Topic: [Forager] v18.08.3 - Multi-Pool profit switching miner (AMD/NVIDIA/CPU) - page 3. (Read 24744 times)

no worries I understand, just leaving this here to help you with bugs.

I am still having issues with Turtle showing on minerrocks. even though the changes are registering in the miners and the pool. I think the config file needs the algos added to the CPU / NVIDIA/AMD section. Ill try to add them and see how it goes

*** no change on my end in adding CnPico, CnTurtle, CnTrtl to algos listed in config.ini ***

I think lethean was a algo problem, I will try on fairpool with the new miners. in v19.02

*** fairpool lethean connected, but Fairpool is another that wont work under automatic miner settings. only works when set to manual/ coin ****

interesting note, while talking to the turtle network guys on discord. CryptoKnight shut down their turtle coin pool, but yet it shows up when the miner starts with it set to manual coin. ( and if you go to the pools site, sure enough its not there )

I will review tomorrow, I know there are some more issues, just dont have time right now.

Currently you can find lethean on FairPool as well. I just updated it today (in git)

I just edited a bit, added a few issues. I will grab the new stuff from git and report back. thanks

yeah if the algo matches I dont think trtlstak is necessary

Thank you. Appreciate it


Fixed for miner.rocks pushed to git

Also, fixed CnTurtle algo in the miners, so you have enough options


I will update CryptoKnight tomorrow.
Not sure trtlstak  is necessary. You should be able to mine now

1. awesome miner! thanks for the hard work.

I got an issue with minerrocks and turtle coin I want to bounce off you, So I have the config file set. When I run autostart with the filters I want It grabs 3 pools ( MSR/QRL/GRAFT ) and everything works fine. but TRTL ( turtlecoin ) pool isnt found on minerrocks. if I filter down to JUST TRTL coin. it returns "NO POOLS!"

I tried to get on a different pool using the start.bat and choosing manual coin mode. cryptoKnight shows turtlecoin but the algo is the old one so It doesnt work. turtlecoin forked to CN-trtl recently and cryptoKnight shows it as cnlitev7. so it never mines.

posted on minerrocks discord 1-29-19 "Turtlecoin will fork from 1,200,000 (in two days) to new POW - cn-trtl ( https://github.com/turtlecoin/turtlecoin/releases )
Please use trtlstak 2.7.3 ( https://github.com/turtlecoin/trtl-stak/releases ) and new ports: 5003, 5005, 5007.
Other ports will be closed during fork."

might need to add trtlstak 2.7.3 for good measure to the miners. but I have used xmrig ( command line only ) to mine it setting currency to turtlecoin

and suggestions as to whats going on, and why the minerrocks pool isnt linking? another note actually. if you try to just show a coin list for minerrocks, it shows NOTHING. where the cryptoKnight pool returns coins that match my config. where minerrocks wont ( even though MSR/QRL/GRAFT work )

also I thought I read on here you have a discord channel for this, can you link me?

**** I have been investigating a few things to see if I can figure this out. some other issues popped up ****

I found that the pool CryptoKnight has similar pools as minerrocks. so I wanted to verify on that pool, if turtle etc is working.

1. when I set mining mode to Automatic I get a response of "mining mode not available for this pool" - setting it to manual mode gets it going, but defeats the multipool idea.

2. in manual mode, I set the coin to turtle - it fails because the algorithm is setting as lite-v7 not cntrtl, this is on the JCP cpu miner, and xmrig. somewhere its defaulting to the old algo for turtle.

3. I have lethean coin - previously intensecoin - cryptoKnight has a pool for it, but it wont recognize it when I start the miner. lethean is Cnv8

just upgraded from 19.01-19.02 no change in any of this

Forager 19.02 released
https://github.com/yuzi-co/Forager/releases

Changelog:
- GMiner 1.32
- TTMiner 2.1.10
- SGMinerMTP 0.1.0
- Nanominer 1.0.7
- rhminer 1.2
- WildRigMulti 0.15.3.8
- SGMinerFancyIX 0.5ip3
- BMiner 14.3.1
- XMRig 2.12
- XMR-Stak 2.8.2
- NBMiner 14.0
- lolMiner 0.7a5
- SRBMiner 1.7.8
- GrinPro 1.1
- JCEMiner AMD 0.33b18
- JCEMiner CPU 0.33q
- TeamRed 0.3.10
- CryptoDredge 0.16.2
- EnergiMiner 2.2.1
- CCMinerTpuvot 2.3.1
- CPUMinerRplant
- TRex 0.9.2

Algo cleanup for CPU and AMD miners
Some core changes
Pool updates: WhatToMine, NiceHash, Zergpool

it works great, thx!

I missed the device selection config option.
Fix is in the git

Hi,

For fun I configured a rig with separate groups: 1080ti and 1070 to test c31
When runing all benches again,
I noticed a problem with TT-miner when groups are configured, it's ignoring the configured devices. what do you need to nail it down?

For AMD and CPU, I usually just remove or disable miners are significantly slower. But if they are close, I do prefer to keep a few variants in case it it works better on different hardware.
For NVIDIA, I can't test much since I don't own NVIDIA hardware

would it be possible to leave the algos out of the config, if it's known that miner perfoms weaker?
it will save some time in the benchmarks
just an idea

Good to hear. Thank you )

thank you, it's working now. keep up the good work!

oh  crap, i got it... your locale settings put a "," and not "."

I'll post a fix soon


EDIT: pushed fix to git

wrapper is showing hashrate, but it's not going to forager window and not displayed and not calculating anything.

Strange. Should look like http://prntscr.com/met8l8

it's not showing any speed now in the window. I updated all files.

Thank you.

Pushed an update to git that should parse it properly.

here it is:
https://ibb.co/dpv3fbh

Ok, there seems to be a problem Energiminer speed detection, can you send a screenshot of the miner window that is showing the speed?


P.S.
Just a rant... I dont understand why Energiminer fork from Ethminer and release the miner completely cutting out the API...