Topic: [free] help with your stuck transaction - page 2. (Read 4923 times)

So just a follow-up for anyone who's been reading this and has come across the same issue as me, here's what a dropped transaction looks like:

https://blockchain.info/tx/709c8e5894b8eb55b4a7dcc222c88a000578dcb179a5dff06db40af7630a99cb

I was able to resend my bitcoin, but pheeeeew fees are high! Let's hope it goes through this time

Alright, I have tried following the tutorial, but getting stuck far too soon already lol. I think I will need some more time to learn slowly and will keep working on it. For now, would you be so kind to create the double spend tx with around 700sat/byte from the 1Nejxrk4Y9Q2eQ6YTd3hMi46uSnnN4Ghbn wallet?

Thanks bud

Hey Guys,

Transaction I should really get through..
Stuck for 36 hours.

transaction id: 7d161c5f554ba68f1af3a9e826864a6bc0dc97f891ccd4c2ee11a998fa44d1ca
Sender/Receiver: Receiver
Address:
Mine: 13oivRgGoLjnhXAaJrFHrvHWMDEtKH8y6U
Sender: 1QHkxnnBfdhZJBkjPfo2ri1RQ62gvhSA5T
wallet software: Blockchain.info
mempool: It's in the mempool
https://blockchain.info/tx/7d161c5f554ba68f1af3a9e826864a6bc0dc97f891ccd4c2ee11a998fa44d1ca
something strange: It looks like it also has a former unconfirmed transaction too.. I have sent mine to binance exchange to invest in ICX
rectified situation: Hate blockchain.info, will not use them anymore..

Any help is much appreciated!

OK thanks for the quick reply.
I don't think technically i can do options 1-2, I do not know where to start. And bread wallet is very limited, I will switch to another wallet.
And I understand that you cannot somehow execute those options either, correct ?
Is there a trusted pool you can link to? I have so far heard of pushtx.btc.com, is it legit?
Thanks alot!

I was sending from my tab wallet running github Bitwallet to myself on a website - but do not really have control of the web wallet just its spending balance - which it wont let me do until 2 confirmations - how do I re-broadcast?

Hello All - I've been struggling to understand what could be holding up a transaction I made a few days ago.  I use the bitcoin-qt client and used it's fee calculator (I set to 40 minutes which worked fine for 2 transactions 2 days before that).  I have also made a transaction since this "stuck" one without problems. Some of the details:

Status: 0/unconfirmed, in memory pool
Date: 12/19/17 19:30
To: XXXXXXXX 3KSheFnMYCrtCqakBnU8L4VKPPMztkhSDa
Debit: -42.50000000 BTC
Transaction fee: -0.00709452 BTC
Net amount: -42.50709452 BTC
Transaction ID: c33be8f735d280826cd13dbdee0e286b6b7268c80998f7835537bf1e9a85ec96
Transaction total size: 1872 bytes
Output index: 0

I paid almost 379 sat/B which should have been enough 2 days ago (I trusted the fee calculator in my client).  I've tried some of the free accelerators but I am not sure they do much of anything given the huge trading volumes we're all suffering through.  I've been reading a lot about the backup as of late - is my only option to wait for this transaction to kick out of the memory pool?  Any way I can accelerate the kick-out (or ensure I don't accidentally extend it)?  Any ideas/help would be appreciated.

Can you please process this transaction? 6fa701e74f81ca64c43ee0621124c091dd90fcad4df195f3d751530cda2c66d5

It uses a fee of 200 sat/byte. The payment was sent to me, so I may not be able to provide TxRaw, wallet used, etc.

e538b854c149db0cec03a43d87525eb6d19eeff26e28d555e7f04821b3051f72

It has a fee of allmost 400 sat/byte, this isn't technically sufficient, but i'm pretty sure that sooner or later, it'll get confirmed as long as you keep rebroadcasting the transaction from time to time.

If you want to speed things up, i'd like to know if you were the sender or receiver (or both) and which wallet software you used.

Hi - This is the first time I have asked for help with this - I understand the basics of bitcoin an have only had a couple of minor issues but two days ago I sent some coins and they are still unconfirmed - I wouldnt have minded but the fee was a third of what I was transfering!! Any way of helping?

tx id : 0ab23d3bb4289c3ceb47941181bb3260310d31e0a64ecbf3190b178d5782a496

raw : 010000000218922b8cd15453c9d2bb146faaf010b5c0061beed89c60562b3ff782f6f321df01000 0006b483045022100bf1825ddec7866e6c6ed8559a96c6161d742e9997689e108c3125aeb599a8c e70220598215964581570836d7eb5abec3c53d7ef180260c40337548e3c8df542b44e2012103ee8 6f37f4b1d7b32507f68d15d16703a82ea0bc7d8dd00dc04e2bac953607c90ffffffffdcfe28a229 17439985633b9cf606b988f136c0e56651e2023f33485c3a3baee80c0000006a47304402200ace5 ebd99b0835a9bbea2b72ac7eace6cef1f92f354139eadc2d6c03b16bbf002202f7ae03ca0992ca3 3f8b72faad429d5fd3dedbd35ea4f8831cbd1d6e8b885d6b012102f67b9fa5e72824199f53a1651 fa94d5592961f35df6f035b21d4abadc3a7a044ffffffff01c2630400000000001976a914e49d58 35776602d86b5e25b10b454fa41afbfd5e88ac00000000

Thanks in advance

00 sat
OK, this one has a fee of  312 sat/byte. Eventough currently the optimal fee is about 900 sat/byte, this one *should* eventually confirm if you wait long enough and make sure you rebroadcast it regularly.
If you want a quick confirmation there are a couple of options:
1) do a CPFP, the problem is that your wallet used the change that was funding your change address    13bq5aDGxanR7TFSdsKhk12JRg8tj1E6gX to create a new transaction, and than another one... So you'll have to use the unspent output funding your second change address to create a CPFP. I don't really know how to sign transactions in breadwallet, so you'll either have to find out if this is possible, or if the private keys can be exported

2) you can double spend the input of this transaction... But transactions that depend on this one will be cancelled, and the same problem as in the first point arises (you need to sign a raw transaction)

3) you can pay a trusted pool to accelerate your tx

4) you can keep rebroadcasting the tx and wait it out

Hello Mocacinno I have 2 unconfirmed transactions:
this is 1 of 2

transaction id: 8915e21875449d2314d6c5b976db421a3b4d6b10a64c54f99bedcb6cc9bf1527
sender/receiver: sender
*** i am confused regarding addresses, this is from blockchain.info which i hope i read correctly ***
addresses: 1JtvqUR1nJJi6q4o5BW13ySrTPfCXCLHBb is my address(sender), 16zdbu8scecfBj7LsCxVTyKdHqTxbMkV92 is the receiver address
wallet software: bread wallet, ios10
mempool: yes, i have checked http://www.mocacinno.com/page/getraw, entered my transaction id, and i was shown the raw transaction, so this transaction is in your mempool
something strange: no, blockchain.info shows unconfirmed transaction
rectified situation: yes, in the future i'll use dynamic fees (will change wallet), and set the slider all the way to the right AND i'll use http://www.mocacinno.com/page/feeestimate for a second opinion

tip: YES about $30 (.002 btc) sent and again same amount if this can actually be helped. THANK YOU !!! transaction id: 8929979db363544d7c3bcdaf20e03f79d15645cc719d4cbeaabca7587d7bd1a1


EDIT: since i cannot post again, i am adding transaction 2:

this is 2 of 2

transaction id: 622a35ba6462bd0a6d1d829a94beab4ca5b26fae615b5d1c20d2fab04b8b61b3
sender/receiver: sender
*** i am confused regarding addresses, this is from blockchain.info which i hope i read correctly ***
addresses: 13bq5aDGxanR7TFSdsKhk12JRg8tj1E6gX is my address(sender), 17NnzRRXVVgBH6rh7adSzx59Ee5kuHEbhy is the receiver address
wallet software: bread wallet, ios10
mempool: yes, i have checked http://www.mocacinno.com/page/getraw, entered my transaction id, and i was shown the raw transaction, so this transaction is in your mempool
something strange: no, blockchain.info shows unconfirmed transaction
rectified situation: yes, in the future i'll use dynamic fees (will change wallet), and set the slider all the way to the right AND i'll use http://www.mocacinno.com/page/feeestimate for a second opinion

tip: YES about $30 (.002 btc) sent and again same amount if this can actually be helped. THANK YOU !!! transaction id: 8929979db363544d7c3bcdaf20e03f79d15645cc719d4cbeaabca7587d7bd1a1

hey, can you take a look at this?

transaction id: fc1b864799a602690812d4383f1b80a6a8ef19eaf947f6d5116f8861bc9b90eb
sender/receiver: both
addresses: 1AKRgMxaSHvTEGmznCextCiWhXjryyTtFA is my address, 1BSH8EFqHMkJ5LWCT4chf8X5R2tCg6FPcW is paper walled address i want to gift for xmass, my change address is 1KkFTUhWkvPRyfmQLqRF5vLtFGksBWmh78
wallet software: mycellium, android - extension of nano ledger s hardware wallet
mempool: yes, i have checked http://www.mocacinno.com/page/getraw, entered my transaction id, and i was shown the raw transaction, so this transaction is in your mempool
something strange: the next two transactions say that there is unconfirmed parent, which is obviously this transaction.
rectified situation: yes, in the future i'll use dynamic fees, and set the slider all the way to the right AND i'll use http://www.mocacinno.com/page/feeestimate for a second opinion

Depends on how your exchange handles this issue...
This is exactly why i keeped asking you for more information... If you'd have said it was a transaction between two exchanges, i would have immediately told you there were only 3 options:
1) keep rebroadcasting your tx and wait it out
2) pay for an acceleration performed by a decent pool
3) contact the exchange, ask them to clean up their mess


Don't upload your private keys to a web wallet, i'd never suggest such an attrocity 
It *might* be possible to use armory to create a double spend, but to be honest, i haven't used armory in a really long time, so i can't give you any advice in this matter... I think HCP might know a bit more about this wallet than i do, maybe he'll chime in?

Thanks for the insight! So I'm assuming I can't use Armory to create a double spend, since it keeps coming up with the txn-mempool-conflict error message? Does that mean I'll need to use my private keys in another wallet (such as Bitcoin Core) to access the funds and do the double-spend from there? Or would it be better to do a CPFP using that method? Not really keen on chucking my private key onto any web wallets if possible...

transaction id: 17251d352922f5453bdbf2fc75d21c867f20dbb6974237f5c6164fb0a046a6a6
sender/receiver: receiver
addresses: 1JDY1GE9cNKAxjd7nn6c88RKtgtoPddj4v was the address for the transaction , 1LormSBB1VUwgxCFuKoLULp7SbUYSqA9q8 is the sender's address
wallet software:   blockchain.info wallet on windows 10
mempool: yes, i have checked http://www.mocacinno.com/page/getraw, entered my transaction id, and i was shown the raw transaction, so this transaction is in your mempool
something strange: yes, I checked for unconfirmed parents and there are transactions beforehand which were not confirmed.
rectified situation: yes, I always make sure I give a proper fee and I will not use a particular exchange anymore and also I'll use http://www.mocacinno.com/page/feeestimate for a second opinion

I'm a big fan of people wanting to learn
The "problem" is that it's easyer to create a raw, unsigned transaction if you're running a synced node (like i am doing), electrum is perfect for signing transactions, but not so good at doublespending unspent outputs that have already been spent.

If you want to learn the basics, you can download the sourcecode of coinb.in, i've actually written a small post on my blog on it's basic usage a long time ago: http://www.mocacinno.com/blog/create-sign-broadcast-transactions-using-coinb/
I wouldn't use coinb.in to sign the transaction tough (so you don't need to follow the complete article).

If you succeeded in creating a double spending tx using coinb.in, please post the unsigned transaction in this thread and i'll review it for you and give you some pointers on how to sign it using electrum

no, it'll not be gone... It'll either be rebroadcasted indefenately, it'll be confirmed or after a long time most the network nodes will have removed it from their mempool and they will act like the transaction never happened.

Wether or not it'll be rebroadcasted: no idear, since you didn't give the information i asked for, and the answer to this question depends on this info.

Wether or not your wallet will react like the transaction never happened: no idear, since you didn't give the information i asked for, and the answer to this question depends on this info.

If your transaction doesn't confirm, and it's not rebroadcasted, the nodes will remove the tx from their mempools and according to the network, it'll be like the tx never existed.

I do appreciate you want to do this for me, but if you don't mind too much, I would prefer to learn how to do this myself.

If you rather just handle this one for me, around 700sat/byte (1.5mBTC) is what Electrum automatically puts the fee on. This is fine if you think that is what it takes at the moment. Take it from 1Nejxrk4Y9Q2eQ6YTd3hMi46uSnnN4Ghbn. I do see a Sign and Broadcast button when I preview a transaction, so I should be able to handle it from there.

Thanks again.

Hi I am hoping someone could help me out.... I have been waiting 3 days for this transaction to go through and it's still saying unconfirmed. is there anything I can do. I've tried Via btc  (Submissions beyond limit) & Confirm TX (invalid transaction) I know the fee is small which hasn't helped but this is my total funds.

Status: 0/unconfirmed, in memory pool
Date: 12/18/2017 09:05
To: colins BCOIN 3Cf4Yp8XkQHoux8qarTFGdfeUTCNNugKYM
Debit: -0.05913708 BTC
Transaction fee: -0.00000190 BTC
Net amount: -0.05913898 BTC
Transaction ID: d3082c4348ef2c8c8b0fe49351f8ae0e29998e97636491c0aa72f5927f334624
Transaction total size: 190 bytes
Output index: 0