Pages:
Author

Topic: FPGA development board "Lancelot" - accept bitsteam developer's orders. - page 6. (Read 101892 times)

sr. member
Activity: 337
Merit: 252
He seems to have moved on to catch bigger fish. A shame really.
hero member
Activity: 728
Merit: 540
Err,

ngzhang ? Weren't you supposed to deliver a faster bitstream for the Lancelot any time ?

legendary
Activity: 1610
Merit: 1000
flynn,
Which version of cgminer are you using? I am not quite sure that it works beter because utilty is too low it should be aroung > 5.5
Old versions of cgminer were not showing any HW errors. Pls double check the results and compare your hashrate with your pool stats...


cgminer 2.4.2

I am unable to download the latest version from github rightnow, it seems broken or something. I'll retry later
Meanwhile I put back the old bitstream :
  ICA 0:                | 378.7/372.6Mh/s | A:20 R:0 HW:0 U: 7.03/m


The old one is OK what you can see is the U: 7.03/m - That is fine...When you run it for longer U  will be about 5-5.5
hero member
Activity: 728
Merit: 540
flynn,
Which version of cgminer are you using? I am not quite sure that it works beter because utilty is too low it should be aroung > 5.5
Old versions of cgminer were not showing any HW errors. Pls double check the results and compare your hashrate with your pool stats...


cgminer 2.4.2

I am unable to download the latest version from github rightnow, it seems broken or something. I'll retry later
Meanwhile I put back the old bitstream :
  ICA 0:                | 378.7/372.6Mh/s | A:20 R:0 HW:0 U: 7.03/m

legendary
Activity: 1610
Merit: 1000
Before we get anything better, the Icarus 200Mhz-test bitstream is working fine on my Lancelot =>

 ICA 0:                | 399.4/397.4Mh/s | A:207 R:1 HW:0 U:3.50/m

flynn,
Which version of cgminer are you using? I am not quite sure that it works beter because utilty is too low it should be aroung > 5.5
Old versions of cgminer were not showing any HW errors. Pls double check the results and compare your hashrate with your pool stats...
hero member
Activity: 728
Merit: 540
Before we get anything better, the Icarus 200Mhz-test bitstream is working fine on my Lancelot =>

 ICA 0:                | 399.4/397.4Mh/s | A:207 R:1 HW:0 U:3.50/m
legendary
Activity: 1610
Merit: 1000
ngzang,
Is it safe to try 200 MHZ test bitstrem with lancelot. What i am asking if is  possible to "kill" the board while priograming it? Waht is the original bitsream flashed inside lancelots (for recovering purpose)
Shall we expect your bitstream to be available soon?
10X
PS:Week is passing and we do have half of the big news as prommised - the core picture only Wink
hero member
Activity: 585
Merit: 501
Quote
Any pricing available yet?
Since DVB just sponsors the QCool watercool adapter for Lancelot and is not involved in sales, i can only say that the price will be probably between 4 and 8 BTC. It is sure that the price will be lower when more QCool elements can be produced at once.

hero member
Activity: 742
Merit: 500
Its as easy as 0, 1, 1, 2, 3
Any pricing available yet?
hero member
Activity: 585
Merit: 501
Quote
The new water cooling unit that dvb is funding, will you be working with them directly to integrate it onto the lancelot boards?

The Qcool element is simply mountable on the Lancelot board the same way the actual cooler is mounted.

hero member
Activity: 742
Merit: 500
Its as easy as 0, 1, 1, 2, 3
The new water cooling unit that dvb is funding, will you be working with them directly to integrate it onto the lancelot boards?
legendary
Activity: 1029
Merit: 1000
It is good, but developing bitstream will be slower than writing some C program. Or you may implement some softcore CPU and write program for it. For both solutions you need some A/D converters.
legendary
Activity: 1792
Merit: 1111
ngzhang is it possible use the Lancelot board for other purposes like mining? I mean can it be used for controlling a ECA Reactor and pumps like Volt and Amps, and the Data from meters like PH Electrode, ORP Electrode, Conductivity Electrode and even output it to a small display/touchscreen?

I don't think Lancelot is good at these. But you can do all these with a $35 Raspberry Pi through USB
hero member
Activity: 585
Merit: 501
ngzhang is it possible use the Lancelot board for other purposes like mining? I mean can it be used for controlling a ECA Reactor and pumps like Volt and Amps, and the Data from meters like PH Electrode, ORP Electrode, Conductivity Electrode and even output it to a small display/touchscreen?
hero member
Activity: 607
Merit: 500
what s the status of the new bitstream?
ok we will have asics but until then are we talking about 500Mh per board? (icarus,lancelot)
thanks
legendary
Activity: 1092
Merit: 1001
Eh... If the patch.exe is a crack/keygen for Altium Designer this kind of sounds logical Smiley

yeah.. that was my assumption... so  ssshhh! Wink
sr. member
Activity: 349
Merit: 250
Eh... If the patch.exe is a crack/keygen for Altium Designer this kind of sounds logical Smiley
hero member
Activity: 728
Merit: 540
For those who ordered dev kit. There's trojan (Dynamer) on USB stick in file patch.exe, Altium Designer folder. Microsoft Security Essential reports that way. Don't have other antiviruses, so please confirm (or confirm that is not Wink ) if you have any.

When that new bitstream will be achievable?


clamscan *
patch.exe: Trojan.Win32.Crack FOUND

ouch Sad

Upload to VirusTotal and check the output. This might be a false positive.

ok


AhnLab-V3    Win-Trojan/Keygen.64512    20120612
... (snip for readability, ok it's confirmed that it's looking bad)
VirusBuster    Trojan.Keygen!XY128t5G1XY    20120612

sr. member
Activity: 349
Merit: 250
For those who ordered dev kit. There's trojan (Dynamer) on USB stick in file patch.exe, Altium Designer folder. Microsoft Security Essential reports that way. Don't have other antiviruses, so please confirm (or confirm that is not Wink ) if you have any.

When that new bitstream will be achievable?


clamscan *
patch.exe: Trojan.Win32.Crack FOUND

ouch Sad

Upload to VirusTotal and check the output. This might be a false positive.
hero member
Activity: 728
Merit: 540
For those who ordered dev kit. There's trojan (Dynamer) on USB stick in file patch.exe, Altium Designer folder. Microsoft Security Essential reports that way. Don't have other antiviruses, so please confirm (or confirm that is not Wink ) if you have any.

When that new bitstream will be achievable?


clamscan *
patch.exe: Trojan.Win32.Crack FOUND

ouch Sad
Pages:
Jump to: