome Miner made the config with 13 devices.

Should I edit it to only 6 devices, or, should I just leave it that way?

Please advise. Thanks.

There is no need to add :x behind your BTC address. Yes, I would advise you to edit your config file for 6 GPUs, but it should work either way, excavator is ignoring commands send for devices that do not exist.

Ok, got it. Thanks again for your help. Cheers!

dropky

jr. member

Activity: 132

Merit: 7

Quote from: MiningTaken on June 07, 2018, 02:59:26 AM

@Dropky,
Thank you very much for your help.

I would like to confirm : for the BTC address, should I add ":x" behind my BTC address (like the one with Excavator 1.4.4a), or, no need to add those ":x" (just my BTC address) with v1.5.4a now ?

FYI, I did have 6 GPUs. I don't know why Awesome Miner made the config with 13 devices.

Should I edit it to only 6 devices, or, should I just leave it that way?

Please advise. Thanks.

There is no need to add :x behind your BTC address. Yes, I would advise you to edit your config file for 6 GPUs, but it should work either way, excavator is ignoring commands send for devices that do not exist.

MiningTaken

newbie

Activity: 28

Merit: 0

Quote from: dropky on June 07, 2018, 02:25:36 AM

Ok, I see the problem, we modified excavator API with 1.5.x versions.

Try this (change btc address in subscribe method):

Quote

[
   {"time":1,"commands":[
{"id":1,"method":"subscribe","params":["nhmp.jp.nicehash.com:3200","BTC address"]}
]},
   {"time":2,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2rev2"]}
]},
{"time":3,"commands":[
   {"id":1,"method":"worker.add","params":["lyra2rev2", "0"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "1"]},
{"id":1,"method":"worker.add","params":["lyra2rev2", "2"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "3"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "4"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "5"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "6"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "7"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "8"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "9"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "10"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "11"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "12"]}
]},
   {"time":10,"loop":10,"commands":[
        {"id":1,"method":"worker.print.speeds","params":[]},
   {"id":1,"method":"algorithm.print.speeds","params":[]}
]}
]

FYI, you said you have 6 devices in the rig, the config file is made for 13 GPUs.

@Dropky,
Thank you very much for your help.

I would like to confirm : for the BTC address, should I add ":x" behind my BTC address (like the one with Excavator 1.4.4a), or, no need to add those ":x" (just my BTC address) with v1.5.4a now ?

FYI, I did have 6 GPUs. I don't know why Awesome Miner made the config with 13 devices.

Should I edit it to only 6 devices, or, should I just leave it that way?

Please advise. Thanks.

dropky

jr. member

Activity: 132

Merit: 7

Ok, I see the problem, we modified excavator API with 1.5.x versions.

Try this (change btc address in subscribe method):

Quote

[
   {"time":1,"commands":[
{"id":1,"method":"subscribe","params":["nhmp.jp.nicehash.com:3200","BTC address"]}
]},
   {"time":2,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2rev2"]}
]},
{"time":3,"commands":[
   {"id":1,"method":"worker.add","params":["lyra2rev2", "0"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "1"]},
{"id":1,"method":"worker.add","params":["lyra2rev2", "2"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "3"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "4"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "5"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "6"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "7"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "8"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "9"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "10"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "11"]},
   {"id":1,"method":"worker.add","params":["lyra2rev2", "12"]}
]},
   {"time":10,"loop":10,"commands":[
        {"id":1,"method":"worker.print.speeds","params":[]},
   {"id":1,"method":"algorithm.print.speeds","params":[]}
]}
]

FYI, you said you have 6 devices in the rig, the config file is made for 13 GPUs.

MiningTaken

newbie

Activity: 28

Merit: 0

Quote from: dropky on June 07, 2018, 01:26:30 AM

Quote from: MiningTaken on June 05, 2018, 01:51:03 PM

@Dropky or anyone,

I want to setup my Awesome Miner to use Excavator 1.5.4a mining Lyra2REv2 at Nicehash, but it doesn't work.
How should I setup it with AM? Should I setup the Json file ?
I have 6 of GTX 1070 TI.
Please help. Thanks.

I'm not familiar how Awesome Miner passes the commands to Excavator. Probably through the config file, can you post here the json file you mentioned?

@Dropky,

Here is the "awesome.json" file made by Awesome Miner in Excavator 1.5.4a folder (and it doesn't work):

[
    {"time":0,"commands":[
       {"id":1,"method":"algorithm.add","params":["lyra2rev2","lyra2rev2.jp.nicehash.com:3347","76FG5wMYLzy4KHrEsqCDBZ65KzuF8ambE:x"]}
    ]},
    {"time":3,"commands":[
       {"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]},
{"id":1,"method":"worker.add","params":["0","2"]},
{"id":1,"method":"worker.add","params":["0","3"]},
{"id":1,"method":"worker.add","params":["0","4"]},
{"id":1,"method":"worker.add","params":["0","5"]},
{"id":1,"method":"worker.add","params":["0","6"]},
{"id":1,"method":"worker.add","params":["0","7"]},
{"id":1,"method":"worker.add","params":["0","8"]},
{"id":1,"method":"worker.add","params":["0","9"]},
{"id":1,"method":"worker.add","params":["0","10"]},
{"id":1,"method":"worker.add","params":["0","11"]},
{"id":1,"method":"worker.add","params":["0","12"]}
    ]},
    {"time":10,"loop":10,"commands":[
       {"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"worker.print.speed","params":["1"]},
{"id":1,"method":"worker.print.speed","params":["2"]},
{"id":1,"method":"worker.print.speed","params":["3"]},
{"id":1,"method":"worker.print.speed","params":["4"]},
{"id":1,"method":"worker.print.speed","params":["5"]},
{"id":1,"method":"worker.print.speed","params":["6"]},
{"id":1,"method":"worker.print.speed","params":["7"]},
{"id":1,"method":"worker.print.speed","params":["8"]},
{"id":1,"method":"worker.print.speed","params":["9"]},
{"id":1,"method":"worker.print.speed","params":["10"]},
{"id":1,"method":"worker.print.speed","params":["11"]},
{"id":1,"method":"worker.print.speed","params":["12"]},
       {"id":1,"method":"algorithm.print.speeds","params":["0"]}
    ]}
   ]

--------------------------------------------------------------------------------------------------------------------------------------

And here is the "awesome.json" file made by Awesome Miner in Excavator 1.4.4a folder (and it works) :

[
    {"time":0,"commands":[
       {"id":1,"method":"algorithm.add","params":["lyra2rev2","lyra2rev2.jp.nicehash.com:3347","76FG5wMYLzy4KHrEsqCDBZ65KzuF8ambE:x"]}
    ]},
    {"time":3,"commands":[
       {"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]},
{"id":1,"method":"worker.add","params":["0","2"]},
{"id":1,"method":"worker.add","params":["0","3"]},
{"id":1,"method":"worker.add","params":["0","4"]},
{"id":1,"method":"worker.add","params":["0","5"]},
{"id":1,"method":"worker.add","params":["0","6"]},
{"id":1,"method":"worker.add","params":["0","7"]},
{"id":1,"method":"worker.add","params":["0","8"]},
{"id":1,"method":"worker.add","params":["0","9"]},
{"id":1,"method":"worker.add","params":["0","10"]},
{"id":1,"method":"worker.add","params":["0","11"]},
{"id":1,"method":"worker.add","params":["0","12"]}
    ]},
    {"time":10,"loop":10,"commands":[
       {"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"worker.print.speed","params":["1"]},
{"id":1,"method":"worker.print.speed","params":["2"]},
{"id":1,"method":"worker.print.speed","params":["3"]},
{"id":1,"method":"worker.print.speed","params":["4"]},
{"id":1,"method":"worker.print.speed","params":["5"]},
{"id":1,"method":"worker.print.speed","params":["6"]},
{"id":1,"method":"worker.print.speed","params":["7"]},
{"id":1,"method":"worker.print.speed","params":["8"]},
{"id":1,"method":"worker.print.speed","params":["9"]},
{"id":1,"method":"worker.print.speed","params":["10"]},
{"id":1,"method":"worker.print.speed","params":["11"]},
{"id":1,"method":"worker.print.speed","params":["12"]},
       {"id":1,"method":"algorithm.print.speeds","params":["0"]}
    ]}
   ]

Please help. Thanks a lot.

dropky

jr. member

Activity: 132

Merit: 7

Quote from: MiningTaken on June 05, 2018, 01:51:03 PM

@Dropky or anyone,

I want to setup my Awesome Miner to use Excavator 1.5.4a mining Lyra2REv2 at Nicehash, but it doesn't work.
How should I setup it with AM? Should I setup the Json file ?
I have 6 of GTX 1070 TI.
Please help. Thanks.

I'm not familiar how Awesome Miner passes the commands to Excavator. Probably through the config file, can you post here the json file you mentioned?

MiningTaken

newbie

Activity: 28

Merit: 0

@Dropky or anyone,

I want to setup my Awesome Miner to use Excavator 1.5.4a mining Lyra2REv2 at Nicehash, but it doesn't work.
How should I setup it with AM? Should I setup the Json file ?
I have 6 of GTX 1070 TI.
Please help. Thanks.

dropky

jr. member

Activity: 132

Merit: 7

@pupkinv From version 1.5.0 excavator supports only NiceHash stratums.

pupkinv

newbie

Activity: 11

Merit: 0

Quote

We made some changes to the API in 1.5.x versions.

Replace worker.add with:

Code:

{"id":1,"method":"worker.add","params":["lyra2z","0"]}

From now on algorithm has to be assigned by name, not id.

Thanks!
If I want to try mining with excavator on non-nicehash pool how I can write config now?
like this:

Code:

[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2z","benchmark"]},
{"id":1,"method":"subscribe","params":["lyra2z-pool:9999", "some_wallet.worker:x"]}
]
},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["lyra2z","0"]}
]
},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":[]}
]
}
]

or it's work only for nicehash?

dropky

jr. member

Activity: 132

Merit: 7

Quote from: pupkinv on June 02, 2018, 04:47:08 PM

I'm try benchmark new lyra2z support.
lyra2z-bench.json

Code:

[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2z","benchmark"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":[]}
]}
]

Benchmart starting, but but speed is "0 H/s"
Console output:

Code:

excavator.exe -c lyra2z-bench.json -f 0 -fn logfile.txt

=========================== www.nicehash.com =========================
Excavator v1.5.4a_nvidia GPU Miner for NiceHash.
Copyright (C) 2018 NiceHash. All rights reserved.
=========================== www.nicehash.com =========================

Build time: 2018-05-30 12:41:07
Build number: 5688
Provided startup commandline:
excavator.exe -c lyra2z-bench.json -f 0 -fn logfile.txt

[00:30:46][0x0000012c][info] Log started
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] api | Listening on 127.0.0.1:3456
[00:30:47][0x0000012c][info] core | Initialized!
[00:30:47][0x00000b8c][info] net | lyra2z | New job 'benchmarkjob', diff=1
[00:30:57][0x00000b8c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:07][0x0000012c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:17][0x00000b8c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:27][0x0000012c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:29][0x0000012c][info] Shutting down
[00:31:29][0x0000012c][info] api | Closing

Log file here https://dropmefiles.com/AQKx1
Could you help?

We made some changes to the API in 1.5.x versions.

Replace worker.add with:

Code:

{"id":1,"method":"worker.add","params":["lyra2z","0"]}

From now on algorithm has to be assigned by name, not id.

pupkinv

newbie

Activity: 11

Merit: 0

I'm try benchmark new lyra2z support.
lyra2z-bench.json

Code:

[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2z","benchmark"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":[]}
]}
]

Benchmart starting, but but speed is "0 H/s"
Console output:

Code:

excavator.exe -c lyra2z-bench.json -f 0 -fn logfile.txt

=========================== www.nicehash.com =========================
Excavator v1.5.4a_nvidia GPU Miner for NiceHash.
Copyright (C) 2018 NiceHash. All rights reserved.
=========================== www.nicehash.com =========================

Build time: 2018-05-30 12:41:07
Build number: 5688
Provided startup commandline:
excavator.exe -c lyra2z-bench.json -f 0 -fn logfile.txt

[00:30:46][0x0000012c][info] Log started
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] core | Found CUDA device: GeForce GTX 1080 Ti
[00:30:47][0x0000012c][info] api | Listening on 127.0.0.1:3456
[00:30:47][0x0000012c][info] core | Initialized!
[00:30:47][0x00000b8c][info] net | lyra2z | New job 'benchmarkjob', diff=1
[00:30:57][0x00000b8c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:07][0x0000012c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:17][0x00000b8c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:27][0x0000012c][info] core | Algorithm 'lyra2z' speed: 0.000000 H/s
[00:31:29][0x0000012c][info] Shutting down
[00:31:29][0x0000012c][info] api | Closing

Log file here https://dropmefiles.com/AQKx1
Could you help?

sir_blacks

jr. member

Activity: 119

Merit: 3

Quote from: dropky on March 27, 2018, 04:53:18 AM

From version 1.5.0a further excavator supports only NiceHash stratum servers. Stratum servers are available at:
nhmp.LOCATION.nicehash.com (LOCATION: eu, usa, hk, jp, in, br).

sad day when excavator was bound only to nicehash server, anyway gl with developement

dropky

jr. member

Activity: 132

Merit: 7

We released a new version of excavator:
https://github.com/nicehash/excavator/releases/tag/v1.5.4a

- added lyra2z
- fixed lyra2rev2 bug that was causing lower pool speed on some pools
- added state.set method to API: https://github.com/nicehash/excavator/tree/master/api#state-set

The purpose of state.set method is easier handling with excavator between switching. See example:
https://github.com/nicehash/excavator/blob/master/command_file_switching_example.json

dimytr

newbie

Activity: 33

Merit: 0

@dropky @EvgeniyKorepov
Thanks to both of you!

EvgeniyKorepov

newbie

Activity: 42

Merit: 0

Quote from: dropky on May 15, 2018, 01:19:08 AM

Quote from: EvgeniyKorepov on May 15, 2018, 12:47:46 AM

SKIP
Or you can try my application. It will help you much more than this JSON :
https://github.com/EvgeniyKorepov/MinerPro-for-NiceHash

@EvgeniyKorepov This json file is incorrect. You forgot the algorithm.add method, the first parameter in worker.add has to be the name of the algorithm, also M=0 is not the fastest option for equihash. If you're using M=0 parameter you should definitely use two workers per device to get better results. FYI, we added worker.print.speeds method, you might find it useful Wink

@dimytr Here is the correct example (without overclocking):

Quote

[
   {"time":0,"commands":[
      {"id":1,"method":"subscribe","params":["nhmp.eu.nicehash.com:3200","btc_address.worker_name"]}
   ]},
   {"time":2,"commands":[
   {"id":1,"method":"algorithm.add","params":["equihash"]}
   ]},
   {"time":3,"commands":[
       {"id":1,"method":"worker.add","params":["equihash","0"]},
   {"id":1,"method":"worker.add","params":["equihash","1"]},
   {"id":1,"method":"worker.add","params":["equihash","2"]},
   {"id":1,"method":"worker.add","params":["equihash","3"]},
   {"id":1,"method":"worker.add","params":["equihash","4"]},
   {"id":1,"method":"worker.add","params":["equihash","5"]}
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"algorithm.print.speeds","params":[]}
   ]}
]

Fixed, thanks! I'm just confused in the versions of API and copy-paste from my configs. :-)

dropky

jr. member

Activity: 132

Merit: 7

EvgeniyKorepov

newbie

Activity: 42

Merit: 0

Quote from: dimytr on May 14, 2018, 04:47:03 PM

Guys, could someone share the .json file for 6 videocards for equihash (EU) which works nice for you.

Code:

[
{"time":1,"commands":[
{"id":1,"method":"subscribe","params":["nhmp.eu.nicehash.com:3200","Bitcoin_Address.Worker_Name"]}
]},
   {"time":2,"commands":[
   {"id":1,"method":"algorithm.add","params":["equihash"]}
   ]},
{"time":2,"commands":[
{"id":1,"method":"worker.add","params":["equihash","0"]},
{"id":1,"method":"worker.add","params":["equihash","1"]},
{"id":1,"method":"worker.add","params":["equihash","2"]},
{"id":1,"method":"worker.add","params":["equihash","3"]},
{"id":1,"method":"worker.add","params":["equihash","4"]},
{"id":1,"method":"worker.add","params":["equihash","5"]}
]},
{"time":5,"commands":[
{"id":1,"method":"device.set.tdp","params": ["0","95"]},
{"id":1,"method":"device.set.core_delta","params": ["0","100"]},
{"id":1,"method":"device.set.memory_delta","params":["0","680"]},
{"id":1,"method":"device.set.tdp","params": ["1","95"]},
{"id":1,"method":"device.set.core_delta","params": ["1","100"]},
{"id":1,"method":"device.set.memory_delta","params":["1","680"]},
{"id":1,"method":"device.set.tdp","params": ["2","95"]},
{"id":1,"method":"device.set.core_delta","params": ["2","100"]},
{"id":1,"method":"device.set.memory_delta","params":["2","680"]},
{"id":1,"method":"device.set.tdp","params": ["3","95"]},
{"id":1,"method":"device.set.core_delta","params": ["3","100"]},
{"id":1,"method":"device.set.memory_delta","params":["3","680"]},
{"id":1,"method":"device.set.tdp","params": ["4","95"]},
{"id":1,"method":"device.set.core_delta","params": ["4","100"]},
{"id":1,"method":"device.set.memory_delta","params":["4","680"]},
{"id":1,"method":"device.set.tdp","params": ["5","95"]},
{"id":1,"method":"device.set.core_delta","params": ["5","100"]},
{"id":1,"method":"device.set.memory_delta","params":["5","680"]}
]},
{"time":10,"commands":[
{"id":1,"method":"worker.reset","params":["0"]},
{"id":1,"method":"worker.reset","params":["1"]},
{"id":1,"method":"worker.reset","params":["2"]},
{"id":1,"method":"worker.reset","params":["3"]},
{"id":1,"method":"worker.reset","params":["4"]},
{"id":1,"method":"worker.reset","params":["5"]}
]},
{"time":15,"loop":20,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"worker.print.speed","params":["1"]},
{"id":1,"method":"worker.print.speed","params":["2"]},
{"id":1,"method":"worker.print.speed","params":["3"]},
{"id":1,"method":"worker.print.speed","params":["4"]},
{"id":1,"method":"worker.print.speed","params":["5"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]},
{"event":"on_quit","commands":[
{"id":1,"method":"device.set.tdp","params": ["0","100"]},
{"id":1,"method":"device.set.core_delta","params": ["0","0"]},
{"id":1,"method":"device.set.memory_delta","params":["0","0"]},
{"id":1,"method":"device.set.tdp","params": ["1","100"]},
{"id":1,"method":"device.set.core_delta","params": ["1","0"]},
{"id":1,"method":"device.set.memory_delta","params":["1","0"]},
{"id":1,"method":"device.set.tdp","params": ["2","100"]},
{"id":1,"method":"device.set.core_delta","params": ["2","0"]},
{"id":1,"method":"device.set.memory_delta","params":["2","0"]},
{"id":1,"method":"device.set.tdp","params": ["3","100"]},
{"id":1,"method":"device.set.core_delta","params": ["3","0"]},
{"id":1,"method":"device.set.memory_delta","params":["3","0"]},
{"id":1,"method":"device.set.tdp","params": ["4","100"]},
{"id":1,"method":"device.set.core_delta","params": ["4","0"]},
{"id":1,"method":"device.set.memory_delta","params":["4","0"]},
{"id":1,"method":"device.set.tdp","params": ["5","100"]},
{"id":1,"method":"device.set.core_delta","params": ["5","0"]},
{"id":1,"method":"device.set.memory_delta","params":["5","0"]}

]}
]

Or you can try my application. It will help you much more than this JSON :
https://github.com/EvgeniyKorepov/MinerPro-for-NiceHash

P.S. Fixed JSON, thanks dropky! This configuration for the latest versions of the Excavator is 1.5 and newer!

dimytr

newbie

Activity: 33

Merit: 0

Guys, could someone share the .json file for 6 videocards for equihash (EU) which works nice for you.

nitrobg

member

Activity: 413

Merit: 17

Quote from: aviainvestgroup on May 09, 2018, 10:15:57 AM

Please explain: what can i set the parameter for TDP in %, for 63 C ?
What is formula for calculating TDP in % ?
My GPU ASUS 1080TI ROG-STRIX-O11G

BIOS TDP * %, of course.
You can see the stock TDP using GPU-Z or on your card's product page.

aviainvestgroup

newbie

Activity: 11

Merit: 0

Quote from: dropky on May 08, 2018, 01:37:41 AM

Quote from: aviainvestgroup on May 07, 2018, 07:20:03 AM

Dear friend,

Tell me please

I have mining via excavator v.1.4.4

How i can set in bat file or in config file - maximum temperature for gpus, for example 63 C.
If temp will reach 63 C on some kind of GPUs, than miner will slow or pause mining on this GPU

Thank you

Please forgive for bad english

You can use some third-party software (MSI Afterburner for example) and set temperature limit to 63 C or you can use excavator API:

https://github.com/nicehash/excavator/tree/master/api#-devicesettdp

With device.set.tdp method you can set TDP or thermal design power which controls the maximum amount of heat generated by the GPU.

{"id":1,"method":"device.set.tdp","params":["device_id","New TDP limit %"]}

Please explain: what can i set the parameter for TDP in %, for 63 C ?
What is formula for calculating TDP in % ?
My GPU ASUS 1080TI ROG-STRIX-O11G

Topic: excavator by NiceHash - multi-algorithm NVIDIA GPU miner [1.5.6a] - page 2. (Read 179307 times)